All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Figa <tomasz.figa@gmail.com>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-pwm@vger.kernel.org,
	Kukjin Kim <kgene.kim@samsung.com>,
	thierry.reding@gmail.com, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>,
	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Thomas Abraham <thomas.abraham@linaro.org>
Subject: Re: [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
Date: Thu, 13 Jun 2013 22:38:57 +0200	[thread overview]
Message-ID: <2199978.JEbm7Iqajq@flatron> (raw)
In-Reply-To: <201306132224.33866.heiko@sntech.de>

On Thursday 13 of June 2013 22:24:33 Heiko Stübner wrote:
> Am Mittwoch, 5. Juni 2013, 23:18:19 schrieb Tomasz Figa:
> > This patch removes remaining inclusions of plat/regs-timer.h as a
> > preparation to remove the header.
> 
> hmm, the patch does a bit more than that, as it also removes the saving
> of the registers from the suspend calls, which is most likely handled
> by the driver now. But the description should possibly reflect that.

True, although I couldn't test suspend/resume with these patches, because 
it was already broken before, at least on s3c64xx and/or mini6410.

As an interesting side note, in case of s3c64xx and s5p64x0, existing code 
was not enough to make suspend/resume of the timer work, as it can be seen 
in case of s5pv210, which has it done almost correctly.

Almost, because as far as I know (and I can see in the manual) the TCNTO 
register is read only and there is a separate procedure for loading timer 
value manually.

Thanks for review.

Best regards,
Tomasz

> > Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
> > ---
> > 
> >  arch/arm/mach-s3c64xx/irq-pm.c  |  2 --
> >  arch/arm/mach-s5p64x0/pm.c      |  3 ---
> >  arch/arm/mach-s5pv210/pm.c      | 10 ----------
> >  arch/arm/plat-samsung/s5p-irq.c |  1 -
> >  4 files changed, 16 deletions(-)
> > 
> > diff --git a/arch/arm/mach-s3c64xx/irq-pm.c
> > b/arch/arm/mach-s3c64xx/irq-pm.c index 0c7e1d9..c3da1b6 100644
> > --- a/arch/arm/mach-s3c64xx/irq-pm.c
> > +++ b/arch/arm/mach-s3c64xx/irq-pm.c
> > @@ -22,7 +22,6 @@
> > 
> >  #include <mach/map.h>
> >  
> >  #include <plat/regs-serial.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <mach/regs-gpio.h>
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > @@ -43,7 +42,6 @@ static struct sleep_save irq_save[] = {
> > 
> >  	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
> >  	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
> >  	SAVE_ITEM(S3C64XX_EINT0MASK),
> > 
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > 
> >  };
> >  
> >  static struct irq_grp_save {
> > 
> > diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
> > index 97c2a08a..861e15c 100644
> > --- a/arch/arm/mach-s5p64x0/pm.c
> > +++ b/arch/arm/mach-s5p64x0/pm.c
> > @@ -18,7 +18,6 @@
> > 
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <plat/wakeup-mask.h>
> >  
> >  #include <mach/regs-clock.h>
> > 
> > @@ -48,8 +47,6 @@ static struct sleep_save s5p64x0_misc_save[] = {
> > 
> >  	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
> >  	SAVE_ITEM(S5P64X0_MEM0DRVCON),
> >  	SAVE_ITEM(S5P64X0_MEM1DRVCON),
> > 
> > -
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > 
> >  };
> >  
> >  /* DPLL is present only in S5P6450 */
> > 
> > diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
> > index 2b68a67..3cf3f9c 100644
> > --- a/arch/arm/mach-s5pv210/pm.c
> > +++ b/arch/arm/mach-s5pv210/pm.c
> > @@ -21,7 +21,6 @@
> > 
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <mach/regs-irq.h>
> >  #include <mach/regs-clock.h>
> > 
> > @@ -77,15 +76,6 @@ static struct sleep_save s5pv210_core_save[] = {
> > 
> >  	/* Clock ETC */
> >  	SAVE_ITEM(S5P_CLK_OUT),
> >  	SAVE_ITEM(S5P_MDNIE_SEL),
> > 
> > -
> > -	/* PWM Register */
> > -	SAVE_ITEM(S3C2410_TCFG0),
> > -	SAVE_ITEM(S3C2410_TCFG1),
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > -	SAVE_ITEM(S3C2410_TCON),
> > -	SAVE_ITEM(S3C2410_TCNTB(0)),
> > -	SAVE_ITEM(S3C2410_TCMPB(0)),
> > -	SAVE_ITEM(S3C2410_TCNTO(0)),
> > 
> >  };
> >  
> >  static int s5pv210_cpu_suspend(unsigned long arg)
> > 
> > diff --git a/arch/arm/plat-samsung/s5p-irq.c
> > b/arch/arm/plat-samsung/s5p-irq.c index 6729cb2..ddfaca9 100644
> > --- a/arch/arm/plat-samsung/s5p-irq.c
> > +++ b/arch/arm/plat-samsung/s5p-irq.c
> > @@ -17,7 +17,6 @@
> > 
> >  #include <mach/irqs.h>
> >  #include <mach/map.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <plat/cpu.h>
> >  
> >  void __init s5p_init_irq(u32 *vic, u32 num_vic)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to
> majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
Date: Thu, 13 Jun 2013 22:38:57 +0200	[thread overview]
Message-ID: <2199978.JEbm7Iqajq@flatron> (raw)
In-Reply-To: <201306132224.33866.heiko@sntech.de>

