* [PATCH v3 0/4] Spacemit K3 enable Linux boot
@ 2026-11-16 10:26 E Shattow
2026-11-16 10:26 ` [PATCH v3 1/4] riscv: dts: spacemit: k3: override reserved status of mimsic and maplic E Shattow
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: E Shattow @ 2026-11-16 10:26 UTC (permalink / raw)
To: U-Boot Mailing List, Yixun Lan; +Cc: E Shattow
Adopt some fixes needed for Linux v7.2.10+ boot and enable
BOOTSTD_FULL together with minimal env addr variable defaults.
Build and test only with vendor BSP k3-br-v1.0.10 having reduced [1]
configuration to avoid a memory resource conflict. The vendor BSP SPL
in its default configuration attempts to load opensbi separately from
u-boot main app, and also attempts to load an embedded controller OS
image, neither of which is useful for mainline opensbi, mainline
Linux, and mainline U-Boot.
Changes since v2:
- Add patch 4/4 which adopts a proposed Linux series [2] to reduce the
initial memory configuration to 8GiB for CoM260 and Pico-ITX boards
1: https://lore.kernel.org/u-boot/20261029003327.1890979-1-e@freeshell.de/
2: https://lore.kernel.org/linux-riscv/20261115195112.32120-1-e@freeshell.de/
E Shattow (3):
riscv: dts: spacemit: k3: override reserved status of mimsic and
maplic
configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL
riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override
Junhui Liu (1):
riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC
arch/riscv/dts/k3-com260-ifx-u-boot.dtsi | 9 +++++++++
arch/riscv/dts/k3-pico-itx-u-boot.dtsi | 9 +++++++++
arch/riscv/dts/spacemit-k3-u-boot.dtsi | 4 ++++
configs/spacemit_k3_defconfig | 9 +--------
dts/upstream/src/riscv/spacemit/k3.dtsi | 2 --
include/configs/spacemit-k3.h | 6 ++++++
6 files changed, 29 insertions(+), 10 deletions(-)
create mode 100644 arch/riscv/dts/k3-com260-ifx-u-boot.dtsi
create mode 100644 arch/riscv/dts/k3-pico-itx-u-boot.dtsi
base-commit: 6487c50b8a40f2668ab98a892b9300ad5c181f38
--
2.53.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 1/4] riscv: dts: spacemit: k3: override reserved status of mimsic and maplic
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
@ 2026-11-16 10:26 ` E Shattow
2026-11-16 10:26 ` [PATCH v3 2/4] riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC E Shattow
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: E Shattow @ 2026-11-16 10:26 UTC (permalink / raw)
To: U-Boot Mailing List, Yixun Lan, Tim Ouyang, Leo Liang, Yao Zi,
Tom Rini
Cc: E Shattow, Troy Mitchell
Linux boot stalls when probing peripherals unless OpenSBI has the
enabled mimsic and maplic nodes. Override these nodes so Linux can boot.
