All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines
@ 2026-11-20  6:30 ` Arun Iyengar via B4 Relay
  0 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

Andre Przywara reviewed v1 and suggested labelling the flash node (patch
1) and setting spi-rx-bus-width in the dtsi shared with the Zero3 (patch 2).

spi-rx-bus-width = <2> needs the binding patch of [1] (acked, not applied
yet) to pass dtbs_check.
Without the driver patch of [1] the driver ignores the setting.

Tested on an Orange Pi Zero2, with [1]: 1-1-2 reads (opcode 0x3b),
two 2 MiB reads identical to an earlier dump.

[1] https://lore.kernel.org/r/20261116-spi-sun6i-h616-dual-read-v2-0-e0c66eb71e20@gmail.com

Developed with Claude (Anthropic), which wrote the patches and commit
messages. I reviewed them.

---
Changes in v3:
- Label renamed to spi_flash (Andre)
- Zero3 flash supply added (Andre): reg_dldo1, see the note in patch 1
- Zero2 &spi_flash moved after &pio (sorted)
- Dropped Suggested-by on patch 2, added Andre's tags
- Link to v2: https://patch.msgid.link/20261119-zero2-spi-nor-dual-read-v2-0-185c87065e39@gmail.com

Changes in v2:
- Label the flash node, no nested &spi0 override (Andre)
- spi-rx-bus-width moved to the shared dtsi, Zero3 included (Andre;
  he read 16 MB on a Zero3 in 1.8 s instead of 3.5 s)
- Dropped the driver dependency (Andre); the binding is still needed for dtbs_check
- Link to v1: https://patch.msgid.link/20261118-zero2-spi-nor-dual-read-v1-1-bcdcbf785be0@gmail.com

---
Arun Iyengar (2):
      arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label
      arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines

 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 3 ++-
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 6 ++----
 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
 3 files changed, 8 insertions(+), 5 deletions(-)
---
base-commit: 90e0d3fd460ec365617982b56bd7ea5179b36197
change-id: 20261115-zero2-spi-nor-dual-read-645a6de25e81
prerequisite-patch-id: 28b145097d0f859e5bd27bcc5028d0915f3ba4bd

Best regards,
--  
Arun Iyengar <aiyengar1990@gmail.com>


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 0/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines
@ 2026-11-20  6:30 ` Arun Iyengar via B4 Relay
  0 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar via B4 Relay @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

Andre Przywara reviewed v1 and suggested labelling the flash node (patch
1) and setting spi-rx-bus-width in the dtsi shared with the Zero3 (patch 2).

spi-rx-bus-width = <2> needs the binding patch of [1] (acked, not applied
yet) to pass dtbs_check.
Without the driver patch of [1] the driver ignores the setting.

Tested on an Orange Pi Zero2, with [1]: 1-1-2 reads (opcode 0x3b),
two 2 MiB reads identical to an earlier dump.

[1] https://lore.kernel.org/r/20261116-spi-sun6i-h616-dual-read-v2-0-e0c66eb71e20@gmail.com

Developed with Claude (Anthropic), which wrote the patches and commit
messages. I reviewed them.

---
Changes in v3:
- Label renamed to spi_flash (Andre)
- Zero3 flash supply added (Andre): reg_dldo1, see the note in patch 1
- Zero2 &spi_flash moved after &pio (sorted)
- Dropped Suggested-by on patch 2, added Andre's tags
- Link to v2: https://patch.msgid.link/20261119-zero2-spi-nor-dual-read-v2-0-185c87065e39@gmail.com

Changes in v2:
- Label the flash node, no nested &spi0 override (Andre)
- spi-rx-bus-width moved to the shared dtsi, Zero3 included (Andre;
  he read 16 MB on a Zero3 in 1.8 s instead of 3.5 s)
- Dropped the driver dependency (Andre); the binding is still needed for dtbs_check
- Link to v1: https://patch.msgid.link/20261118-zero2-spi-nor-dual-read-v1-1-bcdcbf785be0@gmail.com

---
Arun Iyengar (2):
      arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label
      arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines

 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 3 ++-
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 6 ++----
 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
 3 files changed, 8 insertions(+), 5 deletions(-)
---
base-commit: 90e0d3fd460ec365617982b56bd7ea5179b36197
change-id: 20261115-zero2-spi-nor-dual-read-645a6de25e81
prerequisite-patch-id: 28b145097d0f859e5bd27bcc5028d0915f3ba4bd

Best regards,
--  
Arun Iyengar <aiyengar1990@gmail.com>



^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 1/2] arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label
  2026-11-20  6:30 ` Arun Iyengar via B4 Relay
@ 2026-11-20  6:30   ` Arun Iyengar via B4 Relay
  -1 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

Label the flash node in the shared dtsi, so each board sets its supply
through the label. The Zero2 keeps reg_aldo1. On the Zero3 the flash VDD
is on the 3.3V rail from the AXP313A DLDO1 pin (schematic v1.2), so it
gets reg_dldo1.

Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
Andre: reg_dldo1 instead of reg_aldo1 on the Zero3. Schematic v1.2
sheet 4 labels the 3.3V net "ALDO1", but it comes from AXP313A pin 12
(DLDO1, VCC33-DLDO); pin 15 (ALDO1) is the 1.8V VCC18-ALDO. The flash
VDD (U61 pin 8, net DCDCE) is on that 3.3V net. Not tested, no Zero3
here.
---
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 6 ++----
 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 0d3e761f6466..cd1f67ad7c2b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -104,7 +104,7 @@ &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
 
-	flash@0 {
+	spi_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index 90c25e12e189..2f8a16d1c9aa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -148,8 +148,6 @@ &pio {
 	vcc-pi-supply = <&reg_aldo1>;
 };
 
-&spi0 {
-	flash@0 {
-		vcc-supply = <&reg_aldo1>;
-	};
+&spi_flash {
+	vcc-supply = <&reg_aldo1>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index c51d4d9120de..afa753dead30 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -103,3 +103,7 @@ &pio {
 	vcc-ph-supply = <&reg_dldo1>;
 	vcc-pi-supply = <&reg_dldo1>;
 };
+
+&spi_flash {
+	vcc-supply = <&reg_dldo1>;
+};

-- 
2.55.0


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 1/2] arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label
@ 2026-11-20  6:30   ` Arun Iyengar via B4 Relay
  0 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar via B4 Relay @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

From: Arun Iyengar <aiyengar1990@gmail.com>

Label the flash node in the shared dtsi, so each board sets its supply
through the label. The Zero2 keeps reg_aldo1. On the Zero3 the flash VDD
is on the 3.3V rail from the AXP313A DLDO1 pin (schematic v1.2), so it
gets reg_dldo1.

Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
Andre: reg_dldo1 instead of reg_aldo1 on the Zero3. Schematic v1.2
sheet 4 labels the 3.3V net "ALDO1", but it comes from AXP313A pin 12
(DLDO1, VCC33-DLDO); pin 15 (ALDO1) is the 1.8V VCC18-ALDO. The flash
VDD (U61 pin 8, net DCDCE) is on that 3.3V net. Not tested, no Zero3
here.
---
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 6 ++----
 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 0d3e761f6466..cd1f67ad7c2b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -104,7 +104,7 @@ &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
 
-	flash@0 {
+	spi_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index 90c25e12e189..2f8a16d1c9aa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -148,8 +148,6 @@ &pio {
 	vcc-pi-supply = <&reg_aldo1>;
 };
 
-&spi0 {
-	flash@0 {
-		vcc-supply = <&reg_aldo1>;
-	};
+&spi_flash {
+	vcc-supply = <&reg_aldo1>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index c51d4d9120de..afa753dead30 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -103,3 +103,7 @@ &pio {
 	vcc-ph-supply = <&reg_dldo1>;
 	vcc-pi-supply = <&reg_dldo1>;
 };
+
+&spi_flash {
+	vcc-supply = <&reg_dldo1>;
+};

-- 
2.55.0



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 2/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines
  2026-11-20  6:30 ` Arun Iyengar via B4 Relay
@ 2026-11-20  6:30   ` Arun Iyengar via B4 Relay
  -1 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

WP# and HOLD# are tied to VCC on the Zero2 (schematic v1.3), so read over
two lines. Andre Przywara pointed out that the Zero3 is the same.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index cd1f67ad7c2b..de05cbbd2cae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -110,6 +110,7 @@ spi_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 

