FAILED: patch "[PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for GameSir G7 SE" failed to apply to 5.10-stable tree

FAILED: patch "[PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for GameSir G7 SE" failed to apply to 5.10-stable tree

[Sasha Levin]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 40224df29729618ecd88c5c0077e71b1e82c7a3a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107062038-failed-5.10-40224df29729@kernel.org' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 40224df29729618ecd88c5c0077e71b1e82c7a3a Mon Sep 17 00:00:00 2001
From: Ali Resool Tuama <aliresool567@gmail.com>
Date: Fri, 2 Oct 2026 20:42:12 +0300
Subject: [PATCH] USB: quirks: add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for
 GameSir G7 SE

The GameSir G7 SE wired controller first enumerates as 3537:10a0 and
then re-enumerates in a mode it picks from how the host enumerated it.

When the configuration descriptor is fetched the Linux way, 9 bytes
followed by the full 80, the controller disconnects about 1 ms after
its string descriptors have been read, before SET_CONFIGURATION, and
comes back as 3537:1082, a generic HID gamepad without force feedback.

When the configuration descriptor is fetched in one 255-byte request,
as Windows does, it comes back as 3537:1010 in Xbox One (GIP) mode,
which xpad already supports, including rumble.

Skipping the device qualifier requests (USB_QUIRK_DEVICE_QUALIFIER)
makes no difference; the configuration descriptor request size alone
decides the mode. Add USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE for the 10a0
identity, as is already done for the ShanWan Wireless Gamepad.

Cc: stable <stable@kernel.org>
Assisted-by: claude-opus-5-5
Signed-off-by: Ali Resool Tuama <aliresool567@gmail.com>
Link: https://patch.msgid.link/20261002-master-v2-1-24b05d8792b5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index b5b577f0b931c..a4bcbe9c913cf 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -612,6 +612,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* ezcap401 - BOS descriptor fetch hangs at SuperSpeed Plus */
 	{ USB_DEVICE(0x32ed, 0x0401), .driver_info = USB_QUIRK_NO_BOS },
 
+	/* GameSir G7 SE */
+	{ USB_DEVICE(0x3537, 0x10a0), .driver_info = USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE },
+
 	/* DELL USB GEN2 */
 	{ USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
 
-- 
2.53.0