* [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver @ 2018-08-11 16:25 ` Craig Tatlor 0 siblings, 0 replies; 6+ messages in thread From: Craig Tatlor @ 2018-08-11 16:25 UTC (permalink / raw) Cc: ctatlor97, linux-arm-msm, Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660. Based off CAF implementation. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> --- .../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 195 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451 +++++++++++++++++ 4 files changed, 1657 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file mode 100644 index 000000000000..85e6c6c17c04 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt @@ -0,0 +1,195 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio149, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@01010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 195492033075..091beadb8a1c 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 0c6f3ddc296d..9b08808a2f1c 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c b/drivers/pinctrl/qcom/pinctrl-sdm660.c new file mode 100644 index 000000000000..ded56111f168 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c @@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Craig Tatlor. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), + PINCTRL_PIN(100, "GPIO_100"), + PINCTRL_PIN(101, "GPIO_101"), + PINCTRL_PIN(102, "GPIO_102"), + PINCTRL_PIN(103, "GPIO_103"), + PINCTRL_PIN(104, "GPIO_104"), + PINCTRL_PIN(105, "GPIO_105"), + PINCTRL_PIN(106, "GPIO_106"), + PINCTRL_PIN(107, "GPIO_107"), + PINCTRL_PIN(108, "GPIO_108"), + PINCTRL_PIN(109, "GPIO_109"), + PINCTRL_PIN(110, "GPIO_110"), + PINCTRL_PIN(111, "GPIO_111"), + PINCTRL_PIN(112, "GPIO_112"), + PINCTRL_PIN(113, "GPIO_113"), + PINCTRL_PIN(114, "SDC1_CLK"), + PINCTRL_PIN(115, "SDC1_CMD"), + PINCTRL_PIN(116, "SDC1_DATA"), + PINCTRL_PIN(117, "SDC2_CLK"), + PINCTRL_PIN(118, "SDC2_CMD"), + PINCTRL_PIN(119, "SDC2_DATA"), + PINCTRL_PIN(120, "SDC1_RCLK"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); +DECLARE_MSM_GPIO_PINS(80); +DECLARE_MSM_GPIO_PINS(81); +DECLARE_MSM_GPIO_PINS(82); +DECLARE_MSM_GPIO_PINS(83); +DECLARE_MSM_GPIO_PINS(84); +DECLARE_MSM_GPIO_PINS(85); +DECLARE_MSM_GPIO_PINS(86); +DECLARE_MSM_GPIO_PINS(87); +DECLARE_MSM_GPIO_PINS(88); +DECLARE_MSM_GPIO_PINS(89); +DECLARE_MSM_GPIO_PINS(90); +DECLARE_MSM_GPIO_PINS(91); +DECLARE_MSM_GPIO_PINS(92); +DECLARE_MSM_GPIO_PINS(93); +DECLARE_MSM_GPIO_PINS(94); +DECLARE_MSM_GPIO_PINS(95); +DECLARE_MSM_GPIO_PINS(96); +DECLARE_MSM_GPIO_PINS(97); +DECLARE_MSM_GPIO_PINS(98); +DECLARE_MSM_GPIO_PINS(99); +DECLARE_MSM_GPIO_PINS(100); +DECLARE_MSM_GPIO_PINS(101); +DECLARE_MSM_GPIO_PINS(102); +DECLARE_MSM_GPIO_PINS(103); +DECLARE_MSM_GPIO_PINS(104); +DECLARE_MSM_GPIO_PINS(105); +DECLARE_MSM_GPIO_PINS(106); +DECLARE_MSM_GPIO_PINS(107); +DECLARE_MSM_GPIO_PINS(108); +DECLARE_MSM_GPIO_PINS(109); +DECLARE_MSM_GPIO_PINS(110); +DECLARE_MSM_GPIO_PINS(111); +DECLARE_MSM_GPIO_PINS(112); +DECLARE_MSM_GPIO_PINS(113); + +static const unsigned int sdc1_clk_pins[] = { 114 }; +static const unsigned int sdc1_cmd_pins[] = { 115 }; +static const unsigned int sdc1_data_pins[] = { 116 }; +static const unsigned int sdc2_clk_pins[] = { 117 }; +static const unsigned int sdc2_cmd_pins[] = { 118 }; +static const unsigned int sdc2_data_pins[] = { 119 }; +static const unsigned int sdc1_rclk_pins[] = { 120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", + "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104", + "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110", + "gpio111", "gpio112", "gpio113", +}; +static const char * const blsp_spi1_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio46", +}; +static const char * const blsp_uim1_groups[] = { + "gpio0", "gpio1", +}; +static const char * const tgu_ch0_groups[] = { + "gpio0", +}; +static const char * const qdss_gpio4_groups[] = { + "gpio0", "gpio36", +}; +static const char * const atest_gpsadc1_groups[] = { + "gpio0", +}; +static const char * const blsp_uart1_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const phase_flag14_groups[] = { + "gpio5", +}; +static const char * const blsp_i2c2_groups[] = { + "gpio6", "gpio7", +}; +static const char * const phase_flag31_groups[] = { + "gpio6", +}; +static const char * const blsp_spi3_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const blsp_spi3_cs1_groups[] = { + "gpio30", +}; +static const char * const blsp_spi3_cs2_groups[] = { + "gpio65", +}; +static const char * const wlan1_adc1_groups[] = { + "gpio8", +}; +static const char * const atest_usb13_groups[] = { + "gpio8", +}; +static const char * const tgu_ch1_groups[] = { + "gpio1", +}; +static const char * const qdss_gpio5_groups[] = { + "gpio1", "gpio37", +}; +static const char * const atest_gpsadc0_groups[] = { + "gpio1", +}; +static const char * const blsp_i2c1_groups[] = { + "gpio2", "gpio3", +}; +static const char * const ddr_bist_groups[] = { + "gpio3", "gpio8", "gpio9", "gpio10", +}; +static const char * const atest_tsens2_groups[] = { + "gpio3", +}; +static const char * const atest_usb1_groups[] = { + "gpio3", +}; +static const char * const blsp_spi2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uim2_groups[] = { + "gpio4", "gpio5", +}; +static const char * const phase_flag3_groups[] = { + "gpio4", +}; +static const char * const bimc_dte1_groups[] = { + "gpio8", "gpio10", +}; +static const char * const wlan1_adc0_groups[] = { + "gpio9", +}; +static const char * const atest_usb12_groups[] = { + "gpio9", +}; +static const char * const bimc_dte0_groups[] = { + "gpio9", "gpio11", +}; +static const char * const blsp_i2c3_groups[] = { + "gpio10", "gpio11", +}; +static const char * const wlan2_adc1_groups[] = { + "gpio10", +}; +static const char * const atest_usb11_groups[] = { + "gpio10", +}; +static const char * const dbg_out_groups[] = { + "gpio11", +}; +static const char * const wlan2_adc0_groups[] = { + "gpio11", +}; +static const char * const atest_usb10_groups[] = { + "gpio11", +}; +static const char * const RCM_MARKER_groups[] = { + "gpio12", "gpio13", +}; +static const char * const blsp_spi4_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; +static const char * const pri_mi2s_groups[] = { + "gpio12", "gpio14", "gpio15", "gpio61", +}; +static const char * const phase_flag26_groups[] = { + "gpio12", +}; +static const char * const qdss_cti0_a_groups[] = { + "gpio49", "gpio50", +}; +static const char * const qdss_cti0_b_groups[] = { + "gpio13", "gpio21", +}; +static const char * const qdss_cti1_a_groups[] = { + "gpio53", "gpio55", +}; +static const char * const qdss_cti1_b_groups[] = { + "gpio12", "gpio66", +}; +static const char * const pri_mi2s_ws_groups[] = { + "gpio13", +}; +static const char * const phase_flag27_groups[] = { + "gpio13", +}; +static const char * const blsp_i2c4_groups[] = { + "gpio14", "gpio15", +}; +static const char * const phase_flag28_groups[] = { + "gpio14", +}; +static const char * const blsp_uart5_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const blsp_spi5_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const blsp_uim5_groups[] = { + "gpio16", "gpio17", +}; +static const char * const phase_flag5_groups[] = { + "gpio17", +}; +static const char * const blsp_i2c5_groups[] = { + "gpio18", "gpio19", +}; +static const char * const blsp_spi6_groups[] = { + "gpio49", "gpio52", "gpio22", "gpio23", +}; +static const char * const blsp_uart2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uim6_groups[] = { + "gpio20", "gpio21", +}; +static const char * const phase_flag11_groups[] = { + "gpio21", +}; +static const char * const vsense_data0_groups[] = { + "gpio21", +}; +static const char * const blsp_i2c6_groups[] = { + "gpio22", "gpio23", +}; +static const char * const phase_flag12_groups[] = { + "gpio22", +}; +static const char * const vsense_data1_groups[] = { + "gpio22", +}; +static const char * const phase_flag13_groups[] = { + "gpio23", +}; +static const char * const vsense_mode_groups[] = { + "gpio23", +}; +static const char * const blsp_spi7_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", +}; +static const char * const blsp_uart6_a_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", +}; +static const char * const blsp_uart6_b_groups[] = { + "gpio28", "gpio29", "gpio30", "gpio31", +}; +static const char * const sec_mi2s_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", "gpio62", +}; +static const char * const sndwire_clk_groups[] = { + "gpio24", +}; +static const char * const phase_flag17_groups[] = { + "gpio24", +}; +static const char * const vsense_clkout_groups[] = { + "gpio24", +}; +static const char * const sndwire_data_groups[] = { + "gpio25", +}; +static const char * const phase_flag18_groups[] = { + "gpio25", +}; +static const char * const blsp_i2c7_groups[] = { + "gpio26", "gpio27", +}; +static const char * const phase_flag19_groups[] = { + "gpio26", +}; +static const char * const vfr_1_groups[] = { + "gpio27", +}; +static const char * const phase_flag20_groups[] = { + "gpio27", +}; +static const char * const NFC_INT_groups[] = { + "gpio28", +}; +static const char * const blsp_spi8_a_groups[] = { + "gpio28", "gpio29", "gpio30", "gpio31", +}; +static const char * const blsp_spi8_b_groups[] = { + "gpio40", "gpio41", "gpio44", "gpio52", +}; +static const char * const m_voc_groups[] = { + "gpio28", +}; +static const char * const phase_flag21_groups[] = { + "gpio28", +}; +static const char * const phase_flag22_groups[] = { + "gpio29", +}; +static const char * const blsp_i2c8_a_groups[] = { + "gpio30", "gpio31", +}; +static const char * const blsp_i2c8_b_groups[] = { + "gpio44", "gpio52", +}; +static const char * const phase_flag23_groups[] = { + "gpio30", +}; +static const char * const NFC_ESE_groups[] = { + "gpio31", +}; +static const char * const pwr_modem_groups[] = { + "gpio31", +}; +static const char * const phase_flag24_groups[] = { + "gpio31", +}; +static const char * const qdss_gpio_groups[] = { + "gpio31", "gpio52", "gpio68", "gpio69", +}; +static const char * const cam_mclk_groups[] = { + "gpio32", "gpio33", "gpio34", "gpio35", +}; +static const char * const pwr_nav_groups[] = { + "gpio32", +}; +static const char * const qdss_gpio0_groups[] = { + "gpio32", "gpio67", +}; +static const char * const qspi_data0_groups[] = { + "gpio33", +}; +static const char * const pwr_crypto_groups[] = { + "gpio33", +}; +static const char * const qdss_gpio1_groups[] = { + "gpio33", "gpio63", +}; +static const char * const qspi_data1_groups[] = { + "gpio34", +}; +static const char * const agera_pll_groups[] = { + "gpio34", "gpio36", +}; +static const char * const qdss_gpio2_groups[] = { + "gpio34", "gpio64", +}; +static const char * const qspi_data2_groups[] = { + "gpio35", +}; +static const char * const jitter_bist_groups[] = { + "gpio35", +}; +static const char * const qdss_gpio3_groups[] = { + "gpio35", "gpio56", +}; +static const char * const qdss_gpio7_groups[] = { + "gpio39", "gpio71", +}; +static const char * const mdss_vsync0_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync1_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync2_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync3_groups[] = { + "gpio42", +}; +static const char * const qdss_gpio9_groups[] = { + "gpio42", "gpio76", +}; +static const char * const atest_usb2_groups[] = { + "gpio35", +}; +static const char * const cci_i2c_groups[] = { + "gpio36", "gpio37", "gpio38", "gpio39", +}; +static const char * const pll_bypassnl_groups[] = { + "gpio36", +}; +static const char * const atest_tsens_groups[] = { + "gpio36", +}; +static const char * const atest_usb21_groups[] = { + "gpio36", +}; +static const char * const pll_reset_groups[] = { + "gpio37", +}; +static const char * const atest_usb23_groups[] = { + "gpio37", +}; +static const char * const qdss_gpio6_groups[] = { + "gpio38", "gpio70", +}; +static const char * const qspi_cs_groups[] = { + "gpio43", "gpio50", +}; +static const char * const qdss_gpio10_groups[] = { + "gpio43", "gpio77", +}; +static const char * const qdss_gpio11_groups[] = { + "gpio44", "gpio79", +}; +static const char * const cci_async_groups[] = { + "gpio45", +}; +static const char * const qdss_gpio12_groups[] = { + "gpio45", "gpio80", +}; +static const char * const qdss_gpio13_groups[] = { + "gpio46", "gpio78", +}; +static const char * const qspi_clk_groups[] = { + "gpio47", +}; +static const char * const phase_flag30_groups[] = { + "gpio47", +}; +static const char * const qdss_gpio14_groups[] = { + "gpio47", "gpio72", +}; +static const char * const qspi_resetn_groups[] = { + "gpio48", +}; +static const char * const phase_flag1_groups[] = { + "gpio48", +}; +static const char * const qdss_gpio15_groups[] = { + "gpio48", "gpio73", +}; +static const char * const phase_flag2_groups[] = { + "gpio49", +}; +static const char * const phase_flag9_groups[] = { + "gpio50", +}; +static const char * const qspi_data3_groups[] = { + "gpio51", +}; +static const char * const phase_flag15_groups[] = { + "gpio51", +}; +static const char * const qdss_gpio8_groups[] = { + "gpio51", "gpio75", +}; +static const char * const phase_flag16_groups[] = { + "gpio52", +}; +static const char * const phase_flag6_groups[] = { + "gpio53", +}; +static const char * const phase_flag29_groups[] = { + "gpio54", +}; +static const char * const phase_flag25_groups[] = { + "gpio55", +}; +static const char * const phase_flag10_groups[] = { + "gpio56", +}; +static const char * const atest_usb20_groups[] = { + "gpio56", +}; +static const char * const gcc_gp1_groups[] = { + "gpio57", "gpio78", +}; +static const char * const phase_flag4_groups[] = { + "gpio57", +}; +static const char * const atest_usb22_groups[] = { + "gpio57", +}; +static const char * const gcc_gp2_groups[] = { + "gpio58", "gpio81", +}; +static const char * const atest_char_groups[] = { + "gpio58", +}; +static const char * const mdp_vsync_groups[] = { + "gpio59", "gpio74", +}; +static const char * const gcc_gp3_groups[] = { + "gpio59", "gpio82", +}; +static const char * const atest_char3_groups[] = { + "gpio59", +}; +static const char * const cri_trng0_groups[] = { + "gpio60", +}; +static const char * const atest_char2_groups[] = { + "gpio60", +}; +static const char * const cri_trng1_groups[] = { + "gpio61", +}; +static const char * const atest_char1_groups[] = { + "gpio61", +}; +static const char * const audio_ref_groups[] = { + "gpio62", +}; +static const char * const cri_trng_groups[] = { + "gpio62", +}; +static const char * const atest_char0_groups[] = { + "gpio62", +}; +static const char * const blsp_spi8_cs1_groups[] = { + "gpio64", +}; +static const char * const blsp_spi8_cs2_groups[] = { + "gpio76", +}; +static const char * const sp_cmu_groups[] = { + "gpio64", +}; +static const char * const nav_pps_a_groups[] = { + "gpio65", +}; +static const char * const nav_pps_b_groups[] = { + "gpio98", +}; +static const char * const nav_pps_c_groups[] = { + "gpio80", +}; +static const char * const gps_tx_a_groups[] = { + "gpio65", +}; +static const char * const gps_tx_b_groups[] = { + "gpio98", +}; +static const char * const gps_tx_c_groups[] = { + "gpio80", +}; +static const char * const adsp_ext_groups[] = { + "gpio65", +}; +static const char * const ssc_irq_groups[] = { + "gpio67", "gpio68", "gpio69", "gpio70", "gpio71", "gpio72", "gpio74", + "gpio75", "gpio76", +}; +static const char * const isense_dbg_groups[] = { + "gpio68", +}; +static const char * const phase_flag0_groups[] = { + "gpio68", +}; +static const char * const phase_flag7_groups[] = { + "gpio69", +}; +static const char * const phase_flag8_groups[] = { + "gpio70", +}; +static const char * const tsense_pwm1_groups[] = { + "gpio71", +}; +static const char * const tsense_pwm2_groups[] = { + "gpio71", +}; +static const char * const mss_lte_groups[] = { + "gpio81", "gpio82", +}; +static const char * const uim2_data_groups[] = { + "gpio83", +}; +static const char * const uim2_clk_groups[] = { + "gpio84", +}; +static const char * const uim2_reset_groups[] = { + "gpio85", +}; +static const char * const uim2_present_groups[] = { + "gpio86", +}; +static const char * const uim1_data_groups[] = { + "gpio87", +}; +static const char * const uim1_clk_groups[] = { + "gpio88", +}; +static const char * const uim1_reset_groups[] = { + "gpio89", +}; +static const char * const uim1_present_groups[] = { + "gpio90", +}; +static const char * const uim_batt_groups[] = { + "gpio91", +}; +static const char * const pa_indicator_groups[] = { + "gpio92", +}; +static const char * const ldo_en_groups[] = { + "gpio97", +}; +static const char * const ldo_update_groups[] = { + "gpio98", +}; +static const char * const qlink_request_groups[] = { + "gpio99", +}; +static const char * const qlink_enable_groups[] = { + "gpio100", +}; +static const char * const prng_rosc_groups[] = { + "gpio102", +}; + +static const struct msm_function sdm660_functions[] = { + FUNCTION(blsp_spi1), + FUNCTION(gpio), + FUNCTION(blsp_uim1), + FUNCTION(tgu_ch0), + FUNCTION(qdss_gpio4), + FUNCTION(atest_gpsadc1), + FUNCTION(blsp_uart1), + FUNCTION(phase_flag14), + FUNCTION(blsp_i2c2), + FUNCTION(phase_flag31), + FUNCTION(blsp_spi3), + FUNCTION(blsp_spi3_cs1), + FUNCTION(blsp_spi3_cs2), + FUNCTION(wlan1_adc1), + FUNCTION(atest_usb13), + FUNCTION(tgu_ch1), + FUNCTION(qdss_gpio5), + FUNCTION(atest_gpsadc0), + FUNCTION(blsp_i2c1), + FUNCTION(ddr_bist), + FUNCTION(atest_tsens2), + FUNCTION(atest_usb1), + FUNCTION(blsp_spi2), + FUNCTION(blsp_uim2), + FUNCTION(phase_flag3), + FUNCTION(bimc_dte1), + FUNCTION(wlan1_adc0), + FUNCTION(atest_usb12), + FUNCTION(bimc_dte0), + FUNCTION(blsp_i2c3), + FUNCTION(wlan2_adc1), + FUNCTION(atest_usb11), + FUNCTION(dbg_out), + FUNCTION(wlan2_adc0), + FUNCTION(atest_usb10), + FUNCTION(blsp_spi4), + FUNCTION(pri_mi2s), + FUNCTION(phase_flag26), + FUNCTION(qdss_cti0_a), + FUNCTION(qdss_cti0_b), + FUNCTION(qdss_cti1_a), + FUNCTION(qdss_cti1_b), + FUNCTION(pri_mi2s_ws), + FUNCTION(phase_flag27), + FUNCTION(blsp_i2c4), + FUNCTION(phase_flag28), + FUNCTION(blsp_uart5), + FUNCTION(blsp_spi5), + FUNCTION(blsp_uim5), + FUNCTION(phase_flag5), + FUNCTION(blsp_i2c5), + FUNCTION(blsp_spi6), + FUNCTION(blsp_uart2), + FUNCTION(blsp_uim6), + FUNCTION(phase_flag11), + FUNCTION(vsense_data0), + FUNCTION(blsp_i2c6), + FUNCTION(phase_flag12), + FUNCTION(vsense_data1), + FUNCTION(phase_flag13), + FUNCTION(vsense_mode), + FUNCTION(blsp_spi7), + FUNCTION(blsp_uart6_a), + FUNCTION(blsp_uart6_b), + FUNCTION(sec_mi2s), + FUNCTION(sndwire_clk), + FUNCTION(phase_flag17), + FUNCTION(vsense_clkout), + FUNCTION(sndwire_data), + FUNCTION(phase_flag18), + FUNCTION(blsp_i2c7), + FUNCTION(phase_flag19), + FUNCTION(vfr_1), + FUNCTION(phase_flag20), + FUNCTION(blsp_spi8_cs1), + FUNCTION(blsp_spi8_cs2), + FUNCTION(m_voc), + FUNCTION(phase_flag21), + FUNCTION(phase_flag22), + FUNCTION(blsp_i2c8_a), + FUNCTION(blsp_i2c8_b), + FUNCTION(phase_flag23), + FUNCTION(pwr_modem), + FUNCTION(phase_flag24), + FUNCTION(qdss_gpio), + FUNCTION(cam_mclk), + FUNCTION(pwr_nav), + FUNCTION(qdss_gpio0), + FUNCTION(qspi_data0), + FUNCTION(pwr_crypto), + FUNCTION(qdss_gpio1), + FUNCTION(qspi_data1), + FUNCTION(agera_pll), + FUNCTION(qdss_gpio2), + FUNCTION(qspi_data2), + FUNCTION(jitter_bist), + FUNCTION(qdss_gpio3), + FUNCTION(qdss_gpio7), + FUNCTION(mdss_vsync0), + FUNCTION(mdss_vsync1), + FUNCTION(mdss_vsync2), + FUNCTION(mdss_vsync3), + FUNCTION(qdss_gpio9), + FUNCTION(atest_usb2), + FUNCTION(cci_i2c), + FUNCTION(pll_bypassnl), + FUNCTION(atest_tsens), + FUNCTION(atest_usb21), + FUNCTION(pll_reset), + FUNCTION(atest_usb23), + FUNCTION(qdss_gpio6), + FUNCTION(qspi_cs), + FUNCTION(qdss_gpio10), + FUNCTION(qdss_gpio11), + FUNCTION(cci_async), + FUNCTION(qdss_gpio12), + FUNCTION(qdss_gpio13), + FUNCTION(qspi_clk), + FUNCTION(phase_flag30), + FUNCTION(qdss_gpio14), + FUNCTION(qspi_resetn), + FUNCTION(phase_flag1), + FUNCTION(qdss_gpio15), + FUNCTION(phase_flag2), + FUNCTION(phase_flag9), + FUNCTION(qspi_data3), + FUNCTION(phase_flag15), + FUNCTION(qdss_gpio8), + FUNCTION(phase_flag16), + FUNCTION(phase_flag6), + FUNCTION(phase_flag29), + FUNCTION(phase_flag25), + FUNCTION(phase_flag10), + FUNCTION(atest_usb20), + FUNCTION(gcc_gp1), + FUNCTION(phase_flag4), + FUNCTION(atest_usb22), + FUNCTION(gcc_gp2), + FUNCTION(atest_char), + FUNCTION(mdp_vsync), + FUNCTION(gcc_gp3), + FUNCTION(atest_char3), + FUNCTION(cri_trng0), + FUNCTION(atest_char2), + FUNCTION(cri_trng1), + FUNCTION(atest_char1), + FUNCTION(audio_ref), + FUNCTION(cri_trng), + FUNCTION(atest_char0), + FUNCTION(blsp_spi8_a), + FUNCTION(blsp_spi8_b), + FUNCTION(sp_cmu), + FUNCTION(nav_pps_a), + FUNCTION(nav_pps_b), + FUNCTION(nav_pps_c), + FUNCTION(gps_tx_a), + FUNCTION(gps_tx_b), + FUNCTION(gps_tx_c), + FUNCTION(adsp_ext), + FUNCTION(ssc_irq), + FUNCTION(isense_dbg), + FUNCTION(phase_flag0), + FUNCTION(phase_flag7), + FUNCTION(phase_flag8), + FUNCTION(tsense_pwm1), + FUNCTION(tsense_pwm2), + FUNCTION(mss_lte), + FUNCTION(uim2_data), + FUNCTION(uim2_clk), + FUNCTION(uim2_reset), + FUNCTION(uim2_present), + FUNCTION(uim1_data), + FUNCTION(uim1_clk), + FUNCTION(uim1_reset), + FUNCTION(uim1_present), + FUNCTION(uim_batt), + FUNCTION(pa_indicator), + FUNCTION(ldo_en), + FUNCTION(ldo_update), + FUNCTION(qlink_request), + FUNCTION(qlink_enable), + FUNCTION(prng_rosc), +}; + +static const struct msm_pingroup sdm660_groups[] = { + PINGROUP(0, SOUTH, blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch0, _, _, qdss_gpio4, atest_gpsadc1, _), + PINGROUP(1, SOUTH, blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch1, _, _, qdss_gpio5, atest_gpsadc0, _), + PINGROUP(2, SOUTH, blsp_spi1, blsp_uart1, blsp_i2c1, _, _, _, _, _, _), + PINGROUP(3, SOUTH, blsp_spi1, blsp_uart1, blsp_i2c1, ddr_bist, _, _, atest_tsens2, atest_usb1, _), + PINGROUP(4, NORTH, blsp_spi2, blsp_uim2, blsp_uart2, phase_flag3, _, _, _, _, _), + PINGROUP(5, SOUTH, blsp_spi2, blsp_uim2, blsp_uart2, phase_flag14, _, _, _, _, _), + PINGROUP(6, SOUTH, blsp_spi2, blsp_i2c2, blsp_uart2, phase_flag31, _, _, _, _, _), + PINGROUP(7, SOUTH, blsp_spi2, blsp_i2c2, blsp_uart2, _, _, _, _, _, _), + PINGROUP(8, NORTH, blsp_spi3, ddr_bist, _, _, _, wlan1_adc1, atest_usb13, bimc_dte1, _), + PINGROUP(9, NORTH, blsp_spi3, ddr_bist, _, _, _, wlan1_adc0, atest_usb12, bimc_dte0, _), + PINGROUP(10, NORTH, blsp_spi3, blsp_i2c3, ddr_bist, _, _, wlan2_adc1, atest_usb11, bimc_dte1, _), + PINGROUP(11, NORTH, blsp_spi3, blsp_i2c3, _, dbg_out, wlan2_adc0, atest_usb10, bimc_dte0, _, _), + PINGROUP(12, NORTH, blsp_spi4, pri_mi2s, _, phase_flag26, qdss_cti1_b, _, _, _, _), + PINGROUP(13, NORTH, blsp_spi4, _, pri_mi2s_ws, _, _, phase_flag27, qdss_cti0_b, _, _), + PINGROUP(14, NORTH, blsp_spi4, blsp_i2c4, pri_mi2s, _, phase_flag28, _, _, _, _), + PINGROUP(15, NORTH, blsp_spi4, blsp_i2c4, pri_mi2s, _, _, _, _, _, _), + PINGROUP(16, CENTER, blsp_uart5, blsp_spi5, blsp_uim5, _, _, _, _, _, _), + PINGROUP(17, CENTER, blsp_uart5, blsp_spi5, blsp_uim5, _, phase_flag5, _, _, _, _), + PINGROUP(18, CENTER, blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), + PINGROUP(19, CENTER, blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), + PINGROUP(20, SOUTH, _, _, blsp_uim6, _, _, _, _, _, _), + PINGROUP(21, SOUTH, _, _, blsp_uim6, _, phase_flag11, qdss_cti0_b, vsense_data0, _, _), + PINGROUP(22, CENTER, blsp_spi6, _, blsp_i2c6, _, phase_flag12, vsense_data1, _, _, _), + PINGROUP(23, CENTER, blsp_spi6, _, blsp_i2c6, _, phase_flag13, vsense_mode, _, _, _), + PINGROUP(24, NORTH, blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_clk, _, _, phase_flag17, vsense_clkout, _), + PINGROUP(25, NORTH, blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_data, _, _, phase_flag18, _, _), + PINGROUP(26, NORTH, blsp_spi7, blsp_uart6_a, blsp_i2c7, sec_mi2s, _, phase_flag19, _, _, _), + PINGROUP(27, NORTH, blsp_spi7, blsp_uart6_a, blsp_i2c7, vfr_1, sec_mi2s, _, phase_flag20, _, _), + PINGROUP(28, CENTER, blsp_spi8_a, blsp_uart6_b, m_voc, _, phase_flag21, _, _, _, _), + PINGROUP(29, CENTER, blsp_spi8_a, blsp_uart6_b, _, _, phase_flag22, _, _, _, _), + PINGROUP(30, CENTER, blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, blsp_spi3_cs1, _, phase_flag23, _, _, _), + PINGROUP(31, CENTER, blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, pwr_modem, _, phase_flag24, qdss_gpio, _, _), + PINGROUP(32, SOUTH, cam_mclk, pwr_nav, _, _, qdss_gpio0, _, _, _, _), + PINGROUP(33, SOUTH, cam_mclk, qspi_data0, pwr_crypto, _, _, qdss_gpio1, _, _, _), + PINGROUP(34, SOUTH, cam_mclk, qspi_data1, agera_pll, _, _, qdss_gpio2, _, _, _), + PINGROUP(35, SOUTH, cam_mclk, qspi_data2, jitter_bist, _, _, qdss_gpio3, _, atest_usb2, _), + PINGROUP(36, SOUTH, cci_i2c, pll_bypassnl, agera_pll, _, _, qdss_gpio4, atest_tsens, atest_usb21, _), + PINGROUP(37, SOUTH, cci_i2c, pll_reset, _, _, qdss_gpio5, atest_usb23, _, _, _), + PINGROUP(38, SOUTH, cci_i2c, _, _, qdss_gpio6, _, _, _, _, _), + PINGROUP(39, SOUTH, cci_i2c, _, _, qdss_gpio7, _, _, _, _, _), + PINGROUP(40, SOUTH, _, _, blsp_spi8_b, _, _, _, _, _, _), + PINGROUP(41, SOUTH, _, _, blsp_spi8_b, _, _, _, _, _, _), + PINGROUP(42, SOUTH, mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, _, _, qdss_gpio9, _, _), + PINGROUP(43, SOUTH, _, _, qspi_cs, _, _, qdss_gpio10, _, _, _), + PINGROUP(44, SOUTH, _, _, blsp_spi8_b, blsp_i2c8_b, _, _, qdss_gpio11, _, _), + PINGROUP(45, SOUTH, cci_async, _, _, qdss_gpio12, _, _, _, _, _), + PINGROUP(46, SOUTH, blsp_spi1, _, _, qdss_gpio13, _, _, _, _, _), + PINGROUP(47, SOUTH, qspi_clk, _, phase_flag30, qdss_gpio14, _, _, _, _, _), + PINGROUP(48, SOUTH, _, phase_flag1, qdss_gpio15, _, _, _, _, _, _), + PINGROUP(49, SOUTH, blsp_spi6, phase_flag2, qdss_cti0_a, _, _, _, _, _, _), + PINGROUP(50, SOUTH, qspi_cs, _, phase_flag9, qdss_cti0_a, _, _, _, _, _), + PINGROUP(51, SOUTH, qspi_data3, _, phase_flag15, qdss_gpio8, _, _, _, _, _), + PINGROUP(52, SOUTH, _, blsp_spi8_b, blsp_i2c8_b, blsp_spi6, phase_flag16, qdss_gpio, _, _, _), + PINGROUP(53, NORTH, _, phase_flag6, qdss_cti1_a, _, _, _, _, _, _), + PINGROUP(54, NORTH, _, _, phase_flag29, _, _, _, _, _, _), + PINGROUP(55, SOUTH, _, phase_flag25, qdss_cti1_a, _, _, _, _, _, _), + PINGROUP(56, SOUTH, _, phase_flag10, qdss_gpio3, _, atest_usb20, _, _, _, _), + PINGROUP(57, SOUTH, gcc_gp1, _, phase_flag4, atest_usb22, _, _, _, _, _), + PINGROUP(58, SOUTH, _, gcc_gp2, _, _, atest_char, _, _, _, _), + PINGROUP(59, NORTH, mdp_vsync, gcc_gp3, _, _, atest_char3, _, _, _, _), + PINGROUP(60, NORTH, cri_trng0, _, _, atest_char2, _, _, _, _, _), + PINGROUP(61, NORTH, pri_mi2s, cri_trng1, _, _, atest_char1, _, _, _, _), + PINGROUP(62, NORTH, sec_mi2s, audio_ref, _, cri_trng, _, _, atest_char0, _, _), + PINGROUP(63, NORTH, _, _, _, qdss_gpio1, _, _, _, _, _), + PINGROUP(64, SOUTH, blsp_spi8_cs1, sp_cmu, _, _, qdss_gpio2, _, _, _, _), + PINGROUP(65, SOUTH, _, nav_pps_a, nav_pps_a, gps_tx_a, blsp_spi3_cs2, adsp_ext, _, _, _), + PINGROUP(66, NORTH, _, _, qdss_cti1_b, _, _, _, _, _, _), + PINGROUP(67, NORTH, _, _, qdss_gpio0, _, _, _, _, _, _), + PINGROUP(68, NORTH, isense_dbg, _, phase_flag0, qdss_gpio, _, _, _, _, _), + PINGROUP(69, NORTH, _, phase_flag7, qdss_gpio, _, _, _, _, _, _), + PINGROUP(70, NORTH, _, phase_flag8, qdss_gpio6, _, _, _, _, _, _), + PINGROUP(71, NORTH, _, _, qdss_gpio7, tsense_pwm1, tsense_pwm2, _, _, _, _), + PINGROUP(72, NORTH, _, qdss_gpio14, _, _, _, _, _, _, _), + PINGROUP(73, NORTH, _, _, qdss_gpio15, _, _, _, _, _, _), + PINGROUP(74, NORTH, mdp_vsync, _, _, _, _, _, _, _, _), + PINGROUP(75, NORTH, _, _, qdss_gpio8, _, _, _, _, _, _), + PINGROUP(76, NORTH, blsp_spi8_cs2, _, _, _, qdss_gpio9, _, _, _, _), + PINGROUP(77, NORTH, _, _, qdss_gpio10, _, _, _, _, _, _), + PINGROUP(78, NORTH, gcc_gp1, _, qdss_gpio13, _, _, _, _, _, _), + PINGROUP(79, SOUTH, _, _, qdss_gpio11, _, _, _, _, _, _), + PINGROUP(80, SOUTH, nav_pps_b, nav_pps_b, gps_tx_c, _, _, qdss_gpio12, _, _, _), + PINGROUP(81, CENTER, mss_lte, gcc_gp2, _, _, _, _, _, _, _), + PINGROUP(82, CENTER, mss_lte, gcc_gp3, _, _, _, _, _, _, _), + PINGROUP(83, SOUTH, uim2_data, _, _, _, _, _, _, _, _), + PINGROUP(84, SOUTH, uim2_clk, _, _, _, _, _, _, _, _), + PINGROUP(85, SOUTH, uim2_reset, _, _, _, _, _, _, _, _), + PINGROUP(86, SOUTH, uim2_present, _, _, _, _, _, _, _, _), + PINGROUP(87, SOUTH, uim1_data, _, _, _, _, _, _, _, _), + PINGROUP(88, SOUTH, uim1_clk, _, _, _, _, _, _, _, _), + PINGROUP(89, SOUTH, uim1_reset, _, _, _, _, _, _, _, _), + PINGROUP(90, SOUTH, uim1_present, _, _, _, _, _, _, _, _), + PINGROUP(91, SOUTH, uim_batt, _, _, _, _, _, _, _, _), + PINGROUP(92, SOUTH, _, _, pa_indicator, _, _, _, _, _, _), + PINGROUP(93, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(94, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(95, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(96, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(97, SOUTH, _, ldo_en, _, _, _, _, _, _, _), + PINGROUP(98, SOUTH, _, nav_pps_c, nav_pps_c, gps_tx_b, ldo_update, _, _, _, _), + PINGROUP(99, SOUTH, qlink_request, _, _, _, _, _, _, _, _), + PINGROUP(100, SOUTH, qlink_enable, _, _, _, _, _, _, _, _), + PINGROUP(101, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(102, SOUTH, _, prng_rosc, _, _, _, _, _, _, _), + PINGROUP(103, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(104, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(105, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(106, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(107, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(108, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(109, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(110, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _), + SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6), + SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3), + SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0), + SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6), + SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3), + SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0), + SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0), +}; + +static const struct msm_pinctrl_soc_data sdm660_pinctrl = { + .pins = sdm660_pins, + .npins = ARRAY_SIZE(sdm660_pins), + .functions = sdm660_functions, + .nfunctions = ARRAY_SIZE(sdm660_functions), + .groups = sdm660_groups, + .ngroups = ARRAY_SIZE(sdm660_groups), + .ngpios = 114, +}; + +static int sdm660_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &sdm660_pinctrl); +} + +static const struct of_device_id sdm660_pinctrl_of_match[] = { + { .compatible = "qcom,sdm660-pinctrl", }, + { }, +}; + +static struct platform_driver sdm660_pinctrl_driver = { + .driver = { + .name = "sdm660-pinctrl", + .of_match_table = sdm660_pinctrl_of_match, + }, + .probe = sdm660_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sdm660_pinctrl_init(void) +{ + return platform_driver_register(&sdm660_pinctrl_driver); +} +arch_initcall(sdm660_pinctrl_init); + +static void __exit sdm660_pinctrl_exit(void) +{ + platform_driver_unregister(&sdm660_pinctrl_driver); +} +module_exit(sdm660_pinctrl_exit); + +MODULE_DESCRIPTION("QTI sdm660 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, sdm660_pinctrl_of_match); -- 2.18.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver @ 2018-08-11 16:25 ` Craig Tatlor 0 siblings, 0 replies; 6+ messages in thread From: Craig Tatlor @ 2018-08-11 16:25 UTC (permalink / raw) Cc: ctatlor97, linux-arm-msm, Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel Add initial pinctrl driver to support pin configuration with pinctrl framework for sdm660. Based off CAF implementation. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> --- .../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 195 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sdm660.c | 1451 +++++++++++++++++ 4 files changed, 1657 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file mode 100644 index 000000000000..85e6c6c17c04 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt @@ -0,0 +1,195 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm660-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio149, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@01010000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 195492033075..091beadb8a1c 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC which are using SSBI for communication with SoC. Example PMIC's devices are pm8058 and pm8921. +config PINCTRL_SDM660 + tristate "Qualcomm Technologies Inc SDM660 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM660 platform. + + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on GPIOLIB && OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 0c6f3ddc296d..9b08808a2f1c 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o +obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c b/drivers/pinctrl/qcom/pinctrl-sdm660.c new file mode 100644 index 000000000000..ded56111f168 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c @@ -0,0 +1,1451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Craig Tatlor. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define NORTH 0x00900000 +#define CENTER 0x00500000 +#define SOUTH 0x00100000 +#define REG_SIZE 0x1000 + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + + +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm660_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), + PINCTRL_PIN(100, "GPIO_100"), + PINCTRL_PIN(101, "GPIO_101"), + PINCTRL_PIN(102, "GPIO_102"), + PINCTRL_PIN(103, "GPIO_103"), + PINCTRL_PIN(104, "GPIO_104"), + PINCTRL_PIN(105, "GPIO_105"), + PINCTRL_PIN(106, "GPIO_106"), + PINCTRL_PIN(107, "GPIO_107"), + PINCTRL_PIN(108, "GPIO_108"), + PINCTRL_PIN(109, "GPIO_109"), + PINCTRL_PIN(110, "GPIO_110"), + PINCTRL_PIN(111, "GPIO_111"), + PINCTRL_PIN(112, "GPIO_112"), + PINCTRL_PIN(113, "GPIO_113"), + PINCTRL_PIN(114, "SDC1_CLK"), + PINCTRL_PIN(115, "SDC1_CMD"), + PINCTRL_PIN(116, "SDC1_DATA"), + PINCTRL_PIN(117, "SDC2_CLK"), + PINCTRL_PIN(118, "SDC2_CMD"), + PINCTRL_PIN(119, "SDC2_DATA"), + PINCTRL_PIN(120, "SDC1_RCLK"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); +DECLARE_MSM_GPIO_PINS(80); +DECLARE_MSM_GPIO_PINS(81); +DECLARE_MSM_GPIO_PINS(82); +DECLARE_MSM_GPIO_PINS(83); +DECLARE_MSM_GPIO_PINS(84); +DECLARE_MSM_GPIO_PINS(85); +DECLARE_MSM_GPIO_PINS(86); +DECLARE_MSM_GPIO_PINS(87); +DECLARE_MSM_GPIO_PINS(88); +DECLARE_MSM_GPIO_PINS(89); +DECLARE_MSM_GPIO_PINS(90); +DECLARE_MSM_GPIO_PINS(91); +DECLARE_MSM_GPIO_PINS(92); +DECLARE_MSM_GPIO_PINS(93); +DECLARE_MSM_GPIO_PINS(94); +DECLARE_MSM_GPIO_PINS(95); +DECLARE_MSM_GPIO_PINS(96); +DECLARE_MSM_GPIO_PINS(97); +DECLARE_MSM_GPIO_PINS(98); +DECLARE_MSM_GPIO_PINS(99); +DECLARE_MSM_GPIO_PINS(100); +DECLARE_MSM_GPIO_PINS(101); +DECLARE_MSM_GPIO_PINS(102); +DECLARE_MSM_GPIO_PINS(103); +DECLARE_MSM_GPIO_PINS(104); +DECLARE_MSM_GPIO_PINS(105); +DECLARE_MSM_GPIO_PINS(106); +DECLARE_MSM_GPIO_PINS(107); +DECLARE_MSM_GPIO_PINS(108); +DECLARE_MSM_GPIO_PINS(109); +DECLARE_MSM_GPIO_PINS(110); +DECLARE_MSM_GPIO_PINS(111); +DECLARE_MSM_GPIO_PINS(112); +DECLARE_MSM_GPIO_PINS(113); + +static const unsigned int sdc1_clk_pins[] = { 114 }; +static const unsigned int sdc1_cmd_pins[] = { 115 }; +static const unsigned int sdc1_data_pins[] = { 116 }; +static const unsigned int sdc2_clk_pins[] = { 117 }; +static const unsigned int sdc2_cmd_pins[] = { 118 }; +static const unsigned int sdc2_data_pins[] = { 119 }; +static const unsigned int sdc1_rclk_pins[] = { 120 }; + +enum sdm660_functions { + msm_mux_blsp_spi1, + msm_mux_gpio, + msm_mux_blsp_uim1, + msm_mux_tgu_ch0, + msm_mux_qdss_gpio4, + msm_mux_atest_gpsadc1, + msm_mux_blsp_uart1, + msm_mux_phase_flag14, + msm_mux_blsp_i2c2, + msm_mux_phase_flag31, + msm_mux_blsp_spi3, + msm_mux_blsp_spi3_cs1, + msm_mux_blsp_spi3_cs2, + msm_mux_wlan1_adc1, + msm_mux_atest_usb13, + msm_mux_tgu_ch1, + msm_mux_qdss_gpio5, + msm_mux_atest_gpsadc0, + msm_mux_blsp_i2c1, + msm_mux_ddr_bist, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_blsp_spi2, + msm_mux_blsp_uim2, + msm_mux_phase_flag3, + msm_mux_bimc_dte1, + msm_mux_wlan1_adc0, + msm_mux_atest_usb12, + msm_mux_bimc_dte0, + msm_mux_blsp_i2c3, + msm_mux_wlan2_adc1, + msm_mux_atest_usb11, + msm_mux_dbg_out, + msm_mux_wlan2_adc0, + msm_mux_atest_usb10, + msm_mux_blsp_spi4, + msm_mux_pri_mi2s, + msm_mux_phase_flag26, + msm_mux_qdss_cti0_a, + msm_mux_qdss_cti0_b, + msm_mux_qdss_cti1_a, + msm_mux_qdss_cti1_b, + msm_mux_pri_mi2s_ws, + msm_mux_phase_flag27, + msm_mux_blsp_i2c4, + msm_mux_phase_flag28, + msm_mux_blsp_uart5, + msm_mux_blsp_spi5, + msm_mux_blsp_uim5, + msm_mux_phase_flag5, + msm_mux_blsp_i2c5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart2, + msm_mux_blsp_uim6, + msm_mux_phase_flag11, + msm_mux_vsense_data0, + msm_mux_blsp_i2c6, + msm_mux_phase_flag12, + msm_mux_vsense_data1, + msm_mux_phase_flag13, + msm_mux_vsense_mode, + msm_mux_blsp_spi7, + msm_mux_blsp_uart6_a, + msm_mux_blsp_uart6_b, + msm_mux_sec_mi2s, + msm_mux_sndwire_clk, + msm_mux_phase_flag17, + msm_mux_vsense_clkout, + msm_mux_sndwire_data, + msm_mux_phase_flag18, + msm_mux_blsp_i2c7, + msm_mux_phase_flag19, + msm_mux_vfr_1, + msm_mux_phase_flag20, + msm_mux_blsp_spi8_cs1, + msm_mux_blsp_spi8_cs2, + msm_mux_m_voc, + msm_mux_phase_flag21, + msm_mux_phase_flag22, + msm_mux_blsp_i2c8_a, + msm_mux_blsp_i2c8_b, + msm_mux_phase_flag23, + msm_mux_pwr_modem, + msm_mux_phase_flag24, + msm_mux_qdss_gpio, + msm_mux_cam_mclk, + msm_mux_pwr_nav, + msm_mux_qdss_gpio0, + msm_mux_qspi_data0, + msm_mux_pwr_crypto, + msm_mux_qdss_gpio1, + msm_mux_qspi_data1, + msm_mux_agera_pll, + msm_mux_qdss_gpio2, + msm_mux_qspi_data2, + msm_mux_jitter_bist, + msm_mux_qdss_gpio3, + msm_mux_qdss_gpio7, + msm_mux_mdss_vsync0, + msm_mux_mdss_vsync1, + msm_mux_mdss_vsync2, + msm_mux_mdss_vsync3, + msm_mux_qdss_gpio9, + msm_mux_atest_usb2, + msm_mux_cci_i2c, + msm_mux_pll_bypassnl, + msm_mux_atest_tsens, + msm_mux_atest_usb21, + msm_mux_pll_reset, + msm_mux_atest_usb23, + msm_mux_qdss_gpio6, + msm_mux_qspi_cs, + msm_mux_qdss_gpio10, + msm_mux_qdss_gpio11, + msm_mux_cci_async, + msm_mux_qdss_gpio12, + msm_mux_qdss_gpio13, + msm_mux_qspi_clk, + msm_mux_phase_flag30, + msm_mux_qdss_gpio14, + msm_mux_qspi_resetn, + msm_mux_phase_flag1, + msm_mux_qdss_gpio15, + msm_mux_phase_flag2, + msm_mux_phase_flag9, + msm_mux_qspi_data3, + msm_mux_phase_flag15, + msm_mux_qdss_gpio8, + msm_mux_phase_flag16, + msm_mux_phase_flag6, + msm_mux_phase_flag29, + msm_mux_phase_flag25, + msm_mux_phase_flag10, + msm_mux_atest_usb20, + msm_mux_gcc_gp1, + msm_mux_phase_flag4, + msm_mux_atest_usb22, + msm_mux_gcc_gp2, + msm_mux_atest_char, + msm_mux_mdp_vsync, + msm_mux_gcc_gp3, + msm_mux_atest_char3, + msm_mux_cri_trng0, + msm_mux_atest_char2, + msm_mux_cri_trng1, + msm_mux_atest_char1, + msm_mux_audio_ref, + msm_mux_cri_trng, + msm_mux_atest_char0, + msm_mux_blsp_spi8_a, + msm_mux_blsp_spi8_b, + msm_mux_sp_cmu, + msm_mux_nav_pps_a, + msm_mux_nav_pps_b, + msm_mux_nav_pps_c, + msm_mux_gps_tx_a, + msm_mux_gps_tx_b, + msm_mux_gps_tx_c, + msm_mux_adsp_ext, + msm_mux_ssc_irq, + msm_mux_isense_dbg, + msm_mux_phase_flag0, + msm_mux_phase_flag7, + msm_mux_phase_flag8, + msm_mux_tsense_pwm1, + msm_mux_tsense_pwm2, + msm_mux_mss_lte, + msm_mux_uim2_data, + msm_mux_uim2_clk, + msm_mux_uim2_reset, + msm_mux_uim2_present, + msm_mux_uim1_data, + msm_mux_uim1_clk, + msm_mux_uim1_reset, + msm_mux_uim1_present, + msm_mux_uim_batt, + msm_mux_pa_indicator, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_qlink_request, + msm_mux_qlink_enable, + msm_mux_prng_rosc, + msm_mux__, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", + "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104", + "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110", + "gpio111", "gpio112", "gpio113", +}; +static const char * const blsp_spi1_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio46", +}; +static const char * const blsp_uim1_groups[] = { + "gpio0", "gpio1", +}; +static const char * const tgu_ch0_groups[] = { + "gpio0", +}; +static const char * const qdss_gpio4_groups[] = { + "gpio0", "gpio36", +}; +static const char * const atest_gpsadc1_groups[] = { + "gpio0", +}; +static const char * const blsp_uart1_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const phase_flag14_groups[] = { + "gpio5", +}; +static const char * const blsp_i2c2_groups[] = { + "gpio6", "gpio7", +}; +static const char * const phase_flag31_groups[] = { + "gpio6", +}; +static const char * const blsp_spi3_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const blsp_spi3_cs1_groups[] = { + "gpio30", +}; +static const char * const blsp_spi3_cs2_groups[] = { + "gpio65", +}; +static const char * const wlan1_adc1_groups[] = { + "gpio8", +}; +static const char * const atest_usb13_groups[] = { + "gpio8", +}; +static const char * const tgu_ch1_groups[] = { + "gpio1", +}; +static const char * const qdss_gpio5_groups[] = { + "gpio1", "gpio37", +}; +static const char * const atest_gpsadc0_groups[] = { + "gpio1", +}; +static const char * const blsp_i2c1_groups[] = { + "gpio2", "gpio3", +}; +static const char * const ddr_bist_groups[] = { + "gpio3", "gpio8", "gpio9", "gpio10", +}; +static const char * const atest_tsens2_groups[] = { + "gpio3", +}; +static const char * const atest_usb1_groups[] = { + "gpio3", +}; +static const char * const blsp_spi2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uim2_groups[] = { + "gpio4", "gpio5", +}; +static const char * const phase_flag3_groups[] = { + "gpio4", +}; +static const char * const bimc_dte1_groups[] = { + "gpio8", "gpio10", +}; +static const char * const wlan1_adc0_groups[] = { + "gpio9", +}; +static const char * const atest_usb12_groups[] = { + "gpio9", +}; +static const char * const bimc_dte0_groups[] = { + "gpio9", "gpio11", +}; +static const char * const blsp_i2c3_groups[] = { + "gpio10", "gpio11", +}; +static const char * const wlan2_adc1_groups[] = { + "gpio10", +}; +static const char * const atest_usb11_groups[] = { + "gpio10", +}; +static const char * const dbg_out_groups[] = { + "gpio11", +}; +static const char * const wlan2_adc0_groups[] = { + "gpio11", +}; +static const char * const atest_usb10_groups[] = { + "gpio11", +}; +static const char * const RCM_MARKER_groups[] = { + "gpio12", "gpio13", +}; +static const char * const blsp_spi4_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; +static const char * const pri_mi2s_groups[] = { + "gpio12", "gpio14", "gpio15", "gpio61", +}; +static const char * const phase_flag26_groups[] = { + "gpio12", +}; +static const char * const qdss_cti0_a_groups[] = { + "gpio49", "gpio50", +}; +static const char * const qdss_cti0_b_groups[] = { + "gpio13", "gpio21", +}; +static const char * const qdss_cti1_a_groups[] = { + "gpio53", "gpio55", +}; +static const char * const qdss_cti1_b_groups[] = { + "gpio12", "gpio66", +}; +static const char * const pri_mi2s_ws_groups[] = { + "gpio13", +}; +static const char * const phase_flag27_groups[] = { + "gpio13", +}; +static const char * const blsp_i2c4_groups[] = { + "gpio14", "gpio15", +}; +static const char * const phase_flag28_groups[] = { + "gpio14", +}; +static const char * const blsp_uart5_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const blsp_spi5_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const blsp_uim5_groups[] = { + "gpio16", "gpio17", +}; +static const char * const phase_flag5_groups[] = { + "gpio17", +}; +static const char * const blsp_i2c5_groups[] = { + "gpio18", "gpio19", +}; +static const char * const blsp_spi6_groups[] = { + "gpio49", "gpio52", "gpio22", "gpio23", +}; +static const char * const blsp_uart2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uim6_groups[] = { + "gpio20", "gpio21", +}; +static const char * const phase_flag11_groups[] = { + "gpio21", +}; +static const char * const vsense_data0_groups[] = { + "gpio21", +}; +static const char * const blsp_i2c6_groups[] = { + "gpio22", "gpio23", +}; +static const char * const phase_flag12_groups[] = { + "gpio22", +}; +static const char * const vsense_data1_groups[] = { + "gpio22", +}; +static const char * const phase_flag13_groups[] = { + "gpio23", +}; +static const char * const vsense_mode_groups[] = { + "gpio23", +}; +static const char * const blsp_spi7_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", +}; +static const char * const blsp_uart6_a_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", +}; +static const char * const blsp_uart6_b_groups[] = { + "gpio28", "gpio29", "gpio30", "gpio31", +}; +static const char * const sec_mi2s_groups[] = { + "gpio24", "gpio25", "gpio26", "gpio27", "gpio62", +}; +static const char * const sndwire_clk_groups[] = { + "gpio24", +}; +static const char * const phase_flag17_groups[] = { + "gpio24", +}; +static const char * const vsense_clkout_groups[] = { + "gpio24", +}; +static const char * const sndwire_data_groups[] = { + "gpio25", +}; +static const char * const phase_flag18_groups[] = { + "gpio25", +}; +static const char * const blsp_i2c7_groups[] = { + "gpio26", "gpio27", +}; +static const char * const phase_flag19_groups[] = { + "gpio26", +}; +static const char * const vfr_1_groups[] = { + "gpio27", +}; +static const char * const phase_flag20_groups[] = { + "gpio27", +}; +static const char * const NFC_INT_groups[] = { + "gpio28", +}; +static const char * const blsp_spi8_a_groups[] = { + "gpio28", "gpio29", "gpio30", "gpio31", +}; +static const char * const blsp_spi8_b_groups[] = { + "gpio40", "gpio41", "gpio44", "gpio52", +}; +static const char * const m_voc_groups[] = { + "gpio28", +}; +static const char * const phase_flag21_groups[] = { + "gpio28", +}; +static const char * const phase_flag22_groups[] = { + "gpio29", +}; +static const char * const blsp_i2c8_a_groups[] = { + "gpio30", "gpio31", +}; +static const char * const blsp_i2c8_b_groups[] = { + "gpio44", "gpio52", +}; +static const char * const phase_flag23_groups[] = { + "gpio30", +}; +static const char * const NFC_ESE_groups[] = { + "gpio31", +}; +static const char * const pwr_modem_groups[] = { + "gpio31", +}; +static const char * const phase_flag24_groups[] = { + "gpio31", +}; +static const char * const qdss_gpio_groups[] = { + "gpio31", "gpio52", "gpio68", "gpio69", +}; +static const char * const cam_mclk_groups[] = { + "gpio32", "gpio33", "gpio34", "gpio35", +}; +static const char * const pwr_nav_groups[] = { + "gpio32", +}; +static const char * const qdss_gpio0_groups[] = { + "gpio32", "gpio67", +}; +static const char * const qspi_data0_groups[] = { + "gpio33", +}; +static const char * const pwr_crypto_groups[] = { + "gpio33", +}; +static const char * const qdss_gpio1_groups[] = { + "gpio33", "gpio63", +}; +static const char * const qspi_data1_groups[] = { + "gpio34", +}; +static const char * const agera_pll_groups[] = { + "gpio34", "gpio36", +}; +static const char * const qdss_gpio2_groups[] = { + "gpio34", "gpio64", +}; +static const char * const qspi_data2_groups[] = { + "gpio35", +}; +static const char * const jitter_bist_groups[] = { + "gpio35", +}; +static const char * const qdss_gpio3_groups[] = { + "gpio35", "gpio56", +}; +static const char * const qdss_gpio7_groups[] = { + "gpio39", "gpio71", +}; +static const char * const mdss_vsync0_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync1_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync2_groups[] = { + "gpio42", +}; +static const char * const mdss_vsync3_groups[] = { + "gpio42", +}; +static const char * const qdss_gpio9_groups[] = { + "gpio42", "gpio76", +}; +static const char * const atest_usb2_groups[] = { + "gpio35", +}; +static const