On Thursday 13 of June 2013 22:24:33 Heiko St?bner wrote:
> Am Mittwoch, 5. Juni 2013, 23:18:19 schrieb Tomasz Figa:
> > This patch removes remaining inclusions of plat/regs-timer.h as a
> > preparation to remove the header.
> 
> hmm, the patch does a bit more than that, as it also removes the saving
> of the registers from the suspend calls, which is most likely handled
> by the driver now. But the description should possibly reflect that.

True, although I couldn't test suspend/resume with these patches, because 
it was already broken before, at least on s3c64xx and/or mini6410.

As an interesting side note, in case of s3c64xx and s5p64x0, existing code 
was not enough to make suspend/resume of the timer work, as it can be seen 
in case of s5pv210, which has it done almost correctly.

Almost, because as far as I know (and I can see in the manual) the TCNTO 
register is read only and there is a separate procedure for loading timer 
value manually.

Thanks for review.

Best regards,
Tomasz

> > Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
> > ---
> > 
> >  arch/arm/mach-s3c64xx/irq-pm.c  |  2 --
> >  arch/arm/mach-s5p64x0/pm.c      |  3 ---
> >  arch/arm/mach-s5pv210/pm.c      | 10 ----------
> >  arch/arm/plat-samsung/s5p-irq.c |  1 -
> >  4 files changed, 16 deletions(-)
> > 
> > diff --git a/arch/arm/mach-s3c64xx/irq-pm.c
> > b/arch/arm/mach-s3c64xx/irq-pm.c index 0c7e1d9..c3da1b6 100644
> > --- a/arch/arm/mach-s3c64xx/irq-pm.c
> > +++ b/arch/arm/mach-s3c64xx/irq-pm.c
> > @@ -22,7 +22,6 @@
> > 
> >  #include <mach/map.h>
> >  
> >  #include <plat/regs-serial.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <mach/regs-gpio.h>
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > @@ -43,7 +42,6 @@ static struct sleep_save irq_save[] = {
> > 
> >  	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
> >  	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
> >  	SAVE_ITEM(S3C64XX_EINT0MASK),
> > 
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > 
> >  };
> >  
> >  static struct irq_grp_save {
> > 
> > diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
> > index 97c2a08a..861e15c 100644
> > --- a/arch/arm/mach-s5p64x0/pm.c
> > +++ b/arch/arm/mach-s5p64x0/pm.c
> > @@ -18,7 +18,6 @@
> > 
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <plat/wakeup-mask.h>
> >  
> >  #include <mach/regs-clock.h>
> > 
> > @@ -48,8 +47,6 @@ static struct sleep_save s5p64x0_misc_save[] = {
> > 
> >  	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
> >  	SAVE_ITEM(S5P64X0_MEM0DRVCON),
> >  	SAVE_ITEM(S5P64X0_MEM1DRVCON),
> > 
> > -
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > 
> >  };
> >  
> >  /* DPLL is present only in S5P6450 */
> > 
> > diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
> > index 2b68a67..3cf3f9c 100644
> > --- a/arch/arm/mach-s5pv210/pm.c
> > +++ b/arch/arm/mach-s5pv210/pm.c
> > @@ -21,7 +21,6 @@
> > 
> >  #include <plat/cpu.h>
> >  #include <plat/pm.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <mach/regs-irq.h>
> >  #include <mach/regs-clock.h>
> > 
> > @@ -77,15 +76,6 @@ static struct sleep_save s5pv210_core_save[] = {
> > 
> >  	/* Clock ETC */
> >  	SAVE_ITEM(S5P_CLK_OUT),
> >  	SAVE_ITEM(S5P_MDNIE_SEL),
> > 
> > -
> > -	/* PWM Register */
> > -	SAVE_ITEM(S3C2410_TCFG0),
> > -	SAVE_ITEM(S3C2410_TCFG1),
> > -	SAVE_ITEM(S3C64XX_TINT_CSTAT),
> > -	SAVE_ITEM(S3C2410_TCON),
> > -	SAVE_ITEM(S3C2410_TCNTB(0)),
> > -	SAVE_ITEM(S3C2410_TCMPB(0)),
> > -	SAVE_ITEM(S3C2410_TCNTO(0)),
> > 
> >  };
> >  
> >  static int s5pv210_cpu_suspend(unsigned long arg)
> > 
> > diff --git a/arch/arm/plat-samsung/s5p-irq.c
> > b/arch/arm/plat-samsung/s5p-irq.c index 6729cb2..ddfaca9 100644
> > --- a/arch/arm/plat-samsung/s5p-irq.c
> > +++ b/arch/arm/plat-samsung/s5p-irq.c
> > @@ -17,7 +17,6 @@
> > 
> >  #include <mach/irqs.h>
> >  #include <mach/map.h>
> > 
> > -#include <plat/regs-timer.h>
> > 
> >  #include <plat/cpu.h>
> >  
> >  void __init s5p_init_irq(u32 *vic, u32 num_vic)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to
> majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2013-06-13 20:38 UTC|newest]

