From: Hongyan Xu <getshell@seu.edu.cn>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>,
Daire McNamara <daire.mcnamara@microchip.com>,
Conor Dooley <conor.dooley@microchip.com>,
Robert Richter <rric@kernel.org>,
Zhou Wang <wangzhou1@hisilicon.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Krzysztof Wilczynski <kwilczynski@kernel.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, Hongyan Xu <getshell@seu.edu.cn>
Subject: [PATCH 3/3] PCI: thunder-pem, hisi, thunder-ecam: Fix ECAM config window use-after-free
Date: Sun, 8 Nov 2026 18:56:39 +0800 [thread overview]
Message-ID: <20261108105640.875-4-getshell@seu.edu.cn> (raw)
In-Reply-To: <20261108105640.875-1-getshell@seu.edu.cn>
thunder-pem, hisi and thunder-ecam set .probe = pci_host_common_probe but
have no ->remove, so unbinding only runs devres_release_all():
gen_pci_unmap_cfg() -> pci_ecam_free() frees the ECAM config window while
the bus tree stays registered - only pci_remove_bus() unlinks a bus, and
only pci_host_common_remove() reaches it for a root bus. The next config
access in pci_ecam_map_bus() reads cfg->ops->bus_shift.
Trigger: DT overlay removal of the node that supplied or enabled it.
Fix: give each driver the same .remove = pci_host_common_remove that
pci-host-generic.c got in commit 01fcb7f777a9 ("PCI: Add support for
unbinding the generic PCI host controller"), so the unlink comes first.
Fixes: f12b76e56ada ("PCI: thunder: Add PCIe host driver for ThunderX processors")
Fixes: a2ec1996098c ("PCI: hisi: Add DT almost-ECAM support for Hip06/Hip07 host controllers")
Fixes: 7b6e7ba8e81a ("PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
---
drivers/pci/controller/dwc/pcie-hisi.c | 1 +
drivers/pci/controller/pci-thunder-ecam.c | 1 +
drivers/pci/controller/pci-thunder-pem.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-hisi.c b/drivers/pci/controller/dwc/pcie-hisi.c
index 3c17897e56fc..5ed58e5db797 100644
--- a/drivers/pci/controller/dwc/pcie-hisi.c
+++ b/drivers/pci/controller/dwc/pcie-hisi.c
@@ -169,6 +169,7 @@ static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
static struct platform_driver hisi_pcie_almost_ecam_driver = {
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
.driver = {
.name = "hisi-pcie-almost-ecam",
.of_match_table = hisi_pcie_almost_ecam_of_match,
diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c
index b5b4a958e6a2..4745f5d00b5a 100644
--- a/drivers/pci/controller/pci-thunder-ecam.c
+++ b/drivers/pci/controller/pci-thunder-ecam.c
@@ -358,6 +358,7 @@ static struct platform_driver thunder_ecam_driver = {
.suppress_bind_attrs = true,
},
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
};
builtin_platform_driver(thunder_ecam_driver);
diff --git a/drivers/pci/controller/pci-thunder-pem.c b/drivers/pci/controller/pci-thunder-pem.c
index 5fa037fb61dc..80cabbf263be 100644
--- a/drivers/pci/controller/pci-thunder-pem.c
+++ b/drivers/pci/controller/pci-thunder-pem.c
@@ -474,6 +474,7 @@ static struct platform_driver thunder_pem_driver = {
.suppress_bind_attrs = true,
},
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
};
builtin_platform_driver(thunder_pem_driver);
--
2.50.1.windows.1
WARNING: multiple messages have this Message-ID (diff)
From: Hongyan Xu <getshell@seu.edu.cn>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>,
Daire McNamara <daire.mcnamara@microchip.com>,
Conor Dooley <conor.dooley@microchip.com>,
Robert Richter <rric@kernel.org>,
Zhou Wang <wangzhou1@hisilicon.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Krzysztof Wilczynski <kwilczynski@kernel.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org, Hongyan Xu <getshell@seu.edu.cn>
Subject: [PATCH 3/3] PCI: thunder-pem, hisi, thunder-ecam: Fix ECAM config window use-after-free
Date: Sun, 8 Nov 2026 18:56:39 +0800 [thread overview]
Message-ID: <20261108105640.875-4-getshell@seu.edu.cn> (raw)
In-Reply-To: <20261108105640.875-1-getshell@seu.edu.cn>
thunder-pem, hisi and thunder-ecam set .probe = pci_host_common_probe but
have no ->remove, so unbinding only runs devres_release_all():
gen_pci_unmap_cfg() -> pci_ecam_free() frees the ECAM config window while
the bus tree stays registered - only pci_remove_bus() unlinks a bus, and
only pci_host_common_remove() reaches it for a root bus. The next config
access in pci_ecam_map_bus() reads cfg->ops->bus_shift.
