* [PATCH i-g-t] tests/kms_plane_cursor: add native cursor test with multiple overlays
@ 2026-11-20 7:30 Yuling Li
2026-11-20 14:38 ` ✓ Xe.CI.BAT: success for " Patchwork
2026-11-20 14:48 ` ✓ i915.CI.BAT: " Patchwork
0 siblings, 2 replies; 3+ messages in thread
From: Yuling Li @ 2026-11-20 7:30 UTC (permalink / raw)
To: igt-dev; +Cc: vitaly.prosyak, Yuling Li
Exercise native cursor visibility while three overlay planes are
switched between quadrant positions.
This reproduces incorrect cursor suppression when a split overlay
is mistaken for a split partner that covers the lower pipe.
The issue exposed by this test was fixed in Linux kernel.
Signed-off-by: Yuling Li <Yuling.Li@amd.com>
---
tests/kms_plane_cursor.c | 233 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 228 insertions(+), 5 deletions(-)
diff --git a/tests/kms_plane_cursor.c b/tests/kms_plane_cursor.c
index 4b69f1a17..48e5a1c13 100644
--- a/tests/kms_plane_cursor.c
+++ b/tests/kms_plane_cursor.c
@@ -24,7 +24,7 @@
* TEST: kms plane cursor
* Category: Display
* Description: Tests cursor interactions with primary and overlay planes.
- * Driver requirement: i915, xe
+ * Driver requirement: i915, xe, amdgpu
* Mega feature: General Display Features
*/
@@ -37,6 +37,10 @@
* SUBTEST: primary
* Description: Tests atomic cursor positioning on primary plane
*
+ * SUBTEST: multi-overlay
+ * Description: Tests native cursor positioning with three overlays arranged in
+ * quadrants while switching their positions
+ *
* SUBTEST: viewport
* Description: Tests atomic cursor positioning on primary plane and overlay plane
* with buffer larger than viewport used for display
@@ -47,13 +51,14 @@
*
* Some assumptions made:
* - Cursor planes can be placed on top of overlay planes
- * - DRM index indicates z-ordering, higher index = higher z-order
+ * - Overlay z-order follows zpos, with plane ID used to break ties
*/
enum {
TEST_PRIMARY = 0,
TEST_OVERLAY = 1 << 0,
TEST_VIEWPORT = 1 << 1,
+ TEST_MPO = 1 << 2,
};
typedef struct {
@@ -73,6 +78,7 @@ typedef struct data {
igt_display_t display;
igt_plane_t *primary;
igt_plane_t *overlay;
+ igt_plane_t *overlays[3];
igt_plane_t *cursor;
igt_output_t *output;
igt_crtc_t *crtc;
@@ -81,6 +87,7 @@ typedef struct data {
igt_fb_t ref_fb;
igt_fb_t pfb;
igt_fb_t ofb;
+ igt_fb_t mpo_fbs[3];
igt_fb_t cfb;
int drm_fd;
rect_t rect;
@@ -88,6 +95,49 @@ typedef struct data {
uint64_t max_curh;
} data_t;
+enum quadrant {
+ TOP_LEFT,
+ TOP_RIGHT,
+ BOTTOM_LEFT,
+ BOTTOM_RIGHT,
+ QUADRANT_COUNT,
+};
+
+static const enum quadrant mpo_slots[3][3] = {
+ { TOP_RIGHT, BOTTOM_RIGHT, BOTTOM_LEFT },
+ { BOTTOM_RIGHT, BOTTOM_LEFT, TOP_RIGHT },
+ { BOTTOM_LEFT, TOP_RIGHT, BOTTOM_RIGHT },
+};
+
+static const double mpo_colors[3][3] = {
+ { 0.25, 0.25, 0.25 },
+ { 0.50, 0.50, 0.50 },
+ { 0.75, 0.75, 0.75 },
+};
+
+static int plane_zpos_cmp(const void *left, const void *right)
+{
+ igt_plane_t *plane_left = *(igt_plane_t * const *)left;
+ igt_plane_t *plane_right = *(igt_plane_t * const *)right;
+ uint64_t zpos_left = 0, zpos_right = 0;
+
+ if (igt_plane_has_prop(plane_left, IGT_PLANE_ZPOS) &&
+ igt_plane_has_prop(plane_right, IGT_PLANE_ZPOS)) {
+ zpos_left = igt_plane_get_prop(plane_left, IGT_PLANE_ZPOS);
+ zpos_right = igt_plane_get_prop(plane_right, IGT_PLANE_ZPOS);
+ }
+
+ if (zpos_left < zpos_right)
+ return -1;
+ if (zpos_left > zpos_right)
+ return 1;
+ if (plane_left->drm_plane->plane_id < plane_right->drm_plane->plane_id)
+ return -1;
+ if (plane_left->drm_plane->plane_id > plane_right->drm_plane->plane_id)
+ return 1;
+ return 0;
+}
+
/* Common test setup. */
static void test_init(data_t *data, igt_crtc_t *crtc, igt_output_t *output,
unsigned int flags)
@@ -99,9 +149,20 @@ static void test_init(data_t *data, igt_crtc_t *crtc, igt_output_t *output,
data->primary = igt_crtc_get_plane_type(data->crtc,
DRM_PLANE_TYPE_PRIMARY);
- if (flags & TEST_OVERLAY)
+ data->overlay = NULL;
+ memset(data->overlays, 0, sizeof(data->overlays));
+ if (flags & TEST_MPO) {
+ for (int i = 0; i < ARRAY_SIZE(data->overlays); i++)
+ data->overlays[i] =
+ igt_crtc_get_plane_type_index(data->crtc,
+ DRM_PLANE_TYPE_OVERLAY,
+ i);
+ qsort(data->overlays, ARRAY_SIZE(data->overlays),
+ sizeof(data->overlays[0]), plane_zpos_cmp);
+ } else if (flags & TEST_OVERLAY) {
data->overlay = igt_crtc_get_plane_type(data->crtc,
DRM_PLANE_TYPE_OVERLAY);
+ }
data->cursor = igt_crtc_get_plane_type(data->crtc,
DRM_PLANE_TYPE_CURSOR);
@@ -127,10 +188,40 @@ static void test_fini(data_t *data)
igt_plane_set_fb(data->primary, NULL);
if (data->overlay)
igt_plane_set_fb(data->overlay, NULL);
+ for (int i = 0; i < ARRAY_SIZE(data->overlays); i++)
+ if (data->overlays[i])
+ igt_plane_set_fb(data->overlays[i], NULL);
igt_plane_set_fb(data->cursor, NULL);
igt_display_commit2(&data->display, COMMIT_ATOMIC);
}
+static rect_t quadrant_rect(const data_t *data, enum quadrant quadrant)
+{
+ int split_x = (data->mode->hdisplay + 1) / 2;
+ int split_y = (data->mode->vdisplay + 1) / 2;
+ rect_t rect = {
+ .x = quadrant == TOP_RIGHT || quadrant == BOTTOM_RIGHT ?
+ split_x : 0,
+ .y = quadrant == BOTTOM_LEFT || quadrant == BOTTOM_RIGHT ?
+ split_y : 0,
+ };
+
+ rect.w = rect.x ? data->mode->hdisplay - split_x : split_x;
+ rect.h = rect.y ? data->mode->vdisplay - split_y : split_y;
+ return rect;
+}
+
+static pos_t quadrant_cursor_pos(const data_t *data, int size,
+ enum quadrant quadrant)
+{
+ rect_t rect = quadrant_rect(data, quadrant);
+
+ return (pos_t) {
+ .x = rect.x + (rect.w - size) / 2,
+ .y = rect.y + (rect.h - size) / 2,
+ };
+}
+
/*
* Draws white and gray (if overlay FB is given) on the primary FB.
* Draws a magenta square where the cursor should be over top both planes.
