[RESEND PATCH 09/14] iio: adc: ad4691: poll own trigger from interrupt handler

[Jonathan Cameron <jic23@kernel.org>]

From: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

Keep a pointer to the CNV burst trigger in struct ad4691_state and poll
that from ad4691_irq() rather than indio_dev->trig. The interrupt is
only enabled for CNV burst mode with the buffer enabled, and the iio_info
used in that mode only accepts the driver's own trigger via
iio_validate_own_trigger(), so this is the same trigger.

This removes a dependency on the trig field of struct iio_dev, which
is to become private to the IIO core.

Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
---
 drivers/iio/adc/ad4691.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad4691.c b/drivers/iio/adc/ad4691.c
index f2f7c4c6424a..f63a68a009f8 100644
--- a/drivers/iio/adc/ad4691.c
+++ b/drivers/iio/adc/ad4691.c
@@ -441,6 +441,7 @@ struct ad4691_state {
 	struct spi_device *spi;
 
 	struct pwm_device *conv_trigger;
+	struct iio_trigger *trig;
 	int irq;
 	int vref_uV;
 	u32 cnv_period_ns;
@@ -1563,7 +1564,7 @@ static irqreturn_t ad4691_irq(int irq, void *private)
 	 * the IRQ.
 	 */
 	disable_irq_nosync(st->irq);
-	iio_trigger_poll(indio_dev->trig);
+	iio_trigger_poll(st->trig);
 
 	return IRQ_HANDLED;
 }
@@ -1861,6 +1862,7 @@ static int ad4691_setup_triggered_buffer(struct iio_dev *indio_dev,
 	if (!trig)
 		return -ENOMEM;
 
+	st->trig = trig;
 	trig->ops = &ad4691_trigger_ops;
 	iio_trigger_set_drvdata(trig, st);
 
-- 
2.56.0