* [PATCH v2 2/3] dt-bindings: trivial-devices: Add National lm77 temperature sensor
2026-11-12 16:37 [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Lukasz Majewski
@ 2026-11-12 16:37 ` Lukasz Majewski
2026-11-13 10:11 ` Krzysztof Kozlowski
2026-11-12 16:37 ` [PATCH v2 3/3] arm64: dts: freescale: Add device tree definition for Cloos CBASE with i.MX8MM Lukasz Majewski
2026-11-13 10:11 ` [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Krzysztof Kozlowski
2 siblings, 1 reply; 8+ messages in thread
From: Lukasz Majewski @ 2026-11-12 16:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, Shawn Guo, Guenter Roeck,
Daniel Baluta, Jonathan Cameron, devicetree, imx,
linux-arm-kernel, linux-kernel, Lukasz Majewski
Add "national,lm77" as compatible for the National (now TI) LM77
digital I2C temperature sensor.
Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
---
Changes for v2:
- Place the compatible name in correct place
---
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index a8b2b9deade4..ae8f12c83043 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -375,6 +375,8 @@ properties:
- national,lm95235
# Temperature sensor
- national,lm95245
+ # Temperature sensor
+ - national,lm77
# Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
- national,lm80
# Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 3/3] arm64: dts: freescale: Add device tree definition for Cloos CBASE with i.MX8MM
2026-11-12 16:37 [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Lukasz Majewski
2026-11-12 16:37 ` [PATCH v2 2/3] dt-bindings: trivial-devices: Add National lm77 temperature sensor Lukasz Majewski
@ 2026-11-12 16:37 ` Lukasz Majewski
2026-11-12 17:36 ` Frank Li
2026-11-13 10:11 ` [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Krzysztof Kozlowski
2 siblings, 1 reply; 8+ messages in thread
From: Lukasz Majewski @ 2026-11-12 16:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, Shawn Guo, Guenter Roeck,
Daniel Baluta, Jonathan Cameron, devicetree, imx,
linux-arm-kernel, linux-kernel, Lukasz Majewski
This commit adds support for CBASE board, which incorporates the TQMa8MQML
module.
Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
---
Changes for v2:
- Fix the DTS according to the sashiko bot review (gemini/gemini-4-argon)
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/imx8mm-cbase.dts | 581 ++++++++++++++++++
2 files changed, 582 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-cbase.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a80cccf34eb5..c14e5ae2e4a0 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -121,6 +121,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8dxl-hummingboard-telematics.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-cbase.dtb
imx8mm-data-modul-edm-sbc-overlay-cm4-dtbs := \
imx8mm-data-modul-edm-sbc.dtb \
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-cbase.dts b/arch/arm64/boot/dts/freescale/imx8mm-cbase.dts
new file mode 100644
index 000000000000..029a637c9530
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-cbase.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ * Copyright 2026 Lukasz Majewski <lukma@nabladev.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+ model = "Cloos i.MX8MM CBASE board";
+ compatible = "cloos,imx8mm-cbase", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ clk_xtal40: clk-xtal40 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ led-0 {
+ label = "status1";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ label = "status2";
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "status3";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ label = "status4";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ label = "error";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-5 {
+ label = "run";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+
+ sfp_bot: sfp-bot {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp_bot>;
+ tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <1000>;
+ };
+
+ sfp_top: sfp-top {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp_top>;
+ tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <1000>;
+ };
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25000000 {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+ <&gpio1 1 GPIO_ACTIVE_LOW>,
+ <&gpio1 12 GPIO_ACTIVE_LOW>,
+ <&gpio1 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2518fd";
+ reg = <0>;
+ clocks = <&clk_xtal40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <4000000>;
+ };
+
+ can@1 {
+ compatible = "microchip,mcp2518fd";
+ reg = <1>;
+ clocks = <&clk_xtal40>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <4000000>;
+ };
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ fsl,magic-packet;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ managed_switch: switch@0 {
+ compatible = "marvell,mv88e6190";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_switch_interrupt>;
+ pinctrl-names = "default";
+ reg = <0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ switch0phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ switch0phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ switch0phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ switch0phy6: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ switch0phy7: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ switch0phy8: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ethernet = <&fec1>;
+ phy-mode = "rgmii-id";
+ reg = <0>;
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
+ port@1 {
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ phy-mode = "internal";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ phy-mode = "internal";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ phy-mode = "internal";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ phy-mode = "internal";
+ reg = <4>;
+ };
+
+ port@5 {
+ label = "lan5";
+ phy-handle = <&switch0phy5>;
+ phy-mode = "internal";
+ reg = <5>;
+ };
+
+ port@6 {
+ label = "lan6";
+ phy-handle = <&switch0phy6>;
+ phy-mode = "internal";
+ reg = <6>;
+ };
+
+ port@7 {
+ label = "lan7";
+ phy-handle = <&switch0phy7>;
+ phy-mode = "internal";
+ reg = <7>;
+ };
+
+ port@8 {
+ label = "lan8";
+ phy-handle = <&switch0phy8>;
+ phy-mode = "internal";
+ reg = <8>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "lan-sfp1";
+ phy-mode = "sgmii";
+ sfp = <&sfp_top>;
+ managed = "in-band-status";
+ };
+
+ port@a {
+ reg = <10>;
+ label = "lan-sfp2";
+ phy-mode = "sgmii";
+ sfp = <&sfp_bot>;
+ managed = "in-band-status";
+ };
+ };
+ };
+ };
+};
+
+&flexspi {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ onewire@18 {
+ compatible = "maxim,ds2484";
+ reg = <0x18>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "national,lm77";
+ reg = <0x49>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9543";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_sfp_top: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c_sfp_bot: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+
+ sfp_gpio: gpio@38 {
+ compatible = "nxp,pca9554";
+ reg = <0x38>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "SFP_TXFI_T", "SFP_TXDIS_T",
+ "SFP_MODPRES_T", "SFP_LOS_T",
+ "SFP_TXFI_L", "SFP_TXDIS_L",
+ "SFP_MODPRES_L", "SFP_LOS_L";
+ };
+};
+
+®_usdhc2_vqmmc {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphynop1 {
+ power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+ power-domains = <&pgc_otg2>;
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x19
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000006>,
+ <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000006>,
+ <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000006>,
+ <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000006>;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x10
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x19
+ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x19
+ MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x19
+ MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x19
+ MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x19
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x119
+ >;
+ };
+
+ pinctrl_switch_interrupt: switchinterruptgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+};
+
+/* SPI-NOR memory is not mounted on the used SoM */
+/delete-node/ &flash0;
--
2.39.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board
2026-11-12 16:37 [PATCH v2 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Lukasz Majewski
2026-11-12 16:37 ` [PATCH v2 2/3] dt-bindings: trivial-devices: Add National lm77 temperature sensor Lukasz Majewski
2026-11-12 16:37 ` [PATCH v2 3/3] arm64: dts: freescale: Add device tree definition for Cloos CBASE with i.MX8MM Lukasz Majewski
@ 2026-11-13 10:11 ` Krzysztof Kozlowski
2 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2026-11-13 10:11 UTC (permalink / raw)
To: Lukasz Majewski
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Shawn Guo,
Guenter Roeck, Daniel Baluta, Jonathan Cameron, devicetree, imx,
linux-arm-kernel, linux-kernel
On Thu, Nov 12, 2026 at 05:37:01PM +0100, Lukasz Majewski wrote:
> Add an entry for the i.MX8MM Cloos CBASE board.
>
> Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
> ---
> Changes for v2:
> - Place cbase in the correct order
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread