All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board
@ 2026-11-17  5:43 ` Sandie Cao
  0 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:43 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC 
regulator tree, add USB controller and USB phy, Enable SD card.

This series is rebased on next-20261116.

---
Changes in v5:
- [patch2]
  - Correct commit message.
- [patch3]
  - Remove Onboard SD Card comment.
  - Change non-removable to broken-cd.
- Link to v4: https://lore.kernel.org/all/20261109033154.361399-1-
sandie.cao@deepcomputing.io/

Changes in v4:
- [patch1]
  - Remove unused reg_aux_vcc3v3.
  - Rename p1@41 to pmic@41.
  - Add regulator-always-on for dldo4.
- [patch3]
  - Correct Onboard SD Card comment.
- Link to v3: https://lore.kernel.org/all/20261102060012.100623-1-
sandie.cao@deepcomputing.io/

Changes in v3:
- Remove useless gpio header.
- Add Onboard SD Card comment.
- Link to v2: https://lore.kernel.org/all/20261020081633.3673704-1-
sandie.cao@deepcomputing.io/

Changes in v2:
- Remove usb3b, usb3c node define in k3.dtsi, it's already uploaded by 
other patch.
- Add phys and phys-name define for usb3b, usb3c, usb3d in 
k3-deepcomputing-fml13v05.
- Remove cd-gpios, use non-removable for sdhci0. 
- Remove vmmc-supply for sdhci0.
- Link to v1: https://lore.kernel.org/all/20260922110231.3426011-1-
sandie.cao@deepcomputing.io/

---

Sandie Cao (3):
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator
    tree
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller
    and USB phy support
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card
    support

 .../spacemit/k3-deepcomputing-fml13v05.dts    | 215 ++++++++++++++++++
 1 file changed, 215 insertions(+)


base-commit: 749a4de370409464cf8501ec5b2451df45c84eb4
-- 
2.43.0

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board
@ 2026-11-17  5:43 ` Sandie Cao
  0 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:43 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC 
regulator tree, add USB controller and USB phy, Enable SD card.

This series is rebased on next-20261116.

---
Changes in v5:
- [patch2]
  - Correct commit message.
- [patch3]
  - Remove Onboard SD Card comment.
  - Change non-removable to broken-cd.
- Link to v4: https://lore.kernel.org/all/20261109033154.361399-1-
sandie.cao@deepcomputing.io/

Changes in v4:
- [patch1]
  - Remove unused reg_aux_vcc3v3.
  - Rename p1@41 to pmic@41.
  - Add regulator-always-on for dldo4.
- [patch3]
  - Correct Onboard SD Card comment.
- Link to v3: https://lore.kernel.org/all/20261102060012.100623-1-
sandie.cao@deepcomputing.io/

Changes in v3:
- Remove useless gpio header.
- Add Onboard SD Card comment.
- Link to v2: https://lore.kernel.org/all/20261020081633.3673704-1-
sandie.cao@deepcomputing.io/

Changes in v2:
- Remove usb3b, usb3c node define in k3.dtsi, it's already uploaded by 
other patch.
- Add phys and phys-name define for usb3b, usb3c, usb3d in 
k3-deepcomputing-fml13v05.
- Remove cd-gpios, use non-removable for sdhci0. 
- Remove vmmc-supply for sdhci0.
- Link to v1: https://lore.kernel.org/all/20260922110231.3426011-1-
sandie.cao@deepcomputing.io/

---

Sandie Cao (3):
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator
    tree
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller
    and USB phy support
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card
    support

 .../spacemit/k3-deepcomputing-fml13v05.dts    | 215 ++++++++++++++++++
 1 file changed, 215 insertions(+)


base-commit: 749a4de370409464cf8501ec5b2451df45c84eb4
-- 
2.43.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree
  2026-11-17  5:43 ` Sandie Cao
@ 2026-11-17  5:45   ` Sandie Cao
  -1 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:45 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add the P1 PMIC's regulator topology tree for DeepComputing FML13V05 board