@@ -239,10 +330,117 @@ static void test_cursor_spots(data_t *data, int size, unsigned int flags)
}
}
+static void set_mpo_overlays(data_t *data, int phase)
+{
+ for (int i = 0; i < ARRAY_SIZE(data->overlays); i++) {
+ rect_t rect = quadrant_rect(data, mpo_slots[phase][i]);
+
+ igt_plane_set_fb(data->overlays[i], &data->mpo_fbs[i]);
+ igt_plane_set_position(data->overlays[i], rect.x, rect.y);
+ igt_plane_set_size(data->overlays[i], rect.w, rect.h);
+ igt_fb_set_position(&data->mpo_fbs[i], data->overlays[i], 0, 0);
+ igt_fb_set_size(&data->mpo_fbs[i], data->overlays[i],
+ rect.w, rect.h);
+ }
+}
+
+static void disable_mpo_planes(data_t *data)
+{
+ for (int i = 0; i < ARRAY_SIZE(data->overlays); i++)
+ igt_plane_set_fb(data->overlays[i], NULL);
+ igt_plane_set_fb(data->cursor, NULL);
+}
+
+static void draw_mpo_reference(data_t *data, int phase, pos_t cursor_pos,
+ int cursor_size)
+{
+ cairo_t *cr = igt_get_cairo_ctx(data->drm_fd, &data->ref_fb);
+
+ igt_paint_color(cr, 0, 0, data->ref_fb.width, data->ref_fb.height,
+ 1.0, 1.0, 1.0);
+
+ for (int i = 0; i < ARRAY_SIZE(data->overlays); i++) {
+ rect_t rect = quadrant_rect(data, mpo_slots[phase][i]);
+
+ igt_paint_color(cr, rect.x, rect.y, rect.w, rect.h,
+ mpo_colors[i][0], mpo_colors[i][1],
+ mpo_colors[i][2]);
+ }
+
+ igt_paint_color(cr, cursor_pos.x, cursor_pos.y,
+ cursor_size, cursor_size, 1.0, 0.0, 1.0);
+ igt_put_cairo_ctx(cr);
+}
+
+static void test_cursor_mpo(data_t *data, int size)
+{
+ igt_crc_t references[3][QUADRANT_COUNT];
+ igt_crc_t test_crc;
+ const enum quadrant positions[] = {
+ BOTTOM_RIGHT,
+ TOP_LEFT,
+ TOP_RIGHT,
+ BOTTOM_LEFT,
+ };
+
+ igt_pipe_crc_start(data->pipe_crc);
+
+ /*
+ * Capture every software-composited reference before enabling the
+ * overlays. This leaves the hardware pass free to switch overlay
+ * topology while the native cursor remains enabled.
+ */
+ for (int phase = 0; phase < ARRAY_SIZE(mpo_slots); phase++) {
+ for (int i = 0; i < ARRAY_SIZE(positions); i++) {
+ pos_t cursor_pos =
+ quadrant_cursor_pos(data, size, positions[i]);
+
+ draw_mpo_reference(data, phase, cursor_pos, size);
+ igt_plane_set_fb(data->primary, &data->ref_fb);
+ disable_mpo_planes(data);
+ igt_display_commit_atomic(&data->display, 0, NULL);
+ igt_pipe_crc_get_current(data->drm_fd, data->pipe_crc,
+ &references[phase][i]);
+ }
+ }
+
+ igt_plane_set_fb(data->primary, &data->pfb);
+
+ for (int phase = 0; phase < ARRAY_SIZE(mpo_slots); phase++) {
+ set_mpo_overlays(data, phase);
+
+ for (int i = 0; i < ARRAY_SIZE(positions); i++) {
+ pos_t cursor_pos =
+ quadrant_cursor_pos(data, size, positions[i]);
+
+ /*
+ * The first commit for each phase switches overlay
+ * positions with the cursor on the bottom-right pipe.
+ * Subsequent commits only move the cursor.
+ */
+ igt_plane_set_fb(data->cursor, &data->cfb);
+ igt_plane_set_position(data->cursor,
+ cursor_pos.x, cursor_pos.y);
+ igt_display_commit_atomic(&data->display, 0, NULL);
+
+ if (is_amdgpu_device(data->drm_fd))
+ igt_wait_for_vblank_count(data->crtc, 1);
+
+ igt_pipe_crc_get_current(data->drm_fd, data->pipe_crc,
+ &test_crc);
+ igt_assert_crc_equal(&references[phase][i], &test_crc);
+ }
+ }
+
+ igt_pipe_crc_stop(data->pipe_crc);
+}
+
static void test_cleanup(data_t *data)
{
igt_remove_fb(data->drm_fd, &data->cfb);
igt_remove_fb(data->drm_fd, &data->ofb);
+ for (int i = 0; i < ARRAY_SIZE(data->mpo_fbs); i++)
+ igt_remove_fb(data->drm_fd, &data->mpo_fbs[i]);
igt_remove_fb(data->drm_fd, &data->pfb);
igt_remove_fb(data->drm_fd, &data->ref_fb);
}
@@ -257,6 +455,9 @@ static void test_cursor(data_t *data, int size, unsigned int flags)
sw = data->mode->hdisplay;
sh = data->mode->vdisplay;
+ igt_skip_on((flags & TEST_MPO) &&
+ (size > sw / 2 || size > sh / 2));
+
test_cleanup(data);
igt_create_fb(data->drm_fd, sw, sh, DRM_FORMAT_XRGB8888,
@@ -265,7 +466,19 @@ static void test_cursor(data_t *data, int size, unsigned int flags)
igt_create_color_fb(data->drm_fd, sw, sh, DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR, 1.0, 1.0, 1.0, &data->pfb);
- if (flags & TEST_OVERLAY) {
+ if (flags & TEST_MPO) {
+ int width = (sw + 1) / 2;
+ int height = (sh + 1) / 2;
+
+ for (int i = 0; i < ARRAY_SIZE(data->mpo_fbs); i++)
