All of lore.kernel.org
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: broonie@kernel.org, lee@kernel.org
Cc: lgirdwood@gmail.com, linux-sound@vger.kernel.org,
	linux-kernel@vger.kernel.org, mfd@lists.linux.dev,
	patches@opensource.cirrus.com
Subject: [PATCH 2/2] ASoC: cs42l43: Update load detect procedure for cs42l43b
Date: Wed, 11 Nov 2026 17:10:32 +0000	[thread overview]
Message-ID: <20261111171032.1491717-3-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20261111171032.1491717-1-ckeepax@opensource.cirrus.com>

The newer variants requires a slightly different process for the load
detection. It is no longer necessary to apply different tuning for 3 vs
4-pole headsets, but a new field does require updated for CTIA vs OMTP
headsets. Update the driver to follow the correct process for this
new version of the chip.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cs42l43-jack.c | 101 +++++++++++++++++++++-----------
 1 file changed, 67 insertions(+), 34 deletions(-)

diff --git a/sound/soc/codecs/cs42l43-jack.c b/sound/soc/codecs/cs42l43-jack.c
index a2555dd9229e3..b3f89c712ed93 100644
--- a/sound/soc/codecs/cs42l43-jack.c
+++ b/sound/soc/codecs/cs42l43-jack.c
@@ -324,6 +324,11 @@ irqreturn_t cs42l43_bias_detect_clamp(int irq, void *data)
 #define CS42L43_JACK_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | \
 			      SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5)
 
+#define CS42L43_TYPE_CTIA 0x0
+#define CS42L43_TYPE_OMTP 0x1
+#define CS42L43_TYPE_3POLE 0x2
+#define CS42L43_TYPE_OPEN 0x3
+
 static inline bool cs42l43_jack_present(struct cs42l43_codec *priv)
 {
 	struct cs42l43 *cs42l43 = priv->core;
@@ -502,9 +507,11 @@ static const struct reg_sequence cs42l43_4pole_patch[] = {
 	{ 0x4000,	0x00000000 },
 };
 
-static void cs42l43_start_load_detect(struct cs42l43_codec *priv, bool mic)
+static void cs42l43_start_load_detect(struct cs42l43_codec *priv, int type)
 {
 	struct cs42l43 *cs42l43 = priv->core;
+	const struct reg_sequence *patch;
+	int size;
 
 	dev_dbg(priv->dev, "Start load detect\n");
 
@@ -526,14 +533,36 @@ static void cs42l43_start_load_detect(struct cs42l43_codec *priv, bool mic)
 			dev_err(priv->dev, "Load detect HP power down timed out\n");
 	}
 
-	if (mic)
-		regmap_multi_reg_write_bypassed(cs42l43->regmap,
-						cs42l43_4pole_patch,
-						ARRAY_SIZE(cs42l43_4pole_patch));
-	else
-		regmap_multi_reg_write_bypassed(cs42l43->regmap,
-						cs42l43_3pole_patch,
-						ARRAY_SIZE(cs42l43_3pole_patch));
+	switch (cs42l43->variant_id) {
+	case CS42L43_DEVID_VAL:
+		switch (type) {
+		case CS42L43_TYPE_3POLE:
+		case CS42L43_TYPE_OPEN:
+			patch = cs42l43_3pole_patch;
+			size = ARRAY_SIZE(cs42l43_3pole_patch);
+			break;
+		default:
+			patch = cs42l43_4pole_patch;
+			size = ARRAY_SIZE(cs42l43_4pole_patch);
+			break;
+		}
+		break;
+	default:
+		patch = cs42l43_4pole_patch;
+		size = ARRAY_SIZE(cs42l43_4pole_patch);
+
+		switch (type) {
+		case CS42L43_TYPE_OMTP:
+			regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x89);
+			break;
+		default:
+			regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x98);
+			break;
+		}
+		break;
+	}
+
+	regmap_multi_reg_write_bypassed(cs42l43->regmap, patch, size);
 
 	regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN3,
 			   CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK, 0);
@@ -586,6 +615,14 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)
 			   CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK,
 			   priv->adc_ena);
 
