[PATCH v9 19/29] scsi-multipath: failover handling

[John Garry <john.garry@linux.dev>]

Failover occurs when the scsi_cmnd has failed and it is discovered that the
target scsi_device has transport down.

For a scsi command which suffers failover, requeue the master bio of each
bio attached to its request.

A bio which for which failover occurs is handled in
scsi_mpath_clone_end_io(). Failover is detected for blk_path_error()
occuring, same as how dm-mpath detects this.

Signed-off-by: John Garry <john.garry@linux.dev>
---
 drivers/scsi/scsi_multipath.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/scsi/scsi_multipath.c b/drivers/scsi/scsi_multipath.c
index 008bcafe73ad..4c965650c2bd 100644
--- a/drivers/scsi/scsi_multipath.c
+++ b/drivers/scsi/scsi_multipath.c
@@ -262,6 +262,20 @@ static void scsi_mpath_clone_end_io(struct bio *clone)
 {
 	struct bio *master_bio = clone->bi_private;
 
+	if (clone->bi_status && blk_path_error(clone->bi_status)) {
+		struct mpath_head *mpath_head =
+				master_bio->bi_bdev->bd_disk->private_data;
+		unsigned long flags;
+
+		spin_lock_irqsave(&mpath_head->requeue_lock, flags);
+		bio_list_add(&mpath_head->requeue_list, master_bio);
+		spin_unlock_irqrestore(&mpath_head->requeue_lock, flags);
+		bio_put(clone);
+
+		mpath_schedule_requeue_work(mpath_head);
+		return;
+	}
+
 	master_bio->bi_status = clone->bi_status;
 	bio_put(clone);
 	bio_endio(master_bio);
-- 
2.43.0