+ igt_create_color_fb(data->drm_fd, width, height,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_MOD_LINEAR,
+ mpo_colors[i][0],
+ mpo_colors[i][1],
+ mpo_colors[i][2],
+ &data->mpo_fbs[i]);
+ } else if (flags & TEST_OVERLAY) {
int width = (flags & TEST_VIEWPORT) ? data->rect.w + pad : data->rect.w;
int height = (flags & TEST_VIEWPORT) ? data->rect.h + pad : data->rect.h;
@@ -281,7 +494,10 @@ static void test_cursor(data_t *data, int size, unsigned int flags)
data->crtc);
igt_display_commit2(&data->display, COMMIT_ATOMIC);
- test_cursor_spots(data, size, flags);
+ if (flags & TEST_MPO)
+ test_cursor_mpo(data, size);
+ else
+ test_cursor_spots(data, size, flags);
}
int igt_main()
@@ -304,6 +520,9 @@ int igt_main()
{ "viewport", TEST_PRIMARY | TEST_OVERLAY | TEST_VIEWPORT,
"Tests atomic cursor positioning on primary plane and overlay plane "
"with buffer larger than viewport used for display" },
+ { "multi-overlay", TEST_PRIMARY | TEST_MPO,
+ "Tests native cursor positioning while switching three overlay "
+ "planes between quadrant positions" },
};
igt_fixture() {
@@ -334,6 +553,10 @@ int igt_main()
DRM_PLANE_TYPE_OVERLAY))
continue;
+ if ((tests[i].flags & TEST_MPO) &&
+ igt_crtc_count_plane_type(crtc, DRM_PLANE_TYPE_OVERLAY) < 3)
+ continue;
+
igt_display_reset(display);
igt_output_set_crtc(output,
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* ✓ Xe.CI.BAT: success for tests/kms_plane_cursor: add native cursor test with multiple overlays
2026-11-20 7:30 [PATCH i-g-t] tests/kms_plane_cursor: add native cursor test with multiple overlays Yuling Li
@ 2026-11-20 14:38 ` Patchwork
2026-11-20 14:48 ` ✓ i915.CI.BAT: " Patchwork
1 sibling, 0 replies; 3+ messages in thread
From: Patchwork @ 2026-11-20 14:38 UTC (permalink / raw)
To: Yuling Li; +Cc: igt-dev
[-- Attachment #1: Type: text/plain, Size: 1004 bytes --]
== Series Details ==
Series: tests/kms_plane_cursor: add native cursor test with multiple overlays
URL : https://patchwork.freedesktop.org/series/179205/
State : success
== Summary ==
CI Bug Log - changes from XEIGT_9200_BAT -> XEIGTPW_16190_BAT
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Participating hosts (15 -> 15)
------------------------------
No changes in participating hosts
Changes
-------
No changes found
Build changes
-------------
* IGT: IGT_9200 -> IGTPW_16190
* Linux: xe-6193-5e1f7086abf6664123216020e4afb75a2512292e -> xe-6195-5273820504a824f0c81ed31f939599dd0da3fc69
IGTPW_16190: 16190
IGT_9200: 9200
xe-6193-5e1f7086abf6664123216020e4afb75a2512292e: 5e1f7086abf6664123216020e4afb75a2512292e
xe-6195-5273820504a824f0c81ed31f939599dd0da3fc69: 5273820504a824f0c81ed31f939599dd0da3fc69
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_16190/index.html
[-- Attachment #2: Type: text/html, Size: 1563 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* ✓ i915.CI.BAT: success for tests/kms_plane_cursor: add native cursor test with multiple overlays
2026-11-20 7:30 [PATCH i-g-t] tests/kms_plane_cursor: add native cursor test with multiple overlays Yuling Li
2026-11-20 14:38 ` ✓ Xe.CI.BAT: success for " Patchwork
@ 2026-11-20 14:48 ` Patchwork
1 sibling, 0 replies; 3+ messages in thread
From: Patchwork @ 2026-11-20 14:48 UTC (permalink / raw)
To: Yuling Li; +Cc: igt-dev
[-- Attachment #1: Type: text/plain, Size: 5523 bytes --]
== Series Details ==
Series: tests/kms_plane_cursor: add native cursor test with multiple overlays
URL : https://patchwork.freedesktop.org/series/179205/
State : success
== Summary ==
CI Bug Log - changes from IGT_9200 -> IGTPW_16190
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/index.html
Participating hosts (39 -> 39)
------------------------------
Additional (1): bat-adls-6
Missing (1): bat-dg2-13
Known issues
------------
Here are the changes found in IGTPW_16190 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_lmem_swapping@parallel-random-engines:
- bat-adls-6: NOTRUN -> [SKIP][1] ([i915#4613]) +3 other tests skip
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@gem_lmem_swapping@parallel-random-engines.html
* igt@gem_tiled_pread_basic@basic:
- bat-adls-6: NOTRUN -> [SKIP][2] ([i915#15656])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@gem_tiled_pread_basic@basic.html
