FAILED: patch "[PATCH] media: marvell: mcam: stop DMA and cancel s_bh_work before" failed to apply to 6.6-stable tree

FAILED: patch "[PATCH] media: marvell: mcam: stop DMA and cancel s_bh_work before" failed to apply to 6.6-stable tree

[gregkh]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 0f29f84317c1e35f6a9265277be33e60d3fc8c1c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026110429-consent-correct-15d0@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0f29f84317c1e35f6a9265277be33e60d3fc8c1c Mon Sep 17 00:00:00 2001
From: Fan Wu <fanwu01@zju.edu.cn>
Date: Fri, 7 Aug 2026 05:35:53 +0000
Subject: [PATCH] media: marvell: mcam: stop DMA and cancel s_bh_work before
 freeing DMA buffers

In vmalloc mode the frame-completion IRQ queues mcam_frame_work() on
cam->s_bh_work, which memcpy()s from the dma_bufs[] that
mcam_free_dma_bufs() frees with dma_free_coherent().  mccic_shutdown()
frees those buffers without stopping the controller, so while streaming
a late frame IRQ can re-arm the work after the buffers are gone, causing a
use-after-free.

Stop the controller in mccic_shutdown() when streaming is still active
(gated on an open fd, which holds a runtime-PM reference, so the device
is powered), cancel s_bh_work in mcam_free_dma_bufs(), and move
INIT_WORK() into mccic_register() before the device can be published.

Fixes: 67a8dbbc4e04 ("[media] marvell-cam: Basic working MMP camera driver")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

diff --git a/drivers/media/platform/marvell/mcam-core.c b/drivers/media/platform/marvell/mcam-core.c
index c1e8a2a3012d..2d0b8b60c509 100644
--- a/drivers/media/platform/marvell/mcam-core.c
+++ b/drivers/media/platform/marvell/mcam-core.c
@@ -406,6 +406,8 @@ static void mcam_free_dma_bufs(struct mcam_camera *cam)
 {
 	int i;
 
+	cancel_work_sync(&cam->s_bh_work);
+
 	for (i = 0; i < cam->nbufs; i++) {
 		dma_free_coherent(cam->dev, cam->dma_buf_size,
 				cam->dma_bufs[i], cam->dma_handles[i]);
@@ -1306,7 +1308,6 @@ static int mcam_setup_vb2(struct mcam_camera *cam)
 		break;
 	case B_vmalloc:
 #ifdef MCAM_MODE_VMALLOC
-		INIT_WORK(&cam->s_bh_work, mcam_frame_work);
 		vq->ops = &mcam_vb2_ops;
 		vq->mem_ops = &vb2_vmalloc_memops;
 		cam->dma_setup = mcam_ctlr_dma_vmalloc;
@@ -1864,6 +1865,12 @@ int mccic_register(struct mcam_camera *cam)
 		goto out;
 	}
 
+#ifdef MCAM_MODE_VMALLOC
+	/* Init before sensor bind: armed by IRQ, cancelled on probe-error paths. */
+	if (cam->buffer_mode == B_vmalloc)
+		INIT_WORK(&cam->s_bh_work, mcam_frame_work);
+#endif
+
 	mutex_init(&cam->s_mutex);
 	cam->state = S_NOTREADY;
 	mcam_set_config_needed(cam, 1);
@@ -1922,10 +1929,15 @@ void mccic_shutdown(struct mcam_camera *cam)
 	 * take it down again will wedge the machine, which is frowned
 	 * upon.
 	 */
+	mutex_lock(&cam->s_mutex);
 	if (!list_empty(&cam->vdev.fh_list)) {
 		cam_warn(cam, "Removing a device with users!\n");
+		/* Stop so the IRQ can't re-arm s_bh_work after the buffers are freed. */
+		if (cam->state == S_STREAMING)
+			mcam_ctlr_stop_dma(cam);
 		sensor_call(cam, core, s_power, 0);
 	}
+	mutex_unlock(&cam->s_mutex);
 	if (cam->buffer_mode == B_vmalloc)
 		mcam_free_dma_bufs(cam);
 	v4l2_ctrl_handler_free(&cam->ctrl_handler);