char * const cci_i2c_groups[] = { + "gpio36", "gpio37", "gpio38", "gpio39", +}; +static const char * const pll_bypassnl_groups[] = { + "gpio36", +}; +static const char * const atest_tsens_groups[] = { + "gpio36", +}; +static const char * const atest_usb21_groups[] = { + "gpio36", +}; +static const char * const pll_reset_groups[] = { + "gpio37", +}; +static const char * const atest_usb23_groups[] = { + "gpio37", +}; +static const char * const qdss_gpio6_groups[] = { + "gpio38", "gpio70", +}; +static const char * const qspi_cs_groups[] = { + "gpio43", "gpio50", +}; +static const char * const qdss_gpio10_groups[] = { + "gpio43", "gpio77", +}; +static const char * const qdss_gpio11_groups[] = { + "gpio44", "gpio79", +}; +static const char * const cci_async_groups[] = { + "gpio45", +}; +static const char * const qdss_gpio12_groups[] = { + "gpio45", "gpio80", +}; +static const char * const qdss_gpio13_groups[] = { + "gpio46", "gpio78", +}; +static const char * const qspi_clk_groups[] = { + "gpio47", +}; +static const char * const phase_flag30_groups[] = { + "gpio47", +}; +static const char * const qdss_gpio14_groups[] = { + "gpio47", "gpio72", +}; +static const char * const qspi_resetn_groups[] = { + "gpio48", +}; +static const char * const phase_flag1_groups[] = { + "gpio48", +}; +static const char * const qdss_gpio15_groups[] = { + "gpio48", "gpio73", +}; +static const char * const phase_flag2_groups[] = { + "gpio49", +}; +static const char * const phase_flag9_groups[] = { + "gpio50", +}; +static const char * const qspi_data3_groups[] = { + "gpio51", +}; +static const char * const phase_flag15_groups[] = { + "gpio51", +}; +static const char * const qdss_gpio8_groups[] = { + "gpio51", "gpio75", +}; +static const char * const phase_flag16_groups[] = { + "gpio52", +}; +static const char * const phase_flag6_groups[] = { + "gpio53", +}; +static const char * const phase_flag29_groups[] = { + "gpio54", +}; +static const char * const phase_flag25_groups[] = { + "gpio55", +}; +static const char * const phase_flag10_groups[] = { + "gpio56", +}; +static const char * const atest_usb20_groups[] = { + "gpio56", +}; +static const char * const gcc_gp1_groups[] = { + "gpio57", "gpio78", +}; +static const char * const phase_flag4_groups[] = { + "gpio57", +}; +static const char * const atest_usb22_groups[] = { + "gpio57", +}; +static const char * const gcc_gp2_groups[] = { + "gpio58", "gpio81", +}; +static const char * const atest_char_groups[] = { + "gpio58", +}; +static const char * const mdp_vsync_groups[] = { + "gpio59", "gpio74", +}; +static const char * const gcc_gp3_groups[] = { + "gpio59", "gpio82", +}; +static const char * const atest_char3_groups[] = { + "gpio59", +}; +static const char * const cri_trng0_groups[] = { + "gpio60", +}; +static const char * const atest_char2_groups[] = { + "gpio60", +}; +static const char * const cri_trng1_groups[] = { + "gpio61", +}; +static const char * const atest_char1_groups[] = { + "gpio61", +}; +static const char * const audio_ref_groups[] = { + "gpio62", +}; +static const char * const cri_trng_groups[] = { + "gpio62", +}; +static const char * const atest_char0_groups[] = { + "gpio62", +}; +static const char * const blsp_spi8_cs1_groups[] = { + "gpio64", +}; +static const char * const blsp_spi8_cs2_groups[] = { + "gpio76", +}; +static const char * const sp_cmu_groups[] = { + "gpio64", +}; +static const char * const nav_pps_a_groups[] = { + "gpio65", +}; +static const char * const nav_pps_b_groups[] = { + "gpio98", +}; +static const char * const nav_pps_c_groups[] = { + "gpio80", +}; +static const char * const gps_tx_a_groups[] = { + "gpio65", +}; +static const char * const gps_tx_b_groups[] = { + "gpio98", +}; +static const char * const gps_tx_c_groups[] = { + "gpio80", +}; +static const char * const adsp_ext_groups[] = { + "gpio65", +}; +static const char * const ssc_irq_groups[] = { + "gpio67", "gpio68", "gpio69", "gpio70", "gpio71", "gpio72", "gpio74", + "gpio75", "gpio76", +}; +static const char * const isense_dbg_groups[] = { + "gpio68", +}; +static const char * const phase_flag0_groups[] = { + "gpio68", +}; +static const char * const phase_flag7_groups[] = { + "gpio69", +}; +static const char * const phase_flag8_groups[] = { + "gpio70", +}; +static const char * const tsense_pwm1_groups[] = { + "gpio71", +}; +static const char * const tsense_pwm2_groups[] = { + "gpio71", +}; +static const char * const mss_lte_groups[] = { + "gpio81", "gpio82", +}; +static const char * const uim2_data_groups[] = { + "gpio83", +}; +static const char * const uim2_clk_groups[] = { + "gpio84", +}; +static const char * const uim2_reset_groups[] = { + "gpio85", +}; +static const char * const uim2_present_groups[] = { + "gpio86", +}; +static const char * const uim1_data_groups[] = { + "gpio87", +}; +static const char * const uim1_clk_groups[] = { + "gpio88", +}; +static const char * const uim1_reset_groups[] = { + "gpio89", +}; +static const char * const uim1_present_groups[] = { + "gpio90", +}; +static const char * const uim_batt_groups[] = { + "gpio91", +}; +static const char * const pa_indicator_groups[] = { + "gpio92", +}; +static const char * const ldo_en_groups[] = { + "gpio97", +}; +static const char * const ldo_update_groups[] = { + "gpio98", +}; +static const char * const qlink_request_groups[] = { + "gpio99", +}; +static const char * const qlink_enable_groups[] = { + "gpio100", +}; +static const char * const prng_rosc_groups[] = { + "gpio102", +}; + +static const struct msm_function sdm660_functions[] = { + FUNCTION(blsp_spi1), + FUNCTION(gpio), + FUNCTION(blsp_uim1), + FUNCTION(tgu_ch0), + FUNCTION(qdss_gpio4), + FUNCTION(atest_gpsadc1), + FUNCTION(blsp_uart1), + FUNCTION(phase_flag14), + FUNCTION(blsp_i2c2), + FUNCTION(phase_flag31), + FUNCTION(blsp_spi3), + FUNCTION(blsp_spi3_cs1), + FUNCTION(blsp_spi3_cs2), + FUNCTION(wlan1_adc1), + FUNCTION(atest_usb13), + FUNCTION(tgu_ch1), + FUNCTION(qdss_gpio5), + FUNCTION(atest_gpsadc0), + FUNCTION(blsp_i2c1), + FUNCTION(ddr_bist), + FUNCTION(atest_tsens2), + FUNCTION(atest_usb1), + FUNCTION(blsp_spi2), + FUNCTION(blsp_uim2), + FUNCTION(phase_flag3), + FUNCTION(bimc_dte1), + FUNCTION(wlan1_adc0), + FUNCTION(atest_usb12), + FUNCTION(bimc_dte0), + FUNCTION(blsp_i2c3), + FUNCTION(wlan2_adc1), + FUNCTION(atest_usb11), + FUNCTION(dbg_out), + FUNCTION(wlan2_adc0), + FUNCTION(atest_usb10), + FUNCTION(blsp_spi4), + FUNCTION(pri_mi2s), + FUNCTION(phase_flag26), + FUNCTION(qdss_cti0_a), + FUNCTION(qdss_cti0_b), + FUNCTION(qdss_cti1_a), + FUNCTION(qdss_cti1_b), + FUNCTION(pri_mi2s_ws), + FUNCTION(phase_flag27), + FUNCTION(blsp_i2c4), + FUNCTION(phase_flag28), + FUNCTION(blsp_uart5), + FUNCTION(blsp_spi5), + FUNCTION(blsp_uim5), + FUNCTION(phase_flag5), + FUNCTION(blsp_i2c5), + FUNCTION(blsp_spi6), + FUNCTION(blsp_uart2), + FUNCTION(blsp_uim6), + FUNCTION(phase_flag11), + FUNCTION(vsense_data0), + FUNCTION(blsp_i2c6), + FUNCTION(phase_flag12), + FUNCTION(vsense_data1), + FUNCTION(phase_flag13), + FUNCTION(vsense_mode), + FUNCTION(blsp_spi7), + FUNCTION(blsp_uart6_a), + FUNCTION(blsp_uart6_b), + FUNCTION(sec_mi2s), + FUNCTION(sndwire_clk), + FUNCTION(phase_flag17), + FUNCTION(vsense_clkout), + FUNCTION(sndwire_data), + FUNCTION(phase_flag18), + FUNCTION(blsp_i2c7), + FUNCTION(phase_flag19), + FUNCTION(vfr_1), + FUNCTION(phase_flag20), + FUNCTION(blsp_spi8_cs1), + FUNCTION(blsp_spi8_cs2), + FUNCTION(m_voc), + FUNCTION(phase_flag21), + FUNCTION(phase_flag22), + FUNCTION(blsp_i2c8_a), + FUNCTION(blsp_i2c8_b), + FUNCTION(phase_flag23), + FUNCTION(pwr_modem), + FUNCTION(phase_flag24), + FUNCTION(qdss_gpio), + FUNCTION(cam_mclk), + FUNCTION(pwr_nav), + FUNCTION(qdss_gpio0), + FUNCTION(qspi_data0), + FUNCTION(pwr_crypto), + FUNCTION(qdss_gpio1), + FUNCTION(qspi_data1), + FUNCTION(agera_pll), + FUNCTION(qdss_gpio2), + FUNCTION(qspi_data2), + FUNCTION(jitter_bist), + FUNCTION(qdss_gpio3), + FUNCTION(qdss_gpio7), + FUNCTION(mdss_vsync0), + FUNCTION(mdss_vsync1), + FUNCTION(mdss_vsync2), + FUNCTION(mdss_vsync3), + FUNCTION(qdss_gpio9), + FUNCTION(atest_usb2), + FUNCTION(cci_i2c), + FUNCTION(pll_bypassnl), + FUNCTION(atest_tsens), + FUNCTION(atest_usb21), + FUNCTION(pll_reset), + FUNCTION(atest_usb23), + FUNCTION(qdss_gpio6), + FUNCTION(qspi_cs), + FUNCTION(qdss_gpio10), + FUNCTION(qdss_gpio11), + FUNCTION(cci_async), + FUNCTION(qdss_gpio12), + FUNCTION(qdss_gpio13), + FUNCTION(qspi_clk), + FUNCTION(phase_flag30), + FUNCTION(qdss_gpio14), + FUNCTION(qspi_resetn), + FUNCTION(phase_flag1), + FUNCTION(qdss_gpio15), + FUNCTION(phase_flag2), + FUNCTION(phase_flag9), + FUNCTION(qspi_data3), + FUNCTION(phase_flag15), + FUNCTION(qdss_gpio8), + FUNCTION(phase_flag16), + FUNCTION(phase_flag6), + FUNCTION(phase_flag29), + FUNCTION(phase_flag25), + FUNCTION(phase_flag10), + FUNCTION(atest_usb20), + FUNCTION(gcc_gp1), + FUNCTION(phase_flag4), + FUNCTION(atest_usb22), + FUNCTION(gcc_gp2), + FUNCTION(atest_char), + FUNCTION(mdp_vsync), + FUNCTION(gcc_gp3), + FUNCTION(atest_char3), + FUNCTION(cri_trng0), + FUNCTION(atest_char2), + FUNCTION(cri_trng1), + FUNCTION(atest_char1), + FUNCTION(audio_ref), + FUNCTION(cri_trng), + FUNCTION(atest_char0), + FUNCTION(blsp_spi8_a), + FUNCTION(blsp_spi8_b), + FUNCTION(sp_cmu), + FUNCTION(nav_pps_a), + FUNCTION(nav_pps_b), + FUNCTION(nav_pps_c), + FUNCTION(gps_tx_a), + FUNCTION(gps_tx_b), + FUNCTION(gps_tx_c), + FUNCTION(adsp_ext), + FUNCTION(ssc_irq), + FUNCTION(isense_dbg), + FUNCTION(phase_flag0), + FUNCTION(phase_flag7), + FUNCTION(phase_flag8), + FUNCTION(tsense_pwm1), + FUNCTION(tsense_pwm2), + FUNCTION(mss_lte), + FUNCTION(uim2_data), + FUNCTION(uim2_clk), + FUNCTION(uim2_reset), + FUNCTION(uim2_present), + FUNCTION(uim1_data), + FUNCTION(uim1_clk), + FUNCTION(uim1_reset), + FUNCTION(uim1_present), + FUNCTION(uim_batt), + FUNCTION(pa_indicator), + FUNCTION(ldo_en), + FUNCTION(ldo_update), + FUNCTION(qlink_request), + FUNCTION(qlink_enable), + FUNCTION(prng_rosc), +}; + +static