* igt@i915_pm_rpm@module-reload:
- bat-adls-6: NOTRUN -> [FAIL][3] ([i915#17803])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@i915_pm_rpm@module-reload.html
* igt@intel_hwmon@hwmon-read:
- bat-adls-6: NOTRUN -> [SKIP][4] ([i915#7707]) +1 other test skip
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@intel_hwmon@hwmon-read.html
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- bat-adls-6: NOTRUN -> [SKIP][5] ([i915#4103]) +1 other test skip
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy.html
* igt@kms_dsc@dsc-basic:
- bat-adls-6: NOTRUN -> [SKIP][6] ([i915#16361])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_dsc@dsc-basic.html
* igt@kms_force_connector_basic@force-load-detect:
- bat-adls-6: NOTRUN -> [SKIP][7] ([i915#17452])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_force_connector_basic@force-load-detect.html
* igt@kms_pm_backlight@basic-brightness:
- bat-adls-6: NOTRUN -> [SKIP][8] ([i915#5354])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_pm_backlight@basic-brightness.html
* igt@kms_psr@psr-primary-mmap-gtt:
- bat-adls-6: NOTRUN -> [SKIP][9] ([i915#1072] / [i915#9732]) +3 other tests skip
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_psr@psr-primary-mmap-gtt.html
* igt@kms_setmode@basic-clone-single-crtc:
- bat-adls-6: NOTRUN -> [SKIP][10] ([i915#3555])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@kms_setmode@basic-clone-single-crtc.html
* igt@prime_vgem@basic-fence-read:
- bat-adls-6: NOTRUN -> [SKIP][11] ([i915#17448] / [i915#3291]) +2 other tests skip
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-adls-6/igt@prime_vgem@basic-fence-read.html
* igt@vgem_basic@unload:
- bat-rpls-4: [PASS][12] -> [DMESG-WARN][13] ([i915#13400])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_9200/bat-rpls-4/igt@vgem_basic@unload.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/bat-rpls-4/igt@vgem_basic@unload.html
#### Possible fixes ####
* igt@i915_pm_rpm@module-reload:
- fi-tgl-1115g4: [FAIL][14] ([i915#17751]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_9200/fi-tgl-1115g4/igt@i915_pm_rpm@module-reload.html
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/fi-tgl-1115g4/igt@i915_pm_rpm@module-reload.html
[i915#1072]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1072
[i915#13400]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13400
[i915#15656]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15656
[i915#16361]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16361
[i915#17448]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17448
[i915#17452]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17452
[i915#17751]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17751
[i915#17803]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/17803
[i915#3291]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3291
[i915#3555]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3555
[i915#4103]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4103
[i915#4613]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4613
[i915#5354]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5354
[i915#7707]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7707
[i915#9732]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9732
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_9200 -> IGTPW_16190
* Linux: CI_DRM_19571 -> CI_DRM_19572
CI-20190529: 20190529
CI_DRM_19571: 9bf864cd53c8e7651a038b9be01b2b0dfc67b420 @ git://anongit.freedesktop.org/gfx-ci/linux
CI_DRM_19572: 5273820504a824f0c81ed31f939599dd0da3fc69 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_16190: 16190
IGT_9200: 9200
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_16190/index.html
[-- Attachment #2: Type: text/html, Size: 6448 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-20 14:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 7:30 [PATCH i-g-t] tests/kms_plane_cursor: add native cursor test with multiple overlays Yuling Li
2026-11-20 14:38 ` ✓ Xe.CI.BAT: success for " Patchwork
2026-11-20 14:48 ` ✓ i915.CI.BAT: " Patchwork
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.