+	switch (cs42l43->variant_id) {
+	case CS42L43_DEVID_VAL:
+		break;
+	default:
+		regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x0);
+		break;
+	}
+
 	if (priv->hp_ena && !priv->hp_ilimited) {
 		unsigned long time_left;
 
@@ -605,7 +642,7 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)
 	snd_soc_dapm_mutex_unlock(snd_soc_component_to_dapm(priv->component));
 }
 
-static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
+static int cs42l43_run_load_detect(struct cs42l43_codec *priv, int type)
 {
 	struct cs42l43 *cs42l43 = priv->core;
 	unsigned int val = 0;
@@ -613,7 +650,7 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
 
 	reinit_completion(&priv->load_detect);
 
-	cs42l43_start_load_detect(priv, mic);
+	cs42l43_start_load_detect(priv, type);
 	time_left = wait_for_completion_timeout(&priv->load_detect,
 						msecs_to_jiffies(CS42L43_LOAD_TIMEOUT_MS));
 	cs42l43_stop_load_detect(priv);
@@ -629,23 +666,25 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
 	if (!cs42l43_jack_present(priv))
 		return -ENODEV;
 
-	if (mic) {
+	switch (type) {
+	case CS42L43_TYPE_3POLE:
+	case CS42L43_TYPE_OPEN:
+		switch (val & CS42L43_AMP3_RES_DET_MASK) {
+		case 0x0: // < 22 Ohm impedance
+		case 0x1: // < 150 Ohm impedance
+		case 0x2: // < 1000 Ohm impedance
+			return CS42L43_JACK_HEADPHONE;
+		case 0x3: // > 1000 Ohm impedance
+			return CS42L43_JACK_LINEOUT;
+		default:
+			return -EINVAL;
+		}
+	default:
 		cs42l43_start_hs_bias(priv, false);
 		cs42l43_start_button_detect(priv);
 
 		return CS42L43_JACK_HEADSET;
 	}
-
-	switch (val & CS42L43_AMP3_RES_DET_MASK) {
-	case 0x0: // < 22 Ohm impedance
-	case 0x1: // < 150 Ohm impedance
-	case 0x2: // < 1000 Ohm impedance
-		return CS42L43_JACK_HEADPHONE;
-	case 0x3: // > 1000 Ohm impedance
-		return CS42L43_JACK_LINEOUT;
-	default:
-		return -EINVAL;
-	}
 }
 
 static int cs42l43_run_type_detect(struct cs42l43_codec *priv)
@@ -686,18 +725,12 @@ static int cs42l43_run_type_detect(struct cs42l43_codec *priv)
 	if (!cs42l43_jack_present(priv))
 		return -ENODEV;
 
-	switch (type & CS42L43_HSDET_TYPE_STS_MASK) {
-	case 0x0: // CTIA
-	case 0x1: // OMTP
-	case 0x4:
-		return cs42l43_run_load_detect(priv, true);
-	case 0x2: // 3-pole
-		return cs42l43_run_load_detect(priv, false);
-	case 0x3: // Open-circuit
+	type &= CS42L43_HSDET_TYPE_STS_MASK;
+
+	if (type == CS42L43_TYPE_OPEN)
 		return CS42L43_JACK_EXTENSION;
-	default:
-		return -EINVAL;
-	}
+	else
+		return cs42l43_run_load_detect(priv, type);
 }
 
 void cs42l43_clear_jack(struct cs42l43_codec *priv)
-- 
2.47.3


  parent reply	other threads:[~2026-11-11 17:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-11 17:10 [PATCH 0/2] Update cs42l43b load detection proceedure Charles Keepax
2026-11-11 17:10 ` [PATCH 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b Charles Keepax
2026-11-11 17:36   ` sashiko-bot
2026-11-11 17:10 ` Charles Keepax [this message]
2026-11-11 17:47   ` [PATCH 2/2] ASoC: cs42l43: Update load detect procedure " sashiko-bot
2026-11-12 11:22     ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261111171032.1491717-3-ckeepax@opensource.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=mfd@lists.linux.dev \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.