Reported-by: Yixun Lan <dlan@kernel.org>
Acked-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: E Shattow <e@freeshell.de>
---
arch/riscv/dts/spacemit-k3-u-boot.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/riscv/dts/spacemit-k3-u-boot.dtsi b/arch/riscv/dts/spacemit-k3-u-boot.dtsi
index 352e85e7de87..278b36acc79f 100644
--- a/arch/riscv/dts/spacemit-k3-u-boot.dtsi
+++ b/arch/riscv/dts/spacemit-k3-u-boot.dtsi
@@ -3,4 +3,8 @@
* Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
*/
+/* Override reserved status of mimsic and maplic for OpenSBI */
+&mimsic { status = "okay"; };
+&maplic { status = "okay"; };
+
#include "spacemit-k3-binman.dtsi"
--
2.53.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 2/4] riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
2026-11-16 10:26 ` [PATCH v3 1/4] riscv: dts: spacemit: k3: override reserved status of mimsic and maplic E Shattow
@ 2026-11-16 10:26 ` E Shattow
2026-11-16 10:26 ` [PATCH v3 3/4] configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL E Shattow
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: E Shattow @ 2026-11-16 10:26 UTC (permalink / raw)
To: U-Boot Mailing List, Sumit Garg, Yixun Lan, Tim Ouyang, Leo Liang,
Yao Zi, Tom Rini, Guodong Xu
Cc: E Shattow, Junhui Liu
From: Junhui Liu <junhui.liu@pigmoral.tech>
The mimsic node describes the machine-level IMSIC, whose MMIO region is
0x10000 (64 KiB) for all 8 harts. However, the node also specifies
riscv,guest-index-bits = <6>, and per the AIA specification the
per-hart stride is 2^(guest-index-bits + 12) bytes when guest interrupt
files exist, i.e. 2^(6 + 12) = 256 KiB per hart and 2 MiB for all 8
harts. The described region cannot hold even a single hart's files, so
the node contradicts itself. OpenSBI enforces exactly this constraint in
imsic_data_check() and rejects the node with -EINVAL, preventing the
M-level IMSIC from initializing:
fdt_driver_init_by_offset: interrupt-controller@f1000000 (riscv,imsics) init failed: -3
init_coldboot: irqchip init failed (error -3)
Moreover, guest interrupt files exist to act as the supervisor-level
interrupt files of virtual harts; there is no machine-level counterpart.
riscv,num-guest-ids is equally meaningless for the machine-level IMSIC.
Drop both "riscv,guest-index-bits" and "riscv,num-guest-ids" properties
from the mimsic node so the node matches the actual hardware layout.
Fixes: 56f37e391a62 ("riscv: dts: spacemit: add initial support for K3 SoC")
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260729-k3-mimsic-fix-v1-1-368c0aec04b9@pigmoral.tech
Signed-off-by: Yixun Lan <dlan@kernel.org>
[ upstream commit: 01e2f07c44fc46180bdb10e70506f8acf44a53dd ]
(cherry picked from commit d44cd4bcf93bb5c99a4762ed5f11656b93f9e5cc)
---
dts/upstream/src/riscv/spacemit/k3.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/dts/upstream/src/riscv/spacemit/k3.dtsi b/dts/upstream/src/riscv/spacemit/k3.dtsi
index c3f2dce0969c..2d022e1364f1 100644
--- a/dts/upstream/src/riscv/spacemit/k3.dtsi
+++ b/dts/upstream/src/riscv/spacemit/k3.dtsi
@@ -1287,9 +1287,7 @@
<&cpu4_intc 11>, <&cpu5_intc 11>,
<&cpu6_intc 11>, <&cpu7_intc 11>;
msi-controller;
- riscv,guest-index-bits = <6>;
riscv,hart-index-bits = <4>;
- riscv,num-guest-ids = <511>;
riscv,num-ids = <511>;
status = "reserved";
};
--
2.53.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/4] configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
2026-11-16 10:26 ` [PATCH v3 1/4] riscv: dts: spacemit: k3: override reserved status of mimsic and maplic E Shattow
2026-11-16 10:26 ` [PATCH v3 2/4] riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC E Shattow
@ 2026-11-16 10:26 ` E Shattow
2026-11-16 10:26 ` [PATCH v3 4/4] riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override E Shattow
2026-11-18 7:32 ` [PATCH v3 0/4] Spacemit K3 enable Linux boot Yixun Lan
4 siblings, 0 replies; 6+ messages in thread