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index b5d5112de358..e061233c15a3 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -22,6 +22,154 @@ memory@100000000 {
 		device_type = "memory";
 		reg = <0x1 0x00000000 0x4 0x00000000>;
 	};
+
+	reg_aux_vcc5v: regulator-aux-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AUX_VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+		vin1-supply = <&reg_aux_vcc5v>;
+		vin2-supply = <&reg_aux_vcc5v>;
+		vin3-supply = <&reg_aux_vcc5v>;
+		vin4-supply = <&reg_aux_vcc5v>;
+		vin5-supply = <&reg_aux_vcc5v>;
+		vin6-supply = <&reg_aux_vcc5v>;
+		aldoin-supply = <&reg_aux_vcc5v>;
+		dldoin1-supply = <&buck4>;
+		dldoin2-supply = <&buck4>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6: buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <500000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1: aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo3: aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4: aldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo1: dldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo2: dldo2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo3: dldo3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo4: dldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo5: dldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo6: dldo6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo7: dldo7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &uart0 {
-- 
2.43.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree
@ 2026-11-17  5:45   ` Sandie Cao
  0 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:45 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add the P1 PMIC's regulator topology tree for DeepComputing FML13V05 board

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index b5d5112de358..e061233c15a3 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -22,6 +22,154 @@ memory@100000000 {
 		device_type = "memory";
 		reg = <0x1 0x00000000 0x4 0x00000000>;
 	};
+
+	reg_aux_vcc5v: regulator-aux-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AUX_VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+		vin1-supply = <&reg_aux_vcc5v>;
+		vin2-supply = <&reg_aux_vcc5v>;
+		vin3-supply = <&reg_aux_vcc5v>;
+		vin4-supply = <&reg_aux_vcc5v>;
+		vin5-supply = <&reg_aux_vcc5v>;
+		vin6-supply = <&reg_aux_vcc5v>;
+		aldoin-supply = <&reg_aux_vcc5v>;
+		dldoin1-supply = <&buck4>;
+		dldoin2-supply = <&buck4>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6: buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <500000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1: aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo3: aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4: aldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo1: dldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo2: dldo2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo3: dldo3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo4: dldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo5: dldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo6: dldo6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo7: dldo7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &uart0 {
-- 
2.43.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support
  2026-11-17  5:43 ` Sandie Cao
@ 2026-11-17  5:45   ` Sandie Cao
  -1 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:45 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add a USB 2.0 hub under the USB 2.0 controller node, to which devices such
as the USB Bluetooth, USB fingerprint and USB camera are attached.

Add USB 3.0 device node (b, c, d).
     - Port b: PD 3.0 (65W Max), USB 3.2 Gen 1
     - Port c: USB 3.2 Gen 1
     - Port d: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index e061233c15a3..bcd533484a73 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -172,8 +172,58 @@ dldo7: dldo7 {
 	};
 };
 
+&combophy {
+	spacemit,apmu = <&syscon_apmu 0x17>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
 	status = "okay";
 };
+
+&usb2_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,608";
+		reg = <1>;
+	};
+};
+
+&usb2_phy {
+	status = "okay";
+};
+
+&usb3b_u2phy {
+	status = "okay";
+};
+
+&usb3b {
+	phys = <&usb3b_u2phy>, <&combophy 2 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3c_u2phy {
+	status = "okay";
+};
+
+&usb3c {
+	phys = <&usb3c_u2phy>, <&combophy 3 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3d_u2phy {
+	status = "okay";
+};
+
+&usb3d {
+	phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
-- 
2.43.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support
@ 2026-11-17  5:45   ` Sandie Cao
  0 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:45 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add a USB 2.0 hub under the USB 2.0 controller node, to which devices such
as the USB Bluetooth, USB fingerprint and USB camera are attached.

Add USB 3.0 device node (b, c, d).
     - Port b: PD 3.0 (65W Max), USB 3.2 Gen 1
     - Port c: USB 3.2 Gen 1
     - Port d: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index e061233c15a3..bcd533484a73 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -172,8 +172,58 @@ dldo7: dldo7 {
 	};
 };
 
+&combophy {
+	spacemit,apmu = <&syscon_apmu 0x17>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
 	status = "okay";
 };
+
+&usb2_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,608";
+		reg = <1>;
+	};
+};
+
+&usb2_phy {
+	status = "okay";
+};
+
+&usb3b_u2phy {
+	status = "okay";
+};
+
+&usb3b {
+	phys = <&usb3b_u2phy>, <&combophy 2 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3c_u2phy {
+	status = "okay";
+};
+
+&usb3c {
+	phys = <&usb3c_u2phy>, <&combophy 3 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3d_u2phy {
+	status = "okay";
+};
+
+&usb3d {
+	phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
-- 
2.43.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support
  2026-11-17  5:43 ` Sandie Cao
@ 2026-11-17  5:46   ` Sandie Cao
  -1 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:46 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add the device tree node SDHCI-0 controller for onboard Micro SD card slot.

