From: Venkat Yadlapati <venkat.yadlapati@yahoo.com>
To: Venkat Yadlapati <venkat.yadlapati@yahoo.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/2] Add support for the BOE ILI97680A AMOLED panel of the Motorola Signature
Date: Mon, 16 Nov 2026 13:10:11 +0530 [thread overview]
Message-ID: <20261116-vantage-panel-v2-0-e2ab48645e2c@yahoo.com> (raw)
The Motorola Signature uses a 1264x2780 BOE AMOLED panel driven by an
Ilitek ILI97680A. It is a MIPI DSI command mode panel with DSC 1.2
compression on four lanes. This series adds the devicetree binding and a
driver for it.
Two things are specific to this panel. The DSC picture parameter set is
written to a vendor register on command page 7 instead of being sent as a
standard PPS packet, and the brightness range is 0 to 16180 over DCS.
Tested on a Motorola Signature with the msm DRM driver: the panel lights
up at its native resolution and Phosh renders on it.
I used an LLM (Claude) to help write these patches and their commit
messages. I reviewed all of them and tested the result on the device.
---
Changes in v2:
- Give the panel its own compatible, "motorola,vantage-boe-ili97680a",
with "ilitek,ili97680a" as fallback: the mode, DSC settings and
initialization sequence belong to this BOE panel, not to every
ILI97680A panel. BOE's part number is not known, so the name follows
the "<device>-<glass vendor>-<controller>" style of the Xiaomi and
Lenovo NT36523 panels.
- Driver: match the panel compatible.
- Link to v1: https://patch.msgid.link/20261116-vantage-panel-v1-0-30b95bd49216@yahoo.com
---
Venkat Yadlapati (2):
dt-bindings: display: panel: Add Ilitek ILI97680A
drm/panel: Add Ilitek ILI97680A DSC command mode panel driver
.../bindings/display/panel/ilitek,ili97680a.yaml | 75 ++++
MAINTAINERS | 6 +
drivers/gpu/drm/panel/Kconfig | 16 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili97680a.c | 494 +++++++++++++++++++++
5 files changed, 592 insertions(+)
---
base-commit: 39e407b553ec15d4a233b651531ad431ed7542be
change-id: 20261116-vantage-panel-9b6254aa0a42
Best regards,
--
Venkat Yadlapati <venkat.yadlapati@yahoo.com>
WARNING: multiple messages have this Message-ID (diff)
From: Venkat Yadlapati via B4 Relay <devnull+venkat.yadlapati.yahoo.com@kernel.org>
To: Venkat Yadlapati <venkat.yadlapati@yahoo.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/2] Add support for the BOE ILI97680A AMOLED panel of the Motorola Signature
Date: Mon, 16 Nov 2026 13:10:11 +0530 [thread overview]
Message-ID: <20261116-vantage-panel-v2-0-e2ab48645e2c@yahoo.com> (raw)
The Motorola Signature uses a 1264x2780 BOE AMOLED panel driven by an
Ilitek ILI97680A. It is a MIPI DSI command mode panel with DSC 1.2
compression on four lanes. This series adds the devicetree binding and a
driver for it.
Two things are specific to this panel. The DSC picture parameter set is
written to a vendor register on command page 7 instead of being sent as a
standard PPS packet, and the brightness range is 0 to 16180 over DCS.
Tested on a Motorola Signature with the msm DRM driver: the panel lights
up at its native resolution and Phosh renders on it.
I used an LLM (Claude) to help write these patches and their commit
messages. I reviewed all of them and tested the result on the device.
---
Changes in v2:
- Give the panel its own compatible, "motorola,vantage-boe-ili97680a",
with "ilitek,ili97680a" as fallback: the mode, DSC settings and
initialization sequence belong to this BOE panel, not to every
ILI97680A panel. BOE's part number is not known, so the name follows
the "<device>-<glass vendor>-<controller>" style of the Xiaomi and
Lenovo NT36523 panels.
- Driver: match the panel compatible.
- Link to v1: https://patch.msgid.link/20261116-vantage-panel-v1-0-30b95bd49216@yahoo.com
---
Venkat Yadlapati (2):
dt-bindings: display: panel: Add Ilitek ILI97680A
drm/panel: Add Ilitek ILI97680A DSC command mode panel driver
.../bindings/display/panel/ilitek,ili97680a.yaml | 75 ++++
MAINTAINERS | 6 +
drivers/gpu/drm/panel/Kconfig | 16 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili97680a.c | 494 +++++++++++++++++++++
5 files changed, 592 insertions(+)
---
base-commit: 39e407b553ec15d4a233b651531ad431ed7542be
change-id: 20261116-vantage-panel-9b6254aa0a42
Best regards,
--
Venkat Yadlapati <venkat.yadlapati@yahoo.com>
next reply other threads:[~2026-11-16 7:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:40 Venkat Yadlapati [this message]
2026-11-16 7:40 ` [PATCH v2 0/2] Add support for the BOE ILI97680A AMOLED panel of the Motorola Signature Venkat Yadlapati via B4 Relay
2026-11-16 7:40 ` [PATCH v2 1/2] dt-bindings: display: panel: Add Ilitek ILI97680A Venkat Yadlapati
2026-11-16 7:40 ` Venkat Yadlapati via B4 Relay
2026-11-16 7:40 ` [PATCH v2 2/2] drm/panel: Add Ilitek ILI97680A DSC command mode panel driver Venkat Yadlapati
2026-11-16 7:40 ` Venkat Yadlapati via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116-vantage-panel-v2-0-e2ab48645e2c@yahoo.com \
--to=venkat.yadlapati@yahoo.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.