All of lore.kernel.org
 help / color / mirror / Atom feed
From: Will Porter <mrwillporter@gmail.com>
To: Christian Ruppert <arc@gmx.li>
Cc: Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	Neil Andrews <neil@androos.io>
Subject: [RFC PATCH 2/6] ALSA: mixer_audient: Use the cache of usb_mixer_elem_info
Date: Wed, 11 Nov 2026 20:37:16 -0600	[thread overview]
Message-ID: <20261112023720.1503814-3-mrwillporter@gmail.com> (raw)
In-Reply-To: <20261112023720.1503814-1-mrwillporter@gmail.com>

A cached control keeps its values in an array that is allocated after
the element and reached through elem->private_data. Every struct
usb_mixer_elem_info already has fields for this: the cached bitmap and
the cache_val[] array.

Use bit i of elem->cached and elem->cache_val[i] for element channel i.
The bit means what the valid flag meant: a transfer confirmed the
value. A successful read or write records the value and sets its bit.
A failed transfer leaves the cached value and the bit unchanged. Remove
the cache struct, its accessor and the extra allocation.

The generic cache holds MAX_CHANNELS values, so refuse a control with
more hardware channels. No control in the tables has more than two.

The generic notify paths clear the cache of an element unless
get_cur_broken is set. A write-only control cannot read its value back
after that, so set get_cur_broken for the cached FORCE_SET controls.
The notify paths do not reach these elements today, because the
elements do not set their unit id.

No functional change for the controls in the tables.

Assisted-by: Claude:claude-fable-5-2
Assisted-by: Claude:claude-sonnet-5-5
Signed-off-by: Will Porter <mrwillporter@gmail.com>
---
 sound/usb/mixer_audient.c | 131 +++++++++++++++++---------------------
 1 file changed, 60 insertions(+), 71 deletions(-)

diff --git a/sound/usb/mixer_audient.c b/sound/usb/mixer_audient.c
index df1e25a55a7a9..35b562b3aac51 100644
--- a/sound/usb/mixer_audient.c
+++ b/sound/usb/mixer_audient.c
@@ -555,24 +555,13 @@ static inline u16 snd_audient_kctl_channels(struct snd_kcontrol *kctl)
 }
 
 /*
- * A cached value is valid once a transfer confirmed it: a read, or a write
- * that succeeded. A probe transfer that fails leaves it invalid. CACHE |
- * FORCE_SET without INIT_HW keeps the earlier behaviour: the init value is
- * assumed, without a transfer.
+ * A cached control keeps its values in the cache of struct
+ * usb_mixer_elem_info: bit i of elem->cached and elem->cache_val[i] for
+ * element channel i. The bit is set once a transfer confirmed the value: a
+ * read, or a write that succeeded. A probe transfer that fails leaves it
+ * clear. CACHE | FORCE_SET without INIT_HW keeps the earlier behaviour: the
+ * init value is assumed, without a transfer.
  */
-struct snd_audient_cache_entry {
-	u32 value;
-	bool valid;
-};
-
-/* Cache entry of element channel i, or NULL for an uncached control. */
-static inline struct snd_audient_cache_entry *
-snd_audient_cache_slot(struct usb_mixer_elem_info *elem, unsigned int i)
-{
-	struct snd_audient_cache_entry *const cache = elem->private_data;
-
-	return cache ? cache + i : NULL;
-}
 
 
 #define AUDIENT_REQTYPE_SET (USB_DIR_OUT | USB_TYPE_CLASS \
@@ -621,26 +610,28 @@ static inline int snd_audient_set_cur(struct usb_mixer_interface *mixer,
 }
 
