Re: [PATCH v2 3/7] dts: arm64: rockchip: Add rk3576 pcie nodes

["Heiko Stübner" <heiko@sntech.de>]

Am Montag, 23. Dezember 2024, 11:49:23 CET schrieb Kever Yang:
> Hi Krzysztof,
> 
> On 2024/12/22 14:38, Krzysztof Kozlowski wrote:
> > On Fri, Dec 20, 2024 at 06:15:47PM +0800, Kever Yang wrote:
> >> rk3576 has two pcie controller, both are pcie2x1 used with
> >> naneng-combphy.
> >>
> >> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> >> ---
> > Please use subject prefixes matching the subsystem. You can get them for
> > example with 'git log --oneline -- DIRECTORY_OR_FILE' on the directory
> > your patch is touching. For bindings, the preferred subjects are
> > explained here:
> > https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters
> >
> Will update with arm64: dts: .
> >> Changes in v2:
> >> - Update clock and reset names and sequence to pass DTB check
> >>
> >>   arch/arm64/boot/dts/rockchip/rk3576.dtsi | 109 +++++++++++++++++++++++
> >>   1 file changed, 109 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> >> index a147879da501..df7dfe702221 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> >> @@ -1016,6 +1016,115 @@ qos_npu_m1ro: qos@27f22100 {
> >>   			reg = <0x0 0x27f22100 0x0 0x20>;
> >>   		};
> >>   
> >> +		pcie0: pcie@2a200000 {
> >> +			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
> >> +			bus-range = <0x0 0xf>;
> > Follow DTS coding style in properties order and everything around here.
> 
> I can do it for most of the properties, but is there any other rules 
> other than sort,
> 
> eg. compatible and reg in the beginning and status in the end?

correct, that is the preferred sorting :-) .


Heiko