From: E Shattow @ 2026-11-16 10:26 UTC (permalink / raw)
To: U-Boot Mailing List, Yixun Lan, Tom Rini; +Cc: E Shattow
Define minimal env variables for boot in spacemit-k3.h with fdtfile
as the CFG_EXTRA_ENV_SETTINGS sentinel, and enable CONFIG_BOOTSTD_FULL
Signed-off-by: E Shattow <e@freeshell.de>
---
configs/spacemit_k3_defconfig | 9 +--------
include/configs/spacemit-k3.h | 6 ++++++
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig
index f49442951c8f..9bf582564d07 100644
--- a/configs/spacemit_k3_defconfig
+++ b/configs/spacemit_k3_defconfig
@@ -19,25 +19,18 @@ CONFIG_RISCV_SMODE=y
CONFIG_RISCV_ISA_ZICBOM=y
CONFIG_STACK_SIZE=0x100000
CONFIG_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOOTSTD_FULL=y
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=276
# CONFIG_BOARD_INIT is not set
-CONFIG_HUSH_PARSER=y
CONFIG_CMD_TLV_EEPROM=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MTD=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_DNS=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_WGET=y
-CONFIG_CMD_PXE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=d420c000.spi"
CONFIG_MTDPARTS_DEFAULT="d420c000.spi:128k(bootinfo),512k(fsbl),64k(env),1024k(esos),384k(opensbi),-(uboot)"
diff --git a/include/configs/spacemit-k3.h b/include/configs/spacemit-k3.h
index 9dd545e2a3b2..39d10059926e 100644
--- a/include/configs/spacemit-k3.h
+++ b/include/configs/spacemit-k3.h
@@ -6,6 +6,12 @@
#ifndef __SPACEMIT_K3_H
#define __SPACEMIT_K3_H
+#define CFG_EXTRA_ENV_SETTINGS \
+ "ramdisk_addr_r=0x130000000\0" \
+ "fdt_addr_r=0x138000000\0" \
+ "kernel_addr_r=0x140000000\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
+
#define CFG_SYS_NS16550_IER 0x40
#define RISCV_SMODE_TIMER_FREQ 24000000
--
2.53.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 4/4] riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
` (2 preceding siblings ...)
2026-11-16 10:26 ` [PATCH v3 3/4] configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL E Shattow
@ 2026-11-16 10:26 ` E Shattow
2026-11-18 7:32 ` [PATCH v3 0/4] Spacemit K3 enable Linux boot Yixun Lan
4 siblings, 0 replies; 6+ messages in thread
From: E Shattow @ 2026-11-16 10:26 UTC (permalink / raw)
To: U-Boot Mailing List, Tim Ouyang, Leo Liang, Yao Zi, Tom Rini,
Yixun Lan
Cc: E Shattow
Adopt [1] "SpacemiT K3 use 8gb memory size on CoM260 and Pico-ITX"
1: https://lore.kernel.org/linux-riscv/20261115195112.32120-1-e@freeshell.de/
Signed-off-by: E Shattow <e@freeshell.de>
---
arch/riscv/dts/k3-com260-ifx-u-boot.dtsi | 9 +++++++++
arch/riscv/dts/k3-pico-itx-u-boot.dtsi | 9 +++++++++
2 files changed, 18 insertions(+)
create mode 100644 arch/riscv/dts/k3-com260-ifx-u-boot.dtsi
create mode 100644 arch/riscv/dts/k3-pico-itx-u-boot.dtsi
diff --git a/arch/riscv/dts/k3-com260-ifx-u-boot.dtsi b/arch/riscv/dts/k3-com260-ifx-u-boot.dtsi
new file mode 100644
index 000000000000..cce42122a015
--- /dev/null
+++ b/arch/riscv/dts/k3-com260-ifx-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (c) 2026 E Shattow <e@freeshell.de>
+ */
+
+/* https://lore.kernel.org/linux-riscv/20261115195112.32120-2-e@freeshell.de/
+ * riscv: dts: spacemit: k3: use com260 8gb memory configuration
+ */
+/ { memory@100000000 { reg = <0x1 0x00000000 0x2 0x00000000>; }; };
diff --git a/arch/riscv/dts/k3-pico-itx-u-boot.dtsi b/arch/riscv/dts/k3-pico-itx-u-boot.dtsi
new file mode 100644
index 000000000000..8995d5e137eb
--- /dev/null
+++ b/arch/riscv/dts/k3-pico-itx-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (c) 2026 E Shattow <e@freeshell.de>
+ */
+
+/* https://lore.kernel.org/linux-riscv/20261115195112.32120-3-e@freeshell.de/
+ * riscv: dts: spacemit: k3: use pico-itx 8gb memory configuration
+ */
+/ { memory@100000000 { reg = <0x1 0x00000000 0x2 0x00000000>; }; };
--
2.53.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/4] Spacemit K3 enable Linux boot
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
` (3 preceding siblings ...)