 
-static int snd_audient_raw_get_one(struct usb_mixer_interface *const mixer,
+static int snd_audient_raw_get_one(struct usb_mixer_elem_info *const elem,
 			const struct snd_audient_ctrl_type *const ctype,
-			struct snd_audient_cache_entry *const slot,
-			const u8 cidx, u32 *const value)
+			const unsigned int ch, const u8 cidx,
+			u32 *const value)
 {
+	struct usb_mixer_interface *const mixer = elem->head.mixer;
+	const bool cache = ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE;
 	int ret;
 	__le32 buf = 0;
 	s32 val;
 
-	if (slot && slot->valid) {
-		*value = slot->value;
+	if (cache && test_bit(ch, elem->cached)) {
+		*value = elem->cache_val[ch];
 
 		return ctype->len;
 	}
 
 	/*
-	 * Cached FORCE_SET controls are treated as write-only: an invalid
-	 * cache entry does not trigger a GET.
+	 * Cached FORCE_SET controls are treated as write-only: a clear
+	 * cache bit does not trigger a GET.
 	 */
-	if (slot && (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_FORCE_SET))
+	if (cache && (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_FORCE_SET))
 		return -ENODATA;
 
 	ret = snd_audient_get_cur(mixer, ctype, cidx, &buf);
@@ -654,27 +645,27 @@ static int snd_audient_raw_get_one(struct usb_mixer_interface *const mixer,
 
 	*value = val;
 
-	if (slot) {
-		slot->value = val;
-		slot->valid = true;
+	if (cache) {
+		elem->cache_val[ch] = val;
+		set_bit(ch, elem->cached);
 	}
 
 	return ret;
 }
 
-static int snd_audient_raw_set_one(struct usb_mixer_interface *const mixer,
+static int snd_audient_raw_set_one(struct usb_mixer_elem_info *const elem,
 			const struct snd_audient_ctrl_type *const ctype,
-			struct snd_audient_cache_entry *const slot,
-			const u8 cidx, const u32 value,
-			bool force)
+			const unsigned int ch, const u8 cidx,
+			const u32 value, bool force)
 {
+	struct usb_mixer_interface *const mixer = elem->head.mixer;
 	int ret;
 	u32 val;
 
 	if (force) {
 		val = !value;		/* just make it different */
 	} else {
-		ret = snd_audient_raw_get_one(mixer, ctype, slot, cidx, &val);
+		ret = snd_audient_raw_get_one(elem, ctype, ch, cidx, &val);
 		if (ret == -ENODATA)	/* FORCE_SET and not cached yet */
 			val = !value;	/* just make it different */
 		else if (ret < 0)
@@ -690,9 +681,9 @@ static int snd_audient_raw_set_one(struct usb_mixer_interface *const mixer,
 		if (ret < 0)
 			return ret;
 
-		if (slot) {
-			slot->value = value;
-			slot->valid = true;
+		if (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE) {
+			elem->cache_val[ch] = value;
+			set_bit(ch, elem->cached);
 		}
 	}
 
@@ -724,9 +715,8 @@ static int snd_ctl_audient_boolean_get(struct snd_kcontrol *kctl,
 		u32 buf;
 		int ret;
 
-		ret = snd_audient_raw_get_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, &buf);
+		ret = snd_audient_raw_get_one(elem, ctype, i, base + i,
+					      &buf);
 		if (ret == -ENODATA)	/* unknown write-only value: off */
 			buf = ctype->min.integer;
 		else if (ret < 0)
@@ -767,9 +757,8 @@ static int snd_ctl_audient_boolean_set(struct snd_kcontrol *kctl,
 							  : ctype->min.integer;
 		int ret;
 
-		ret = snd_audient_raw_set_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, buf, false);
+		ret = snd_audient_raw_set_one(elem, ctype, i, base + i,
+					      buf, false);
 		if (ret < 0)
 			return ret;
 
@@ -839,9 +828,8 @@ static int snd_ctl_audient_integer_get(struct snd_kcontrol *kctl,
 		s32 val;
 		int ret;
 