Thread overview: 105+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-05 21:18 [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-05 21:18 ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 01/15] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 02/15] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 03/15] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 04/15] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 05/15] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 06/15] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 07/15] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 08/15] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-13 20:14   ` Heiko Stübner
2013-06-13 20:14     ` Heiko Stübner
2013-06-13 20:18     ` Tomasz Figa
2013-06-13 20:18       ` Tomasz Figa
2013-06-16 17:19   ` Tomasz Figa
2013-06-16 17:19     ` Tomasz Figa
2013-06-16 20:45     ` Kukjin Kim
2013-06-16 20:45       ` Kukjin Kim
2013-06-17 20:29   ` Thierry Reding
2013-06-17 20:29     ` Thierry Reding
2013-06-17 20:50     ` Tomasz Figa
2013-06-17 20:50       ` Tomasz Figa
2013-06-18 22:17       ` Thierry Reding
2013-06-18 22:17         ` Thierry Reding
2013-06-18 22:45         ` Tomasz Figa
2013-06-18 22:45           ` Tomasz Figa
2013-06-19  9:43           ` Thierry Reding
2013-06-19  9:43             ` Thierry Reding
2013-06-19 10:23             ` Tomasz Figa
2013-06-19 10:23               ` Tomasz Figa
2013-06-24 17:52               ` Tomasz Figa
2013-06-24 17:52                 ` Tomasz Figa
2013-06-24 19:50                 ` Thierry Reding
2013-06-24 19:50                   ` Thierry Reding
2013-06-24 20:03                   ` Tomasz Figa
2013-06-24 20:03                     ` Tomasz Figa
2013-06-24 20:28                     ` Thierry Reding
2013-06-24 20:28                       ` Thierry Reding
2013-06-24 20:55                     ` Arnd Bergmann
2013-06-24 20:55                       ` Arnd Bergmann
2013-06-18 17:59     ` Tomasz Figa
2013-06-18 17:59       ` Tomasz Figa
2013-06-18 18:06       ` Kukjin Kim
2013-06-18 18:06         ` Kukjin Kim
2013-06-18 18:13         ` Tomasz Figa
2013-06-18 18:13           ` Tomasz Figa
2013-06-18 21:33           ` Thierry Reding
2013-06-18 21:33             ` Thierry Reding
2013-06-18 21:35             ` Tomasz Figa
2013-06-18 21:35               ` Tomasz Figa
2013-06-18 19:41     ` Tomasz Figa
2013-06-18 19:41       ` Tomasz Figa
2013-06-18 21:40       ` Thierry Reding
2013-06-18 21:40         ` Thierry Reding
2013-06-18 21:42         ` Tomasz Figa
2013-06-18 21:42           ` Tomasz Figa
2013-06-18 22:20           ` Thierry Reding
2013-06-18 22:20             ` Thierry Reding
2013-06-05 21:18 ` [PATCH 09/15] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 10/15] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 11/15] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 12/15] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 13/15] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-13 20:24   ` Heiko Stübner
2013-06-13 20:24     ` Heiko Stübner
2013-06-13 20:38     ` Tomasz Figa [this message]
2013-06-13 20:38       ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 15/15] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-05 21:18   ` Tomasz Figa
2013-06-12 21:48 ` [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-12 21:48   ` Tomasz Figa
2013-06-12 23:00   ` Olof Johansson
2013-06-12 23:00     ` Olof Johansson
2013-06-12 23:13     ` Tomasz Figa
2013-06-12 23:13       ` Tomasz Figa
2013-06-12 23:38       ` Heiko Stübner
2013-06-12 23:38         ` Heiko Stübner
2013-06-12 23:52         ` Sylwester Nawrocki
2013-06-12 23:52           ` Sylwester Nawrocki
2013-06-12 23:52           ` Sylwester Nawrocki
2013-06-13  9:07           ` Tomasz Figa
2013-06-13  9:07             ` Tomasz Figa
2013-06-13 20:17             ` Heiko Stübner
2013-06-13 20:17               ` Heiko Stübner
2013-06-13 20:17               ` Heiko Stübner
2013-06-13 22:27               ` Heiko Stübner
2013-06-13 22:27                 ` Heiko Stübner
2013-06-13 22:27                 ` Heiko Stübner
2013-06-13  0:25     ` Kukjin Kim
2013-06-13  0:25       ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2199978.JEbm7Iqajq@flatron \
    --to=tomasz.figa@gmail.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=heiko@sntech.de \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=sylvester.nawrocki@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=thomas.abraham@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.