2026-11-16 10:26 ` [PATCH v3 4/4] riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override E Shattow
@ 2026-11-18 7:32 ` Yixun Lan
4 siblings, 0 replies; 6+ messages in thread
From: Yixun Lan @ 2026-11-18 7:32 UTC (permalink / raw)
To: E Shattow; +Cc: U-Boot Mailing List
On 02:26 Mon 16 Nov , E Shattow wrote:
> Adopt some fixes needed for Linux v7.2.10+ boot and enable
> BOOTSTD_FULL together with minimal env addr variable defaults.
>
> Build and test only with vendor BSP k3-br-v1.0.10 having reduced [1]
> configuration to avoid a memory resource conflict. The vendor BSP SPL
> in its default configuration attempts to load opensbi separately from
> u-boot main app, and also attempts to load an embedded controller OS
> image, neither of which is useful for mainline opensbi, mainline
> Linux, and mainline U-Boot.
>
> Changes since v2:
> - Add patch 4/4 which adopts a proposed Linux series [2] to reduce the
> initial memory configuration to 8GiB for CoM260 and Pico-ITX boards
>
> 1: https://lore.kernel.org/u-boot/20261029003327.1890979-1-e@freeshell.de/
> 2: https://lore.kernel.org/linux-riscv/20261115195112.32120-1-e@freeshell.de/
>
> E Shattow (3):
> riscv: dts: spacemit: k3: override reserved status of mimsic and
> maplic
> configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL
> riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override
>
> Junhui Liu (1):
> riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC
>
> arch/riscv/dts/k3-com260-ifx-u-boot.dtsi | 9 +++++++++
> arch/riscv/dts/k3-pico-itx-u-boot.dtsi | 9 +++++++++
> arch/riscv/dts/spacemit-k3-u-boot.dtsi | 4 ++++
> configs/spacemit_k3_defconfig | 9 +--------
> dts/upstream/src/riscv/spacemit/k3.dtsi | 2 --
> include/configs/spacemit-k3.h | 6 ++++++
> 6 files changed, 29 insertions(+), 10 deletions(-)
> create mode 100644 arch/riscv/dts/k3-com260-ifx-u-boot.dtsi
> create mode 100644 arch/riscv/dts/k3-pico-itx-u-boot.dtsi
>
For the series,
Reviewed-by: Yixun Lan <dlan@kernel.org>
--
Yixun Lan (dlan)
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2026-11-18 7:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 10:26 [PATCH v3 0/4] Spacemit K3 enable Linux boot E Shattow
2026-11-16 10:26 ` [PATCH v3 1/4] riscv: dts: spacemit: k3: override reserved status of mimsic and maplic E Shattow
2026-11-16 10:26 ` [PATCH v3 2/4] riscv: dts: spacemit: k3: Drop guest properties from M-level IMSIC E Shattow
2026-11-16 10:26 ` [PATCH v3 3/4] configs: spacemit: k3: enable CONFIG_BOOTSTD_FULL E Shattow
2026-11-16 10:26 ` [PATCH v3 4/4] riscv: dts: spacemit: k3: adopt com260/pico-itx 8gb memory override E Shattow
2026-11-18 7:32 ` [PATCH v3 0/4] Spacemit K3 enable Linux boot Yixun Lan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.