-- 
2.55.0


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 2/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines
@ 2026-11-20  6:30   ` Arun Iyengar via B4 Relay
  0 siblings, 0 replies; 7+ messages in thread
From: Arun Iyengar via B4 Relay @ 2026-11-20  6:30 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
	Jernej Skrabec, Samuel Holland
  Cc: Andre Przywara, devicetree, linux-arm-kernel, linux-sunxi,
	linux-kernel, Arun Iyengar

From: Arun Iyengar <aiyengar1990@gmail.com>

WP# and HOLD# are tied to VCC on the Zero2 (schematic v1.3), so read over
two lines. Andre Przywara pointed out that the Zero3 is the same.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index cd1f67ad7c2b..de05cbbd2cae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -110,6 +110,7 @@ spi_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 

-- 
2.55.0



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 1/2] arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label
  2026-11-20  6:30   ` Arun Iyengar via B4 Relay
  (?)
@ 2026-11-20 17:10   ` Andre Przywara
  -1 siblings, 0 replies; 7+ messages in thread
From: Andre Przywara @ 2026-11-20 17:10 UTC (permalink / raw)
  To: Arun Iyengar via B4 Relay
  Cc: aiyengar1990, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, devicetree,
	linux-arm-kernel, linux-sunxi, linux-kernel

On Fri, 20 Nov 2026 06:30:08 +0000
Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
wrote:

Hi Arun,

> From: Arun Iyengar <aiyengar1990@gmail.com>
> 
> Label the flash node in the shared dtsi, so each board sets its supply
> through the label. The Zero2 keeps reg_aldo1. On the Zero3 the flash VDD
> is on the 3.3V rail from the AXP313A DLDO1 pin (schematic v1.2), so it
> gets reg_dldo1.
> 
> Suggested-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>

> ---
> Andre: reg_dldo1 instead of reg_aldo1 on the Zero3. Schematic v1.2
> sheet 4 labels the 3.3V net "ALDO1", but it comes from AXP313A pin 12
> (DLDO1, VCC33-DLDO); pin 15 (ALDO1) is the 1.8V VCC18-ALDO. The flash
> VDD (U61 pin 8, net DCDCE) is on that 3.3V net. Not tested, no Zero3
> here.

Ah yeah, indeed, the schematic is super confusing in this respect. The
flash chip uses DCDCE(!) as the supply label, which then goes on to
connect to some unused label "ALDO1", but also to VCC33-DLDO, which is
the actual PMIC connection. And the chip needs definitely more than
2.3V for its operation, according to its datasheet, so 3.3V is the right
voltage.

So my bad, and thanks for checking this thoroughly.

Cheers,
Andre

> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 2 +-
>  arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 6 ++----
>  arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 4 ++++
>  3 files changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
> index 0d3e761f6466..cd1f67ad7c2b 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
> @@ -104,7 +104,7 @@ &spi0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
>  
> -	flash@0 {
> +	spi_flash: flash@0 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		compatible = "jedec,spi-nor";
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> index 90c25e12e189..2f8a16d1c9aa 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> @@ -148,8 +148,6 @@ &pio {
>  	vcc-pi-supply = <&reg_aldo1>;
>  };
>  
> -&spi0 {
> -	flash@0 {
> -		vcc-supply = <&reg_aldo1>;
> -	};
> +&spi_flash {
> +	vcc-supply = <&reg_aldo1>;
>  };
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
> index c51d4d9120de..afa753dead30 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
> @@ -103,3 +103,7 @@ &pio {
>  	vcc-ph-supply = <&reg_dldo1>;
>  	vcc-pi-supply = <&reg_dldo1>;
>  };
> +
> +&spi_flash {
> +	vcc-supply = <&reg_dldo1>;
> +};
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2026-11-20 17:10 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20  6:30 [PATCH v3 0/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines Arun Iyengar
2026-11-20  6:30 ` Arun Iyengar via B4 Relay
2026-11-20  6:30 ` [PATCH v3 1/2] arm64: dts: allwinner: orangepi-zero2/zero3: Set the SPI NOR supply by label Arun Iyengar
2026-11-20  6:30   ` Arun Iyengar via B4 Relay
2026-11-20 17:10   ` Andre Przywara
2026-11-20  6:30 ` [PATCH v3 2/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines Arun Iyengar
2026-11-20  6:30   ` Arun Iyengar via B4 Relay

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.