-		ret = snd_audient_raw_get_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, &val);
+		ret = snd_audient_raw_get_one(elem, ctype, i, base + i,
+					      &val);
 		if (ret == -ENODATA)	/* unknown write-only value: minimum */
 			val = ctype->min.integer;
 		else if (ret < 0)
@@ -890,9 +878,8 @@ static int snd_ctl_audient_integer_set(struct snd_kcontrol *kctl,
 						   ctl_val->value.integer.value[i]);
 		int ret;
 
-		ret = snd_audient_raw_set_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, val, false);
+		ret = snd_audient_raw_set_one(elem, ctype, i, base + i,
+					      val, false);
 		if (ret < 0)
 			return ret;
 
@@ -940,9 +927,8 @@ static int snd_ctl_audient_enum_get(struct snd_kcontrol *kctl,
 		int item;
 		int ret;
 
-		ret = snd_audient_raw_get_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, &val);
+		ret = snd_audient_raw_get_one(elem, ctype, i, base + i,
+					      &val);
 		if (ret == -ENODATA)	/* unknown write-only value: init */
 			val = ctype->init;
 		else if (ret < 0)
@@ -990,9 +976,8 @@ static int snd_ctl_audient_enum_set(struct snd_kcontrol *kctl,
 		const unsigned int item = ctl_val->value.enumerated.item[i];
 		int ret;
 
-		ret = snd_audient_raw_set_one(mixer, ctype,
-					      snd_audient_cache_slot(elem, i),
-					      base + i, e->values[item], false);
+		ret = snd_audient_raw_set_one(elem, ctype, i, base + i,
+					      e->values[item], false);
 		if (ret < 0)
 			return ret;
 
@@ -1072,24 +1057,28 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
 		return -EINVAL;
 	}
 
-	elem = kzalloc(sizeof(*elem)
-		       + ((ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE)
-			  ? (sizeof(struct snd_audient_cache_entry)
-			     * ctrl->hwchannels)
-			  : 0),
-		       GFP_KERNEL);
+	if (ctrl->hwchannels > MAX_CHANNELS)
+		return -EINVAL;
+
+	elem = kzalloc_obj(*elem);
 	if (!elem)
 		return -ENOMEM;
 
 	elem->head.mixer = mixer;
 	elem->channels = ctrl->channels;
 
-	if (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE)
-		elem->private_data = elem + 1;
+	/*
+	 * The generic notify paths clear the cache of an element unless
+	 * get_cur_broken is set. A write-only control cannot read its value
+	 * back after that.
+	 */
+	if ((ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE) &&
+	    (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_FORCE_SET))
+		elem->get_cur_broken = 1;
 
 	/*
 	 * A failed probe transfer must not fail the card: warn and keep the
-	 * control. Its cache entry stays invalid, so a readable control reads
+	 * control. Its cache bit stays clear, so a readable control reads
 	 * the device again on its next get, and a write-only control shows an
 	 * unknown value until a put succeeds.
 	 */
@@ -1097,8 +1086,7 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
 		int i;
 
 		for (i = 0; i < ctrl->hwchannels; i++) {
-			ret = snd_audient_raw_set_one(mixer, ctype,
-						      snd_audient_cache_slot(elem, i),
+			ret = snd_audient_raw_set_one(elem, ctype, i,
 						      ctrl->val_offs + i,
 						      ctype->init, true);
 			if (ret < 0)
@@ -1106,20 +1094,21 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
 					       "%s: cannot set channel %d (%d)\n",
 					       ctrl->name, i, ret);
 		}
-	} else if (elem->private_data) {
-		struct snd_audient_cache_entry *const cache = elem->private_data;
+	} else if (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_CACHE) {
 		int i;
 
 		for (i = 0; i < ctrl->hwchannels; i++) {
+			u32 val;
+
 			if (ctype->flags & SND_AUDIENT_CTYPE_FLAGS_FORCE_SET) {
-				cache[i].value = ctype->init;
-				cache[i].valid = true;
+				elem->cache_val[i] = ctype->init;
+				set_bit(i, elem->cached);
 				continue;
 			}
 
-			ret = snd_audient_raw_get_one(mixer, ctype, cache + i,
+			ret = snd_audient_raw_get_one(elem, ctype, i,
 						      ctrl->val_offs + i,
-						      &cache[i].value);
+						      &val);
 			if (ret < 0)
 				usb_audio_warn(mixer->chip,
 					       "%s: cannot read channel %d (%d)\n",
-- 
2.47.3


  parent reply	other threads:[~2026-11-12  2:37 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19 23:01 [PATCH 0/5] ALSA: usb-audio: Audient iD14 MkI vendor controls Will Porter
2026-10-19 23:01 ` [PATCH 1/5] ALSA: usb-audio: Give the Audient iD14 MkI its own mixer map Will Porter
2026-10-19 23:01 ` [PATCH 2/5] ALSA: usb-audio: Add Audient iD14 MkI monitor and routing controls Will Porter
2026-10-19 23:01 ` [PATCH 3/5] ALSA: usb-audio: Add Audient iD14 MkI mixer matrix Will Porter
2026-10-19 23:01 ` [PATCH 4/5] ALSA: usb-audio: Add Audient iD14 MkI write-only controls Will Porter
2026-10-19 23:01 ` [PATCH 5/5] ALSA: usb-audio: Replace the Audient iD14 MkI FU 12 control Will Porter
2026-10-20 13:10 ` [PATCH 0/5] ALSA: usb-audio: Audient iD14 MkI vendor controls Takashi Iwai
2026-10-26 18:36 ` Christian Ruppert
2026-10-26 21:44   ` Will Porter
2026-10-27  6:35     ` Takashi Iwai
2026-10-27 23:21     ` Christian Ruppert
2026-10-28  2:36       ` Will Porter
2026-11-01  0:00         ` [RFC PATCH 00/11] " Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 01/11] ALSA: rename mixer_evo to mixer_audient Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 02/11] ALSA: mixer_audient: explicitly define full control names Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 03/11] ALSA: mixer_audient: clarify USB control message definition Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 04/11] ALSA: mixer_audient: Add length check to USB transfer Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 05/11] ALSA: mixer_audient: make USB control transfer size configurable Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 06/11] ALSA: mixer_audient: Allow arbitrary boolean control values Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 07/11] ALSA: mixer_audient: Add integer range checks Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 08/11] ALSA: mixer_audient: Add control initialization at probe Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 09/11] ALSA: mixer_audient: Add readback-free parameter set Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 10/11] ALSA: mixer_audient: add control value caching Christian Ruppert
2026-11-01  0:00           ` [RFC PATCH 11/11] ALSA: mixer_audient: Create matrix programmatically Christian Ruppert
2026-11-01 17:35           ` [RFC PATCH 00/11] Re: ALSA: usb-audio: Audient iD14 MkI vendor controls Will Porter
2026-11-02  0:32             ` [RFC V2 PATCH 00/11] Re: ALSA: usb-audio: Audient iD14 MkI vendor Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 01/11] ALSA: rename mixer_evo to mixer_audient Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 02/11] ALSA: mixer_audient: explicitly define full control names Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 03/11] ALSA: mixer_audient: clarify USB control message definition Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 04/11] ALSA: mixer_audient: Add length check to USB transfer Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 05/11] ALSA: mixer_audient: make USB control transfer size configurable Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 06/11] ALSA: mixer_audient: Allow arbitrary boolean control values Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 07/11] ALSA: mixer_audient: Add integer range checks Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 08/11] ALSA: mixer_audient: Add control initialization at probe Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 09/11] ALSA: mixer_audient: Add readback-free parameter set Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 10/11] ALSA: mixer_audient: add control value caching Christian Ruppert