const struct msm_pingroup sdm660_groups[] = { + PINGROUP(0, SOUTH, blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch0, _, _, qdss_gpio4, atest_gpsadc1, _), + PINGROUP(1, SOUTH, blsp_spi1, blsp_uart1, blsp_uim1, tgu_ch1, _, _, qdss_gpio5, atest_gpsadc0, _), + PINGROUP(2, SOUTH, blsp_spi1, blsp_uart1, blsp_i2c1, _, _, _, _, _, _), + PINGROUP(3, SOUTH, blsp_spi1, blsp_uart1, blsp_i2c1, ddr_bist, _, _, atest_tsens2, atest_usb1, _), + PINGROUP(4, NORTH, blsp_spi2, blsp_uim2, blsp_uart2, phase_flag3, _, _, _, _, _), + PINGROUP(5, SOUTH, blsp_spi2, blsp_uim2, blsp_uart2, phase_flag14, _, _, _, _, _), + PINGROUP(6, SOUTH, blsp_spi2, blsp_i2c2, blsp_uart2, phase_flag31, _, _, _, _, _), + PINGROUP(7, SOUTH, blsp_spi2, blsp_i2c2, blsp_uart2, _, _, _, _, _, _), + PINGROUP(8, NORTH, blsp_spi3, ddr_bist, _, _, _, wlan1_adc1, atest_usb13, bimc_dte1, _), + PINGROUP(9, NORTH, blsp_spi3, ddr_bist, _, _, _, wlan1_adc0, atest_usb12, bimc_dte0, _), + PINGROUP(10, NORTH, blsp_spi3, blsp_i2c3, ddr_bist, _, _, wlan2_adc1, atest_usb11, bimc_dte1, _), + PINGROUP(11, NORTH, blsp_spi3, blsp_i2c3, _, dbg_out, wlan2_adc0, atest_usb10, bimc_dte0, _, _), + PINGROUP(12, NORTH, blsp_spi4, pri_mi2s, _, phase_flag26, qdss_cti1_b, _, _, _, _), + PINGROUP(13, NORTH, blsp_spi4, _, pri_mi2s_ws, _, _, phase_flag27, qdss_cti0_b, _, _), + PINGROUP(14, NORTH, blsp_spi4, blsp_i2c4, pri_mi2s, _, phase_flag28, _, _, _, _), + PINGROUP(15, NORTH, blsp_spi4, blsp_i2c4, pri_mi2s, _, _, _, _, _, _), + PINGROUP(16, CENTER, blsp_uart5, blsp_spi5, blsp_uim5, _, _, _, _, _, _), + PINGROUP(17, CENTER, blsp_uart5, blsp_spi5, blsp_uim5, _, phase_flag5, _, _, _, _), + PINGROUP(18, CENTER, blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), + PINGROUP(19, CENTER, blsp_uart5, blsp_spi5, blsp_i2c5, _, _, _, _, _, _), + PINGROUP(20, SOUTH, _, _, blsp_uim6, _, _, _, _, _, _), + PINGROUP(21, SOUTH, _, _, blsp_uim6, _, phase_flag11, qdss_cti0_b, vsense_data0, _, _), + PINGROUP(22, CENTER, blsp_spi6, _, blsp_i2c6, _, phase_flag12, vsense_data1, _, _, _), + PINGROUP(23, CENTER, blsp_spi6, _, blsp_i2c6, _, phase_flag13, vsense_mode, _, _, _), + PINGROUP(24, NORTH, blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_clk, _, _, phase_flag17, vsense_clkout, _), + PINGROUP(25, NORTH, blsp_spi7, blsp_uart6_a, sec_mi2s, sndwire_data, _, _, phase_flag18, _, _), + PINGROUP(26, NORTH, blsp_spi7, blsp_uart6_a, blsp_i2c7, sec_mi2s, _, phase_flag19, _, _, _), + PINGROUP(27, NORTH, blsp_spi7, blsp_uart6_a, blsp_i2c7, vfr_1, sec_mi2s, _, phase_flag20, _, _), + PINGROUP(28, CENTER, blsp_spi8_a, blsp_uart6_b, m_voc, _, phase_flag21, _, _, _, _), + PINGROUP(29, CENTER, blsp_spi8_a, blsp_uart6_b, _, _, phase_flag22, _, _, _, _), + PINGROUP(30, CENTER, blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, blsp_spi3_cs1, _, phase_flag23, _, _, _), + PINGROUP(31, CENTER, blsp_spi8_a, blsp_uart6_b, blsp_i2c8_a, pwr_modem, _, phase_flag24, qdss_gpio, _, _), + PINGROUP(32, SOUTH, cam_mclk, pwr_nav, _, _, qdss_gpio0, _, _, _, _), + PINGROUP(33, SOUTH, cam_mclk, qspi_data0, pwr_crypto, _, _, qdss_gpio1, _, _, _), + PINGROUP(34, SOUTH, cam_mclk, qspi_data1, agera_pll, _, _, qdss_gpio2, _, _, _), + PINGROUP(35, SOUTH, cam_mclk, qspi_data2, jitter_bist, _, _, qdss_gpio3, _, atest_usb2, _), + PINGROUP(36, SOUTH, cci_i2c, pll_bypassnl, agera_pll, _, _, qdss_gpio4, atest_tsens, atest_usb21, _), + PINGROUP(37, SOUTH, cci_i2c, pll_reset, _, _, qdss_gpio5, atest_usb23, _, _, _), + PINGROUP(38, SOUTH, cci_i2c, _, _, qdss_gpio6, _, _, _, _, _), + PINGROUP(39, SOUTH, cci_i2c, _, _, qdss_gpio7, _, _, _, _, _), + PINGROUP(40, SOUTH, _, _, blsp_spi8_b, _, _, _, _, _, _), + PINGROUP(41, SOUTH, _, _, blsp_spi8_b, _, _, _, _, _, _), + PINGROUP(42, SOUTH, mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, _, _, qdss_gpio9, _, _), + PINGROUP(43, SOUTH, _, _, qspi_cs, _, _, qdss_gpio10, _, _, _), + PINGROUP(44, SOUTH, _, _, blsp_spi8_b, blsp_i2c8_b, _, _, qdss_gpio11, _, _), + PINGROUP(45, SOUTH, cci_async, _, _, qdss_gpio12, _, _, _, _, _), + PINGROUP(46, SOUTH, blsp_spi1, _, _, qdss_gpio13, _, _, _, _, _), + PINGROUP(47, SOUTH, qspi_clk, _, phase_flag30, qdss_gpio14, _, _, _, _, _), + PINGROUP(48, SOUTH, _, phase_flag1, qdss_gpio15, _, _, _, _, _, _), + PINGROUP(49, SOUTH, blsp_spi6, phase_flag2, qdss_cti0_a, _, _, _, _, _, _), + PINGROUP(50, SOUTH, qspi_cs, _, phase_flag9, qdss_cti0_a, _, _, _, _, _), + PINGROUP(51, SOUTH, qspi_data3, _, phase_flag15, qdss_gpio8, _, _, _, _, _), + PINGROUP(52, SOUTH, _, blsp_spi8_b, blsp_i2c8_b, blsp_spi6, phase_flag16, qdss_gpio, _, _, _), + PINGROUP(53, NORTH, _, phase_flag6, qdss_cti1_a, _, _, _, _, _, _), + PINGROUP(54, NORTH, _, _, phase_flag29, _, _, _, _, _, _), + PINGROUP(55, SOUTH, _, phase_flag25, qdss_cti1_a, _, _, _, _, _, _), + PINGROUP(56, SOUTH, _, phase_flag10, qdss_gpio3, _, atest_usb20, _, _, _, _), + PINGROUP(57, SOUTH, gcc_gp1, _, phase_flag4, atest_usb22, _, _, _, _, _), + PINGROUP(58, SOUTH, _, gcc_gp2, _, _, atest_char, _, _, _, _), + PINGROUP(59, NORTH, mdp_vsync, gcc_gp3, _, _, atest_char3, _, _, _, _), + PINGROUP(60, NORTH, cri_trng0, _, _, atest_char2, _, _, _, _, _), + PINGROUP(61, NORTH, pri_mi2s, cri_trng1, _, _, atest_char1, _, _, _, _), + PINGROUP(62, NORTH, sec_mi2s, audio_ref, _, cri_trng, _, _, atest_char0, _, _), + PINGROUP(63, NORTH, _, _, _, qdss_gpio1, _, _, _, _, _), + PINGROUP(64, SOUTH, blsp_spi8_cs1, sp_cmu, _, _, qdss_gpio2, _, _, _, _), + PINGROUP(65, SOUTH, _, nav_pps_a, nav_pps_a, gps_tx_a, blsp_spi3_cs2, adsp_ext, _, _, _), + PINGROUP(66, NORTH, _, _, qdss_cti1_b, _, _, _, _, _, _), + PINGROUP(67, NORTH, _, _, qdss_gpio0, _, _, _, _, _, _), + PINGROUP(68, NORTH, isense_dbg, _, phase_flag0, qdss_gpio, _, _, _, _, _), + PINGROUP(69, NORTH, _, phase_flag7, qdss_gpio, _, _, _, _, _, _), + PINGROUP(70, NORTH, _, phase_flag8, qdss_gpio6, _, _, _, _, _, _), + PINGROUP(71, NORTH, _, _, qdss_gpio7, tsense_pwm1, tsense_pwm2, _, _, _, _), + PINGROUP(72, NORTH, _, qdss_gpio14, _, _, _, _, _, _, _), + PINGROUP(73, NORTH, _, _, qdss_gpio15, _, _, _, _, _, _), + PINGROUP(74, NORTH, mdp_vsync, _, _, _, _, _, _, _, _), + PINGROUP(75, NORTH, _, _, qdss_gpio8, _, _, _, _, _, _), + PINGROUP(76, NORTH, blsp_spi8_cs2, _, _, _, qdss_gpio9, _, _, _, _), + PINGROUP(77, NORTH, _, _, qdss_gpio10, _, _, _, _, _, _), + PINGROUP(78, NORTH, gcc_gp1, _, qdss_gpio13, _, _, _, _, _, _), + PINGROUP(79, SOUTH, _, _, qdss_gpio11, _, _, _, _, _, _), + PINGROUP(80, SOUTH, nav_pps_b, nav_pps_b, gps_tx_c, _, _, qdss_gpio12, _, _, _), + PINGROUP(81, CENTER, mss_lte, gcc_gp2, _, _, _, _, _, _, _), + PINGROUP(82, CENTER, mss_lte, gcc_gp3, _, _, _, _, _, _, _), + PINGROUP(83, SOUTH, uim2_data, _, _, _, _, _, _, _, _), + PINGROUP(84, SOUTH, uim2_clk, _, _, _, _, _, _, _, _), + PINGROUP(85, SOUTH, uim2_reset, _, _, _, _, _, _, _, _), + PINGROUP(86, SOUTH, uim2_present, _, _, _, _, _, _, _, _), + PINGROUP(87, SOUTH, uim1_data, _, _, _, _, _, _, _, _), + PINGROUP(88, SOUTH, uim1_clk, _, _, _, _, _, _, _, _), + PINGROUP(89, SOUTH, uim1_reset, _, _, _, _, _, _, _, _), + PINGROUP(90, SOUTH, uim1_present, _, _, _, _, _, _, _, _), + PINGROUP(91, SOUTH, uim_batt, _, _, _, _, _, _, _, _), + PINGROUP(92, SOUTH, _, _, pa_indicator, _, _, _, _, _, _), + PINGROUP(93, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(94, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(95, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(96, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(97, SOUTH, _, ldo_en, _, _, _, _, _, _, _), + PINGROUP(98, SOUTH, _, nav_pps_c, nav_pps_c, gps_tx_b, ldo_update, _, _, _, _), + PINGROUP(99, SOUTH, qlink_request, _, _, _, _, _, _, _, _), + PINGROUP(100, SOUTH, qlink_enable, _, _, _, _, _, _, _, _), + PINGROUP(101, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(102, SOUTH, _, prng_rosc, _, _, _, _, _, _, _), + PINGROUP(103, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(104, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(105, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(106, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(107, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(108, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(109, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(110, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _), + SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6), + SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3), + SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0), + SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6), + SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3), + SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0), + SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0), +}; + +static const struct msm_pinctrl_soc_data sdm660_pinctrl = { + .pins = sdm660_pins, + .npins = ARRAY_SIZE(sdm660_pins), + .functions = sdm660_functions, + .nfunctions = ARRAY_SIZE(sdm660_functions), + .groups = sdm660_groups, + .ngroups = ARRAY_SIZE(sdm660_groups), + .ngpios = 114, +}; + +static int sdm660_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &sdm660_pinctrl); +} + +static const struct of_device_id sdm660_pinctrl_of_match[] = { + { .compatible = "qcom,sdm660-pinctrl", }, + { }, +}; + +static struct platform_driver sdm660_pinctrl_driver = { + .driver = { + .name = "sdm660-pinctrl", + .of_match_table = sdm660_pinctrl_of_match, + }, + .probe = sdm660_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sdm660_pinctrl_init(void) +{ + return platform_driver_register(&sdm660_pinctrl_driver); +} +arch_initcall(sdm660_pinctrl_init); + +static void __exit sdm660_pinctrl_exit(void) +{ + platform_driver_unregister(&sdm660_pinctrl_driver); +} +module_exit(sdm660_pinctrl_exit); + +MODULE_DESCRIPTION("QTI sdm660 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, sdm660_pinctrl_of_match); -- 2.18.