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../dts/spacemit/k3-deepcomputing-fml13v05.dts  | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index bcd533484a73..a80d32fe6f7f 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -177,6 +177,23 @@ &combophy {
 	status = "okay";
 };
 
+&sdhci0 {
+	pinctrl-names = "default","uhs";
+	pinctrl-0 = <&mmc1_cfg>;
+	pinctrl-1 = <&mmc1_uhs_cfg>;
+	bus-width = <4>;
+	broken-cd;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	cap-sd-highspeed;
+	vqmmc-supply = <&aldo1>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
-- 
2.43.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support
@ 2026-11-17  5:46   ` Sandie Cao
  0 siblings, 0 replies; 10+ messages in thread
From: Sandie Cao @ 2026-11-17  5:46 UTC (permalink / raw)
  To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
	Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
  Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
	Sandie Cao

Add the device tree node SDHCI-0 controller for onboard Micro SD card slot.

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../dts/spacemit/k3-deepcomputing-fml13v05.dts  | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index bcd533484a73..a80d32fe6f7f 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -177,6 +177,23 @@ &combophy {
 	status = "okay";
 };
 
+&sdhci0 {
+	pinctrl-names = "default","uhs";
+	pinctrl-0 = <&mmc1_cfg>;
+	pinctrl-1 = <&mmc1_uhs_cfg>;
+	bus-width = <4>;
+	broken-cd;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	cap-sd-highspeed;
+	vqmmc-supply = <&aldo1>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
-- 
2.43.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board
  2026-11-17  5:43 ` Sandie Cao
@ 2026-11-18  6:34   ` Yixun Lan
  -1 siblings, 0 replies; 10+ messages in thread
From: Yixun Lan @ 2026-11-18  6:34 UTC (permalink / raw)
  To: Sandie Cao
  Cc: Troy Mitchell, Conor Dooley, Rob Herring, Krzysztof Kozlowski,
	Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
	devicetree, linux-riscv, spacemit, linux-kernel

On 13:43 Tue 17 Nov     , Sandie Cao wrote:
> This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC 
> regulator tree, add USB controller and USB phy, Enable SD card.
> 
> This series is rebased on next-20261116.
> 
For the series, with

Reviewed-by: Yixun Lan <dlan@kernel.org>

-- 
Yixun Lan (dlan)

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board
@ 2026-11-18  6:34   ` Yixun Lan
  0 siblings, 0 replies; 10+ messages in thread
From: Yixun Lan @ 2026-11-18  6:34 UTC (permalink / raw)
  To: Sandie Cao
  Cc: Troy Mitchell, Conor Dooley, Rob Herring, Krzysztof Kozlowski,
	Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
	devicetree, linux-riscv, spacemit, linux-kernel

On 13:43 Tue 17 Nov     , Sandie Cao wrote:
> This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC 
> regulator tree, add USB controller and USB phy, Enable SD card.
> 
> This series is rebased on next-20261116.
> 
For the series, with

Reviewed-by: Yixun Lan <dlan@kernel.org>

-- 
Yixun Lan (dlan)

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2026-11-18  6:34 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-17  5:43 [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Sandie Cao
2026-11-17  5:43 ` Sandie Cao
2026-11-17  5:45 ` [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree Sandie Cao
2026-11-17  5:45   ` Sandie Cao
2026-11-17  5:45 ` [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support Sandie Cao
2026-11-17  5:45   ` Sandie Cao
2026-11-17  5:46 ` [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support Sandie Cao
2026-11-17  5:46   ` Sandie Cao
2026-11-18  6:34 ` [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Yixun Lan
2026-11-18  6:34   ` Yixun Lan

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.