2026-11-02  0:32               ` [RFC V2 PATCH 11/11] ALSA: mixer_audient: Create matrix programmatically Christian Ruppert
2026-11-03  2:45               ` [RFC V2 PATCH 00/11] Re: ALSA: usb-audio: Audient iD14 MkI vendor Will Porter
2026-11-03 23:01                 ` Christian Ruppert
2026-11-06 16:31                   ` [RFC PATCH 00/16] ALSA: usb-audio: Audient driver and iD14 MkI support Will Porter
2026-11-06 16:31                     ` [RFC PATCH 01/16] ALSA: rename mixer_evo to mixer_audient Will Porter
2026-11-06 16:31                     ` [RFC PATCH 02/16] ALSA: mixer_audient: explicitly define full control names Will Porter
2026-11-06 16:31                     ` [RFC PATCH 03/16] ALSA: mixer_audient: clarify USB control message definition Will Porter
2026-11-06 16:31                     ` [RFC PATCH 04/16] ALSA: mixer_audient: Add length check to USB transfer Will Porter
2026-11-06 16:31                     ` [RFC PATCH 05/16] ALSA: mixer_audient: make USB control transfer size configurable Will Porter
2026-11-06 16:31                     ` [RFC PATCH 06/16] ALSA: mixer_audient: Allow arbitrary boolean control values Will Porter
2026-11-06 16:31                     ` [RFC PATCH 07/16] ALSA: mixer_audient: Add integer range checks Will Porter
2026-11-06 16:31                     ` [RFC PATCH 08/16] ALSA: mixer_audient: Add control initialization at probe Will Porter
2026-11-06 16:31                     ` [RFC PATCH 09/16] ALSA: mixer_audient: Add readback-free parameter set Will Porter
2026-11-06 16:31                     ` [RFC PATCH 10/16] ALSA: mixer_audient: add control value caching Will Porter
2026-11-06 16:31                     ` [RFC PATCH 11/16] ALSA: mixer_audient: Create matrix programmatically Will Porter
2026-11-06 16:31                     ` [RFC PATCH 12/16] ALSA: mixer_audient: Add a step size to integer controls Will Porter
2026-11-06 16:31                     ` [RFC PATCH 13/16] ALSA: mixer_audient: Add enumerated controls Will Porter
2026-11-06 16:53                       ` sashiko-bot
2026-11-06 20:29                         ` Will Porter
2026-11-09 22:30                           ` Christian Ruppert
2026-11-10  2:13                             ` Will Porter
2026-11-10 20:57                               ` Christian Ruppert
2026-11-12  2:37                                 ` [RFC PATCH 0/6] ALSA: mixer_audient: Cache rework and simplifications Will Porter
2026-11-12  2:37                                   ` [RFC PATCH 1/6] ALSA: mixer_audient: Fold in the review changes to patches 12-16 Will Porter
2026-11-12  2:37                                   ` Will Porter [this message]
2026-11-12  2:37                                   ` [RFC PATCH 3/6] ALSA: mixer_audient: Replace three flags with an access mode Will Porter
2026-11-12  2:37                                   ` [RFC PATCH 4/6] ALSA: mixer_audient: Fill the cache on first use Will Porter
2026-11-12  2:37                                   ` [RFC PATCH 5/6] ALSA: mixer_audient: Use one get and one put for all control types Will Porter
2026-11-12  2:37                                   ` [RFC PATCH 6/6] ALSA: mixer_audient: Use the same cache for the iD14 MkI FU 12 control Will Porter
2026-11-06 16:31                     ` [RFC PATCH 14/16] ALSA: usb-audio: Give the Audient iD14 MkI its own mixer map Will Porter
2026-11-06 16:31                     ` [RFC PATCH 15/16] ALSA: mixer_audient: Add Audient iD14 MkI controls Will Porter
2026-11-06 16:31                     ` [RFC PATCH 16/16] ALSA: mixer_audient: Replace the Audient iD14 MkI FU 12 control Will Porter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261112023720.1503814-3-mrwillporter@gmail.com \
    --to=mrwillporter@gmail.com \
    --cc=arc@gmx.li \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=neil@androos.io \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.