From: Tomasz Figa <t.figa@samsung.com>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>,
mturquette@linaro.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Thomas Abraham <thomas.abraham@linaro.org>
Subject: Re: [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
Date: Tue, 10 Dec 2013 16:27:04 +0100 [thread overview]
Message-ID: <2199894.9J6a8matPx@amdc1227> (raw)
In-Reply-To: <201312101614.29781.heiko@sntech.de>
Hi Heiko,
On Tuesday 10 of December 2013 16:14:29 Heiko Stübner wrote:
> Next try, this time with less time between submissions.
>
> Tested on both non-dt and dt s3c2416.
>
> Changes since v3:
> - address comments from Tomasz Figa (binding documentation, etc)
> - prevent conflicts with unconverted s3c24xx socs
> Changes since v2
> - address comments from Tomasz Figa
> - use new pll registration mechanism
> - use fixed-rate clocks for xti etc
>
> Heiko Stuebner (7):
> clk: samsung: add pll_6552 variant for s3c2416
> clk: samsung: add plls used by the s3c2443
> dt-bindings: add binding for clock-controller of s3c2443 and following
> clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450
> ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs
> ARM: dt: add clock data for s3c2416
> ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
>
> .../bindings/clock/samsung,s3c2443-clock.txt | 56 ++
> arch/arm/boot/dts/s3c2416-smdk2416.dts | 13 +
> arch/arm/boot/dts/s3c2416.dtsi | 42 ++
> arch/arm/mach-s3c24xx/Kconfig | 18 +-
> arch/arm/mach-s3c24xx/Makefile | 5 +-
> arch/arm/mach-s3c24xx/clock-s3c2416.c | 171 -----
> arch/arm/mach-s3c24xx/clock-s3c2443.c | 212 ------
> arch/arm/mach-s3c24xx/common-s3c2443.c | 675 --------------------
> arch/arm/mach-s3c24xx/common.c | 18 +-
> arch/arm/mach-s3c24xx/common.h | 6 +
> arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 39 +-
> arch/arm/mach-s3c24xx/mach-smdk2416.c | 9 +-
> arch/arm/mach-s3c24xx/mach-smdk2443.c | 9 +-
> drivers/clk/samsung/Makefile | 1 +
> drivers/clk/samsung/clk-pll.c | 84 ++-
> drivers/clk/samsung/clk-pll.h | 3 +
> drivers/clk/samsung/clk-s3c2443.c | 417 ++++++++++++
> include/dt-bindings/clock/samsung,s3c2443-clock.h | 92 +++
> 18 files changed, 756 insertions(+), 1114 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
> delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
> create mode 100644 drivers/clk/samsung/clk-s3c2443.c
> create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h
I have already acked clock patches, so for remaining ones:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
WARNING: multiple messages have this Message-ID (diff)
From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
Date: Tue, 10 Dec 2013 16:27:04 +0100 [thread overview]
Message-ID: <2199894.9J6a8matPx@amdc1227> (raw)
In-Reply-To: <201312101614.29781.heiko@sntech.de>
Hi Heiko,
On Tuesday 10 of December 2013 16:14:29 Heiko St?bner wrote:
> Next try, this time with less time between submissions.
>
> Tested on both non-dt and dt s3c2416.
>
> Changes since v3:
> - address comments from Tomasz Figa (binding documentation, etc)
> - prevent conflicts with unconverted s3c24xx socs
> Changes since v2
> - address comments from Tomasz Figa
> - use new pll registration mechanism
> - use fixed-rate clocks for xti etc
>
> Heiko Stuebner (7):
> clk: samsung: add pll_6552 variant for s3c2416
> clk: samsung: add plls used by the s3c2443
> dt-bindings: add binding for clock-controller of s3c2443 and following
> clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450
> ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs
> ARM: dt: add clock data for s3c2416
> ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
>
> .../bindings/clock/samsung,s3c2443-clock.txt | 56 ++
> arch/arm/boot/dts/s3c2416-smdk2416.dts | 13 +
> arch/arm/boot/dts/s3c2416.dtsi | 42 ++
> arch/arm/mach-s3c24xx/Kconfig | 18 +-
> arch/arm/mach-s3c24xx/Makefile | 5 +-
> arch/arm/mach-s3c24xx/clock-s3c2416.c | 171 -----
> arch/arm/mach-s3c24xx/clock-s3c2443.c | 212 ------
> arch/arm/mach-s3c24xx/common-s3c2443.c | 675 --------------------
> arch/arm/mach-s3c24xx/common.c | 18 +-
> arch/arm/mach-s3c24xx/common.h | 6 +
> arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 39 +-
> arch/arm/mach-s3c24xx/mach-smdk2416.c | 9 +-
> arch/arm/mach-s3c24xx/mach-smdk2443.c | 9 +-
> drivers/clk/samsung/Makefile | 1 +
> drivers/clk/samsung/clk-pll.c | 84 ++-
> drivers/clk/samsung/clk-pll.h | 3 +
> drivers/clk/samsung/clk-s3c2443.c | 417 ++++++++++++
> include/dt-bindings/clock/samsung,s3c2443-clock.h | 92 +++
> 18 files changed, 756 insertions(+), 1114 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
> delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
> create mode 100644 drivers/clk/samsung/clk-s3c2443.c
> create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h
I have already acked clock patches, so for remaining ones:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
next prev parent reply other threads:[~2013-12-10 15:27 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 15:14 [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-10 15:14 ` Heiko Stübner
2013-12-10 15:15 ` [PATCH v4 1/7] clk: samsung: add pll_6552 variant for s3c2416 Heiko Stübner
2013-12-10 15:15 ` Heiko Stübner
2013-12-23 20:07 ` Mike Turquette
2013-12-23 20:07 ` Mike Turquette
2013-12-10 15:15 ` [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443 Heiko Stübner
2013-12-10 15:15 ` Heiko Stübner
2013-12-23 20:07 ` Mike Turquette
2013-12-23 20:07 ` Mike Turquette
2013-12-31 20:03 ` Heiko Stübner
2013-12-31 20:03 ` Heiko Stübner
2013-12-10 15:17 ` [PATCH v4 3/7] dt-bindings: add binding for clock-controller of s3c2443 and following Heiko Stübner
2013-12-10 15:17 ` Heiko Stübner
2013-12-10 15:17 ` [PATCH v4 4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450 Heiko Stübner
2013-12-10 15:17 ` Heiko Stübner
2013-12-10 15:18 ` [PATCH v4 5/7] ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs Heiko Stübner
2013-12-10 15:18 ` Heiko Stübner
2013-12-10 15:19 ` [PATCH v4 6/7] ARM: dt: add clock data for s3c2416 Heiko Stübner
2013-12-10 15:19 ` Heiko Stübner
2013-12-10 15:20 ` [PATCH v4 7/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-10 15:20 ` Heiko Stübner
2013-12-10 15:27 ` Tomasz Figa [this message]
2013-12-10 15:27 ` [PATCH v4 0/7] " Tomasz Figa
2013-12-23 13:11 ` Heiko Stübner
2013-12-23 13:11 ` Heiko Stübner
2013-12-24 1:37 ` Kukjin Kim
2013-12-24 1:37 ` Kukjin Kim
2013-12-24 10:20 ` Sachin Kamat
2013-12-24 10:20 ` Sachin Kamat
2014-01-10 8:30 ` kgene
2014-01-10 8:30 ` kgene at kernel.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2199894.9J6a8matPx@amdc1227 \
--to=t.figa@samsung.com \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.