From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Christian Marangi <ansuelsmth@gmail.com>,
Daniel Golle <daniel@makrotopia.org>,
Qingfang Deng <dqfext@gmail.com>,
SkyLake Huang <SkyLake.Huang@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Joris Vaisvila <joey@tinyisr.com>,
Ahmed Naseef <naseefkm@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH net-next v4 3/6] net: phy: mediatek: generalize cal_cycle function for GE SoC
Date: Tue, 3 Nov 2026 23:14:34 +0100 [thread overview]
Message-ID: <20261103221439.30502-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20261103221439.30502-1-ansuelsmth@gmail.com>
In preparation for support of special Software Calibration for Airoha PHY,
it's needed to generalize the cal_cycle function as Airoha needs only
part of its logic (the wait logic) to complete a calibration cycle.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 32 ++++++++++++++++++---------
drivers/net/phy/mediatek/mtk-ge-soc.h | 3 +++
2 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
index 2b1e9923db98..f3ce6e67eb38 100644
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -39,20 +39,11 @@ struct mtk_socphy_shared {
struct mtk_socphy_priv priv[4];
};
-/* One calibration cycle consists of:
- * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
- * until AD_CAL_COMP is ready to output calibration result.
- * 2.Wait until DA_CAL_CLK is available.
- * 3.Fetch AD_CAL_COMP_OUT.
- */
-static int cal_cycle(struct phy_device *phydev, int devad,
- u32 regnum, u16 mask, u16 cal_val)
+int mtk_cal_cycle_wait(struct phy_device *phydev)
{
int reg_val;
int ret;
- phy_modify_mmd(phydev, devad, regnum,
- mask, cal_val);
phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
MTK_PHY_DA_CALIN_FLAG);
@@ -71,7 +62,26 @@ static int cal_cycle(struct phy_device *phydev, int devad,
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP);
if (ret < 0)
return ret;
- ret = FIELD_GET(MTK_PHY_AD_CAL_COMP_OUT_MASK, ret);
+
+ return FIELD_GET(MTK_PHY_AD_CAL_COMP_OUT_MASK, ret);
+}
+EXPORT_SYMBOL_GPL(mtk_cal_cycle_wait);
+
+/* One calibration cycle consists of:
+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
+ * until AD_CAL_COMP is ready to output calibration result.
+ * 2.Wait until DA_CAL_CLK is available.
+ * 3.Fetch AD_CAL_COMP_OUT.
+ */
+static int cal_cycle(struct phy_device *phydev, int devad,
+ u32 regnum, u16 mask, u16 cal_val)
+{
+ int ret;
+
+ phy_modify_mmd(phydev, devad, regnum,
+ mask, cal_val);
+
+ ret = mtk_cal_cycle_wait(phydev);
phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
return ret;
diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.h b/drivers/net/phy/mediatek/mtk-ge-soc.h
index 008efd148a2c..14370b5ce482 100644
--- a/drivers/net/phy/mediatek/mtk-ge-soc.h
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.h
@@ -354,4 +354,7 @@ enum CAL_MODE {
SW_M
};
+/* MTK GE SoC common functions */
+int mtk_cal_cycle_wait(struct phy_device *phydev);
+
#endif /* _MTK_GE_SOC_H_ */
--
2.55.0
next prev parent reply other threads:[~2026-11-03 22:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 22:14 [PATCH net-next v4 0/6] net: phy: mediatek: calibration for AN7581/3 Christian Marangi
2026-11-03 22:14 ` [PATCH net-next v4 1/6] net: phy: mediatek: export __mtk_tr_write Christian Marangi
2026-11-04 2:32 ` Andrew Lunn
2026-11-03 22:14 ` [PATCH net-next v4 2/6] net: phy: mediatek: move MTK GE SoC registers define to dedicated header Christian Marangi
2026-11-04 2:33 ` Andrew Lunn
2026-11-03 22:14 ` Christian Marangi [this message]
2026-11-04 2:34 ` [PATCH net-next v4 3/6] net: phy: mediatek: generalize cal_cycle function for GE SoC Andrew Lunn
2026-11-03 22:14 ` [PATCH net-next v4 4/6] net: phy: mediatek: split Airoha code to dedicated source Christian Marangi
2026-11-04 2:38 ` Andrew Lunn
2026-11-03 22:14 ` [PATCH net-next v4 5/6] net: phy: mediatek: add calibration logic for AN7581 Christian Marangi
2026-11-04 3:47 ` Andrew Lunn
2026-11-04 18:24 ` Christian Marangi
2026-11-04 20:51 ` Andrew Lunn
2026-11-04 22:38 ` Benjamin Larsson
2026-11-05 22:47 ` Andrew Lunn
2026-11-06 12:09 ` Christian Marangi
2026-11-03 22:14 ` [PATCH net-next v4 6/6] net: phy: mediatek: add calibration logic for AN7583 Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261103221439.30502-4-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=SkyLake.Huang@mediatek.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=joey@tinyisr.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=naseefkm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.