Trigger: DT overlay removal of the node that supplied or enabled it.
Fix: give each driver the same .remove = pci_host_common_remove that
pci-host-generic.c got in commit 01fcb7f777a9 ("PCI: Add support for
unbinding the generic PCI host controller"), so the unlink comes first.
Fixes: f12b76e56ada ("PCI: thunder: Add PCIe host driver for ThunderX processors")
Fixes: a2ec1996098c ("PCI: hisi: Add DT almost-ECAM support for Hip06/Hip07 host controllers")
Fixes: 7b6e7ba8e81a ("PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
---
drivers/pci/controller/dwc/pcie-hisi.c | 1 +
drivers/pci/controller/pci-thunder-ecam.c | 1 +
drivers/pci/controller/pci-thunder-pem.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-hisi.c b/drivers/pci/controller/dwc/pcie-hisi.c
index 3c17897e56fc..5ed58e5db797 100644
--- a/drivers/pci/controller/dwc/pcie-hisi.c
+++ b/drivers/pci/controller/dwc/pcie-hisi.c
@@ -169,6 +169,7 @@ static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
static struct platform_driver hisi_pcie_almost_ecam_driver = {
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
.driver = {
.name = "hisi-pcie-almost-ecam",
.of_match_table = hisi_pcie_almost_ecam_of_match,
diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c
index b5b4a958e6a2..4745f5d00b5a 100644
--- a/drivers/pci/controller/pci-thunder-ecam.c
+++ b/drivers/pci/controller/pci-thunder-ecam.c
@@ -358,6 +358,7 @@ static struct platform_driver thunder_ecam_driver = {
.suppress_bind_attrs = true,
},
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
};
builtin_platform_driver(thunder_ecam_driver);
diff --git a/drivers/pci/controller/pci-thunder-pem.c b/drivers/pci/controller/pci-thunder-pem.c
index 5fa037fb61dc..80cabbf263be 100644
--- a/drivers/pci/controller/pci-thunder-pem.c
+++ b/drivers/pci/controller/pci-thunder-pem.c
@@ -474,6 +474,7 @@ static struct platform_driver thunder_pem_driver = {
.suppress_bind_attrs = true,
},
.probe = pci_host_common_probe,
+ .remove = pci_host_common_remove,
};
builtin_platform_driver(thunder_pem_driver);
--
2.50.1.windows.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2026-11-08 10:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-08 10:56 [PATCH 0/3] PCI: Fix ECAM config window use-after-free in five drivers Hongyan Xu
2026-11-08 10:56 ` Hongyan Xu
2026-11-08 10:56 ` [PATCH 1/3] PCI: apple: Fix ECAM config window use-after-free Hongyan Xu
2026-11-08 10:56 ` Hongyan Xu
2026-11-08 11:14 ` sashiko-bot
2026-11-08 14:21 ` Marc Zyngier
2026-11-08 14:21 ` Marc Zyngier
2026-11-08 10:56 ` [PATCH 2/3] PCI: microchip: " Hongyan Xu
2026-11-08 10:56 ` Hongyan Xu
2026-11-08 11:06 ` sashiko-bot
2026-11-08 10:56 ` Hongyan Xu [this message]
2026-11-08 10:56 ` [PATCH 3/3] PCI: thunder-pem, hisi, thunder-ecam: " Hongyan Xu
2026-11-08 11:00 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261108105640.875-4-getshell@seu.edu.cn \
--to=getshell@seu.edu.cn \
--cc=bhelgaas@google.com \
--cc=conor.dooley@microchip.com \
--cc=daire.mcnamara@microchip.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=maz@kernel.org \
--cc=robh@kernel.org \
--cc=rric@kernel.org \
--cc=stable@vger.kernel.org \
--cc=wangzhou1@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.