From: Sean Anderson <sean.anderson@linux.dev>
To: Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <mwalle@kernel.org>,
linux-mtd@lists.infradead.org
Cc: Richard Weinberger <richard@nod.at>,
linux-kernel@vger.kernel.org,
Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH] mtd: spi-nor: Enable locking for n25q00a
Date: Mon, 6 Oct 2025 18:38:27 -0400 [thread overview]
Message-ID: <21760ebf-99f8-4ea3-8841-e023e00ae574@linux.dev> (raw)
In-Reply-To: <20251006223409.3475001-1-sean.anderson@linux.dev>
On 10/6/25 18:34, Sean Anderson wrote:
> The datasheet for n25q00a shows that the status register has the same
> layout as for n25q00, so use the same flags to enable locking support.
> These flags should have been added back in commit 150ccc181588 ("mtd:
> spi-nor: Enable locking for n25q128a11"), but they were removed by the
Sorry, this should be commit f80ff13135cb ("mtd: spi-nor: micron-st: Enable locking for n25q00")
https://lore.kernel.org/all/20200421063313.32655-1-js07.lee@samsung.com/
> maintainer...
>
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
> ---
> Tested with a mt25qu01gbbb, which shares the same flash ID.
>
> drivers/mtd/spi-nor/micron-st.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
> index 187239ccd549..17c7d6322508 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -486,6 +486,8 @@ static const struct flash_info st_nor_parts[] = {
> .id = SNOR_ID(0x20, 0xbb, 0x21),
> .name = "n25q00a",
> .size = SZ_128M,
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
> + SPI_NOR_BP3_SR_BIT6,
> .no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
> .mfr_flags = USE_FSR,
> .fixups = &n25q00_fixups,
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@linux.dev>
To: Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <mwalle@kernel.org>,
linux-mtd@lists.infradead.org
Cc: Richard Weinberger <richard@nod.at>,
linux-kernel@vger.kernel.org,
Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH] mtd: spi-nor: Enable locking for n25q00a
Date: Mon, 6 Oct 2025 18:38:27 -0400 [thread overview]
Message-ID: <21760ebf-99f8-4ea3-8841-e023e00ae574@linux.dev> (raw)
In-Reply-To: <20251006223409.3475001-1-sean.anderson@linux.dev>
On 10/6/25 18:34, Sean Anderson wrote:
> The datasheet for n25q00a shows that the status register has the same
> layout as for n25q00, so use the same flags to enable locking support.
> These flags should have been added back in commit 150ccc181588 ("mtd:
> spi-nor: Enable locking for n25q128a11"), but they were removed by the
Sorry, this should be commit f80ff13135cb ("mtd: spi-nor: micron-st: Enable locking for n25q00")
https://lore.kernel.org/all/20200421063313.32655-1-js07.lee@samsung.com/
> maintainer...
>
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
> ---
> Tested with a mt25qu01gbbb, which shares the same flash ID.
>
> drivers/mtd/spi-nor/micron-st.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
> index 187239ccd549..17c7d6322508 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -486,6 +486,8 @@ static const struct flash_info st_nor_parts[] = {
> .id = SNOR_ID(0x20, 0xbb, 0x21),
> .name = "n25q00a",
> .size = SZ_128M,
> + .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
> + SPI_NOR_BP3_SR_BIT6,
> .no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
> .mfr_flags = USE_FSR,
> .fixups = &n25q00_fixups,
next prev parent reply other threads:[~2025-10-06 22:38 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-06 22:34 [PATCH] mtd: spi-nor: Enable locking for n25q00a Sean Anderson
2025-10-06 22:34 ` Sean Anderson
2025-10-06 22:38 ` Sean Anderson [this message]
2025-10-06 22:38 ` Sean Anderson
2025-10-08 5:05 ` Tudor Ambarus
2025-10-08 5:05 ` Tudor Ambarus
2025-10-08 12:38 ` Pratyush Yadav
2025-10-08 12:38 ` Pratyush Yadav
2025-10-07 13:15 ` Pratyush Yadav
2025-10-07 13:15 ` Pratyush Yadav
2025-10-07 14:20 ` Sean Anderson
2025-10-07 14:20 ` Sean Anderson
2025-10-08 12:30 ` Pratyush Yadav
2025-10-08 12:30 ` Pratyush Yadav
2025-10-08 12:40 ` Pratyush Yadav
2025-10-08 12:40 ` Pratyush Yadav
2025-10-09 22:27 ` Sean Anderson
2025-10-09 22:27 ` Sean Anderson
2025-10-09 23:07 ` Pratyush Yadav
2025-10-09 23:07 ` Pratyush Yadav
2025-10-10 15:45 ` Sean Anderson
2025-10-10 15:45 ` Sean Anderson
2025-10-13 7:30 ` Tudor Ambarus
2025-10-13 7:30 ` Tudor Ambarus
2025-10-14 18:25 ` Sean Anderson
2025-10-14 18:25 ` Sean Anderson
2025-11-10 7:08 ` Tudor Ambarus
2025-11-10 7:08 ` Tudor Ambarus
2025-11-10 10:16 ` Pratyush Yadav
2025-11-10 10:16 ` Pratyush Yadav
2025-11-10 16:36 ` Sean Anderson
2025-11-10 16:36 ` Sean Anderson
2025-11-11 6:07 ` Tudor Ambarus
2025-11-11 6:07 ` Tudor Ambarus
2025-11-12 13:10 ` Miquel Raynal
2025-11-12 13:10 ` Miquel Raynal
2025-11-12 13:20 ` Miquel Raynal
2025-11-12 13:20 ` Miquel Raynal
2025-11-12 13:34 ` Michael Walle
2025-11-12 13:34 ` Michael Walle
2025-11-13 15:32 ` Sean Anderson
2025-11-13 15:32 ` Sean Anderson
2025-11-14 17:55 ` Miquel Raynal
2025-11-14 17:55 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=21760ebf-99f8-4ea3-8841-e023e00ae574@linux.dev \
--to=sean.anderson@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.