All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Wed, 20 May 2020 23:20:27 +0530	[thread overview]
Message-ID: <2174d6b5ab066cf6fd080b5d3c27609f@codeaurora.org> (raw)
In-Reply-To: <1589946996-31264-1-git-send-email-pillair@codeaurora.org>

On 2020-05-20 09:26, Rakesh Pillai wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> Changes from v10:
> - Corrected the position of wifi node, as per address
> - Removed the wlan_fw_mem from reserved memory, since
>   its already added as reserved memory in board DT file.

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>

> ---
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts |  7 +++++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 22 ++++++++++++++++++++++
>  2 files changed, 29 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 4e9149d..38b102e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -389,6 +389,13 @@
>  	};
>  };
> 
> +&wifi {
> +	status = "okay";
> +	wifi-firmware {
> +		iommus = <&apps_smmu 0xc2 0x1>;
> +	};
> +};
> +
>  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> 
>  &qspi_clk {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6b12c60..da79f8f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2811,6 +2811,28 @@
> 
>  			#freq-domain-cells = <1>;
>  		};
> +
> +		wifi: wifi@18800000 {
> +			compatible = "qcom,wcn3990-wifi";
> +			reg = <0 0x18800000 0 0x800000>;
> +			reg-names = "membase";
> +			iommus = <&apps_smmu 0xc0 0x1>;
> +			interrupts =
> +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
> +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
> +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
> +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
> +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
> +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
> +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
> +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
> +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
> +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
> +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
> +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
> +			memory-region = <&wlan_mem>;
> +			status = "disabled";
> +		};
>  	};
> 
>  	thermal-zones {

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

WARNING: multiple messages have this Message-ID (diff)
From: Sibi Sankar <sibis@codeaurora.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: linux-kernel-owner@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Wed, 20 May 2020 23:20:27 +0530	[thread overview]
Message-ID: <2174d6b5ab066cf6fd080b5d3c27609f@codeaurora.org> (raw)
In-Reply-To: <1589946996-31264-1-git-send-email-pillair@codeaurora.org>

On 2020-05-20 09:26, Rakesh Pillai wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> Changes from v10:
> - Corrected the position of wifi node, as per address
> - Removed the wlan_fw_mem from reserved memory, since
>   its already added as reserved memory in board DT file.

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>

> ---
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts |  7 +++++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 22 ++++++++++++++++++++++
>  2 files changed, 29 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 4e9149d..38b102e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -389,6 +389,13 @@
>  	};
>  };
> 
> +&wifi {
> +	status = "okay";
> +	wifi-firmware {
> +		iommus = <&apps_smmu 0xc2 0x1>;
> +	};
> +};
> +
>  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> 
>  &qspi_clk {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6b12c60..da79f8f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2811,6 +2811,28 @@
> 
>  			#freq-domain-cells = <1>;
>  		};
> +
> +		wifi: wifi@18800000 {
> +			compatible = "qcom,wcn3990-wifi";
> +			reg = <0 0x18800000 0 0x800000>;
> +			reg-names = "membase";
> +			iommus = <&apps_smmu 0xc0 0x1>;
> +			interrupts =
> +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
> +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
> +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
> +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
> +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
> +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
> +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
> +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
> +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
> +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
> +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
> +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
> +			memory-region = <&wlan_mem>;
> +			status = "disabled";
> +		};
>  	};
> 
>  	thermal-zones {

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-20 17:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20  3:56 [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node Rakesh Pillai
2020-05-20  3:56 ` Rakesh Pillai
2020-05-20 17:50 ` Sibi Sankar [this message]
2020-05-20 17:50   ` Sibi Sankar
2020-05-21 16:19 ` Evan Green
2020-05-21 16:19   ` Evan Green
2020-06-17 22:45   ` Evan Green
2020-06-17 22:45     ` Evan Green
2020-06-20 14:44     ` Rakesh Pillai
2020-06-20 14:44       ` Rakesh Pillai
2020-06-21 19:06     ` Bjorn Andersson
2020-06-22  9:16       ` Rakesh Pillai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2174d6b5ab066cf6fd080b5d3c27609f@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pillair@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.