[PATCH 3/5] arm64: dts: rockchip: fix GMAC clock setup on BPI-R2 Pro

[Coia Prant <coiaprant@gmail.com>]

Both GMAC nodes rely on the internal 125 MHz GMAC main clock, but
neither pins its rate explicitly. Add assigned-clock-rates = <0>,
<125000000> so SCLK_GMACx is fixed at 125 MHz instead of whatever the
bootloader or the hardware reset left. The RGMII speed clock
(SCLK_GMACx_RX_TX) stays at 0, since it is managed at runtime by
rk_set_clk_tx_rate().

For gmac0, also switch clock_in_out from "input" to "output". The port
uses a fixed-link, and there is no external 125 MHz clock feeding the
MAC, so "input" described a clock source that is not wired up. Note
that on RK3568 clock_in_out does not change the hardware clock routing
today (rk3568_ops has no io_clksel masks), so this corrects the
description rather than the behaviour.

Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 4d3ebe50b90ba..677b6261a3a1e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -206,7 +206,8 @@ &combphy2 {
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
-	clock_in_out = "input";
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
@@ -232,6 +233,7 @@ fixed-link {
 &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii";
-- 
2.47.3