[PATCH 0/2] spacemit: k1: two small fixes found on a Milk-V Jupiter

[Hung-Chun Tseng <alan.tseng.cs@gmail.com>]

Two small fixes I ran into while booting the mainline SPL and U-Boot
from an SD card on a Milk-V Jupiter.

Patch 1 enables the GigaDevice SPI NOR ID table, which the Jupiter's
GD25Q64 needs; "sf probe" detects it on the board with the patch.

Patch 2 initialises the EEPROM index that read_ddr_info() passes to
read_tlvinfo_tlv_eeprom(). It is build-tested only; on the Jupiter the
current compiler happens to pass 0 already, and the DDR TLV fields are
read correctly.

Hung-Chun Tseng (2):
  configs: k1: enable GigaDevice SPI NOR flash support
  spacemit: k1: initialise the EEPROM index in read_ddr_info()

 board/spacemit/k1/spl.c       | 2 +-
 configs/spacemit_k1_defconfig | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

-- 
2.43.0