All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/5] gpio: ppc44x: factor out the OSR/TSR source selection
Date: Wed,  4 Nov 2026 13:59:56 -0800	[thread overview]
Message-ID: <20261104215959.24035-3-rosenp@gmail.com> (raw)
In-Reply-To: <20261104215959.24035-1-rosenp@gmail.com>

Both direction callbacks clear the pin's 2-bit field in the output
source and three-state source registers, picking the low or high
register by bank. Move that into a helper instead of duplicating the
if/else in each callback.

No functional change; the registers are written in the same order.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/gpio/gpio-ppc44x.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-ppc44x.c b/drivers/gpio/gpio-ppc44x.c
index 01dd5e7cc311..b3cbc832cf24 100644
--- a/drivers/gpio/gpio-ppc44x.c
+++ b/drivers/gpio/gpio-ppc44x.c
@@ -64,6 +64,21 @@ static inline void ppc44x_setbits32(void __iomem *addr, u32 mask)
 	iowrite32be(val, addr);
 }
 
+/*
+ * Route the pin's output and three-state control to the GPIO controller
+ * rather than an alternate function. Bits 0-15 use OSRL/TSRL, bits 16-31
+ * use OSRH/TSRH.
+ */
+static void ppc44x_gpio_select_gpio(struct ppc44x_gpio __iomem *regs,
+				    unsigned int gpio)
+{
+	__be32 __iomem *osr = gpio < 16 ? &regs->osrl : &regs->osrh;
+	__be32 __iomem *tsr = gpio < 16 ? &regs->tsrl : &regs->tsrh;
+
+	ppc44x_clrbits32(osr, GPIO_MASK2(gpio));
+	ppc44x_clrbits32(tsr, GPIO_MASK2(gpio));
+}
+
 /*
  * GPIO LIB API implementation for GPIOs
  *
@@ -99,14 +114,7 @@ static int ppc44x_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 	ppc44x_clrbits32(&regs->tcr, GPIO_MASK(gpio));
 	gen_gc->sdir &= ~GPIO_MASK(gpio);
 
-	/* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
-	if (gpio < 16) {
-		ppc44x_clrbits32(&regs->osrl, GPIO_MASK2(gpio));
-		ppc44x_clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
-	} else {
-		ppc44x_clrbits32(&regs->osrh, GPIO_MASK2(gpio));
-		ppc44x_clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
-	}
+	ppc44x_gpio_select_gpio(regs, gpio);
 
 	return 0;
 }
@@ -130,14 +138,7 @@ ppc44x_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	ppc44x_setbits32(&regs->tcr, GPIO_MASK(gpio));
 	gen_gc->sdir |= GPIO_MASK(gpio);
 
-	/* Bits 0-15 use TSRL, bits 16-31 use TSRH */
-	if (gpio < 16) {
-		ppc44x_clrbits32(&regs->osrl, GPIO_MASK2(gpio));
-		ppc44x_clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
-	} else {
-		ppc44x_clrbits32(&regs->osrh, GPIO_MASK2(gpio));
-		ppc44x_clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
-	}
+	ppc44x_gpio_select_gpio(regs, gpio);
 
 	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
 
-- 
2.56.0


  parent reply	other threads:[~2026-11-04 22:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 21:59 [PATCH 0/5] gpio: ppc44x: assorted cleanups Rosen Penev
2026-11-04 21:59 ` [PATCH 1/5] gpio: ppc44x: drop redundant label and parent assignments Rosen Penev
2026-11-04 21:59 ` Rosen Penev [this message]
2026-11-04 21:59 ` [PATCH 3/5] gpio: ppc44x: fold __ppc44x_gpio_set() into ppc44x_gpio_dir_out() Rosen Penev
2026-11-09  9:02   ` Bartosz Golaszewski
2026-11-04 21:59 ` [PATCH 4/5] gpio: ppc44x: use BIT() and GENMASK() for the pin masks Rosen Penev
2026-11-04 21:59 ` [PATCH 5/5] gpio: ppc44x: tidy up includes and probe Rosen Penev
2026-11-09  9:01   ` Bartosz Golaszewski
2026-11-09 11:30     ` Uwe Kleine-König
2026-11-09 20:46       ` Rosen Penev
2026-11-10  8:50         ` Uwe Kleine-König
2026-11-10  9:02         ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261104215959.24035-3-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=brgl@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.