From: Arun Iyengar <aiyengar1990@gmail.com>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Jonas Karlman <jonas@kwiboo.se>,
Boris Brezillon <boris.brezillon@collabora.com>,
Hans Verkuil <hverkuil@kernel.org>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Arun Iyengar <aiyengar1990@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2 0/2] media: verisilicon: Fix VDPU2 decoder error handling
Date: Fri, 20 Nov 2026 02:49:13 +0000 [thread overview]
Message-ID: <20261120-vdpu2-errreset-v2-0-8f4ef55e6dee@gmail.com> (raw)
The VDPU2 decoder reports failed decodes as done, and its interrupt
handler can finish a job the decoder is still working on.
Tested on Orange Pi 5 (RK3588S), v7.3-based KASAN kernel: 72 H.264
fluster suite runs, 50 error-stream runs, VP8 61/61; no IOMMU faults or
timeouts. The decoder was still enabled after 72 buffer-empty
interrupts; a later interrupt ended each of those jobs.
With a TEST-only patch (not in this series), the IRQ_NONE path ran
200 times on real registers; bus error and timeout, simulated 5 times
each by injected status bits, were logged and ended their jobs at once.
VP8 stayed 61/61 bit-exact.
Build-tested on media next. MPEG-2, RK3399 and RK3568 untested.
Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
Changes in v2:
- Patch 2: no reset after an error; handle the interrupt like the G2
handler instead (Nicolas)
- Link to v1: https://patch.msgid.link/20261119-vdpu2-errreset-v1-0-f8fa403b6a3a@gmail.com
---
Arun Iyengar (2):
media: verisilicon: Don't report VDPU2 decoder errors as success
media: verisilicon: Handle VDPU2 decoder interrupts like the G2
drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
---
base-commit: aa0f4c41d4870a18e65772a1817af16427200371
change-id: 20261115-vdpu2-errreset-8688700393a3
Best regards,
--
Arun Iyengar <aiyengar1990@gmail.com>
WARNING: multiple messages have this Message-ID (diff)
From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Jonas Karlman <jonas@kwiboo.se>,
Boris Brezillon <boris.brezillon@collabora.com>,
Hans Verkuil <hverkuil@kernel.org>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Arun Iyengar <aiyengar1990@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2 0/2] media: verisilicon: Fix VDPU2 decoder error handling
Date: Fri, 20 Nov 2026 02:49:13 +0000 [thread overview]
Message-ID: <20261120-vdpu2-errreset-v2-0-8f4ef55e6dee@gmail.com> (raw)
The VDPU2 decoder reports failed decodes as done, and its interrupt
handler can finish a job the decoder is still working on.
Tested on Orange Pi 5 (RK3588S), v7.3-based KASAN kernel: 72 H.264
fluster suite runs, 50 error-stream runs, VP8 61/61; no IOMMU faults or
timeouts. The decoder was still enabled after 72 buffer-empty
interrupts; a later interrupt ended each of those jobs.
With a TEST-only patch (not in this series), the IRQ_NONE path ran
200 times on real registers; bus error and timeout, simulated 5 times
each by injected status bits, were logged and ended their jobs at once.
VP8 stayed 61/61 bit-exact.
Build-tested on media next. MPEG-2, RK3399 and RK3568 untested.
Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
Changes in v2:
- Patch 2: no reset after an error; handle the interrupt like the G2
handler instead (Nicolas)
- Link to v1: https://patch.msgid.link/20261119-vdpu2-errreset-v1-0-f8fa403b6a3a@gmail.com
---
Arun Iyengar (2):
media: verisilicon: Don't report VDPU2 decoder errors as success
media: verisilicon: Handle VDPU2 decoder interrupts like the G2
drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
---
base-commit: aa0f4c41d4870a18e65772a1817af16427200371
change-id: 20261115-vdpu2-errreset-8688700393a3
Best regards,
--
Arun Iyengar <aiyengar1990@gmail.com>
WARNING: multiple messages have this Message-ID (diff)
From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Jonas Karlman <jonas@kwiboo.se>,
Boris Brezillon <boris.brezillon@collabora.com>,
Hans Verkuil <hverkuil@kernel.org>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Arun Iyengar <aiyengar1990@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2 0/2] media: verisilicon: Fix VDPU2 decoder error handling
Date: Fri, 20 Nov 2026 02:49:13 +0000 [thread overview]
Message-ID: <20261120-vdpu2-errreset-v2-0-8f4ef55e6dee@gmail.com> (raw)
The VDPU2 decoder reports failed decodes as done, and its interrupt
handler can finish a job the decoder is still working on.
Tested on Orange Pi 5 (RK3588S), v7.3-based KASAN kernel: 72 H.264
fluster suite runs, 50 error-stream runs, VP8 61/61; no IOMMU faults or
timeouts. The decoder was still enabled after 72 buffer-empty
interrupts; a later interrupt ended each of those jobs.
With a TEST-only patch (not in this series), the IRQ_NONE path ran
200 times on real registers; bus error and timeout, simulated 5 times
each by injected status bits, were logged and ended their jobs at once.
VP8 stayed 61/61 bit-exact.
Build-tested on media next. MPEG-2, RK3399 and RK3568 untested.
Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
Changes in v2:
- Patch 2: no reset after an error; handle the interrupt like the G2
handler instead (Nicolas)
- Link to v1: https://patch.msgid.link/20261119-vdpu2-errreset-v1-0-f8fa403b6a3a@gmail.com
---
Arun Iyengar (2):
media: verisilicon: Don't report VDPU2 decoder errors as success
media: verisilicon: Handle VDPU2 decoder interrupts like the G2
drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
---
base-commit: aa0f4c41d4870a18e65772a1817af16427200371
change-id: 20261115-vdpu2-errreset-8688700393a3
Best regards,
--
Arun Iyengar <aiyengar1990@gmail.com>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next reply other threads:[~2026-11-20 2:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 2:49 Arun Iyengar [this message]
2026-11-20 2:49 ` [PATCH v2 0/2] media: verisilicon: Fix VDPU2 decoder error handling Arun Iyengar via B4 Relay
2026-11-20 2:49 ` Arun Iyengar via B4 Relay
2026-11-20 2:49 ` [PATCH v2 1/2] media: verisilicon: Don't report VDPU2 decoder errors as success Arun Iyengar
2026-11-20 2:49 ` Arun Iyengar via B4 Relay
2026-11-20 2:49 ` Arun Iyengar via B4 Relay
2026-11-20 2:49 ` [PATCH v2 2/2] media: verisilicon: Handle VDPU2 decoder interrupts like the G2 Arun Iyengar
2026-11-20 2:49 ` Arun Iyengar via B4 Relay
2026-11-20 2:49 ` Arun Iyengar via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-vdpu2-errreset-v2-0-8f4ef55e6dee@gmail.com \
--to=aiyengar1990@gmail.com \
--cc=benjamin.gaignard@collabora.com \
--cc=boris.brezillon@collabora.com \
--cc=heiko@sntech.de \
--cc=hverkuil@kernel.org \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.