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver 2018-08-11 16:25 ` Craig Tatlor (?) @ 2018-08-11 17:27 ` Christian Lamparter 2018-08-12 7:18 ` Craig Tatlor -1 siblings, 1 reply; 6+ messages in thread From: Christian Lamparter @ 2018-08-11 17:27 UTC (permalink / raw) To: Craig Tatlor, linux-arm-msm Cc: Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel On Saturday, August 11, 2018 6:25:19 PM CEST Craig Tatlor wrote: > Add initial pinctrl driver to support pin configuration with > pinctrl framework for sdm660. > Based off CAF implementation. > > Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> > --- > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt > new file mode 100644 > index 000000000000..85e6c6c17c04 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt > @@ -0,0 +1,195 @@ > +Qualcomm Technologies, Inc. SDM660 TLMM block > + > +This binding describes the Top Level Mode Multiplexer block found in the > +SDM660 platform. > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: must be "qcom,sdm660-pinctrl" > + > +- reg: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: the base address and size of the TLMM register space. > + > +- interrupts: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: should specify the TLMM summary IRQ. > + > +- interrupt-controller: > + Usage: required > + Value type: <none> > + Definition: identifies this node as an interrupt controller > + > +- #interrupt-cells: > + Usage: required > + Value type: <u32> > + Definition: must be 2. Specifying the pin number and flags, as defined > + in <dt-bindings/interrupt-controller/irq.h> > + > +- gpio-controller: > + Usage: required > + Value type: <none> > + Definition: identifies this node as a gpio controller > + > +- #gpio-cells: > + Usage: required > + Value type: <u32> > + Definition: must be 2. Specifying the pin number and flags, as defined > + in <dt-bindings/gpio/gpio.h> > + > +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for > +a general description of GPIO and interrupt bindings. You want to specify gpio-ranges here as well. The property is explained in Section "2.1) gpio- and pin-controller interaction" in ../gpio/gpio.txt Without it, the gpio-hogs construct (part of ../gpio/gpio.txt) will cause the driver to fail during boot. (try it, ;-) ) > +Please refer to pinctrl-bindings.txt in this directory for details of the > +common pinctrl bindings used by client devices, including the meaning of the > +phrase "pin configuration node". > + > +The pin configuration nodes act as a container for an arbitrary number of > +subnodes. Each of these subnodes represents some desired configuration for a > +pin, a group, or a list of pins or groups. This configuration can include the > +mux function to select on those pin(s)/group(s), and various pin configuration > +parameters, such as pull-up, drive strength, etc. > + > + > +PIN CONFIGURATION NODES: > + > +The name of each subnode is not important; all subnodes should be enumerated > +and processed purely based on their content. > + > +Each subnode only affects those parameters that are explicitly listed. In > +other words, a subnode that lists a mux function but no pin configuration > +parameters implies no information about any pin configuration parameters. > +Similarly, a pin subnode that describes a pullup parameter implies no > +information about e.g. the mux function. > + > + > +The following generic properties as defined in pinctrl-bindings.txt are valid > +to specify in a pin configuration subnode: > + > +- pins: > + Usage: required > + Value type: <string-array> > + Definition: List of gpio pins affected by the properties specified in > + this subnode. Valid pins are: > + gpio0-gpio149, > + Supports mux, bias and drive-strength > + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, > + Supports bias and drive-strength > + > +- function: > + Usage: required > + Value type: <string> > + Definition: Specify the alternative function to be configured for the > + specified pins. Functions are only valid for gpio pins. > + Valid values are: > + > + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, > + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, > + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, > + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, > + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, > + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, > + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, > + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, > + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, > + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, > + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, > + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, > + atest_usb20, atest_char0, dac_calib10, qdss_stm10, > + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, > + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, > + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, > + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, > + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, > + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, > + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, > + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, > + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, > + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, > + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, > + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, > + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, > + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, > + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, > + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, > + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, > + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, > + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, > + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, > + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, > + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, > + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, > + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, > + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, > + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, > + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, > + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, > + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, > + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, > + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, > + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, > + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, > + gpio > + > +- bias-disable: > + Usage: optional > + Value type: <none> > + Definition: The specified pins should be configued as no pull. > + > +- bias-pull-down: > + Usage: optional > + Value type: <none> > + Definition: The specified pins should be configued as pull down. > + > +- bias-pull-up: > + Usage: optional > + Value type: <none> > + Definition: The specified pins should be configued as pull up. > + > +- output-high: > + Usage: optional > + Value type: <none> > + Definition: The specified pins are configured in output mode, driven > + high. > + Not valid for sdc pins. > + > +- output-low: > + Usage: optional > + Value type: <none> > + Definition: The specified pins are configured in output mode, driven > + low. > + Not valid for sdc pins. > + > +- drive-strength: > + Usage: optional > + Value type: <u32> > + Definition: Selects the drive strength for the specified pins, in mA. > + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 > + > +Example: > + > + tlmm: pinctrl@01010000 { > + compatible = "qcom,sdm660-pinctrl"; > + reg = <0x01010000 0x300000>; > + interrupts = <0 208 0>; > + gpio-controller; > + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 114>; (please verify, I saw that sdm660_pinctrl sets .ngpios = 114.) > + interrupt-controller; > + #interrupt-cells = <2>; > + > + uart_console_active: uart_console_active { > + mux { > + pins = "gpio4", "gpio5"; > + function = "blsp_uart8"; > + }; > + > + config { > + pins = "gpio4", "gpio5"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > + }; [...] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver 2018-08-11 17:27 ` Christian Lamparter @ 2018-08-12 7:18 ` Craig Tatlor 2018-08-12 12:42 ` Christian Lamparter 0 siblings, 1 reply; 6+ messages in thread From: Craig Tatlor @ 2018-08-12 7:18 UTC (permalink / raw) To: Christian Lamparter, linux-arm-msm Cc: Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel On 11 August 2018 18:27:43 BST, Christian Lamparter <chunkeey@gmail.com> wrote: >On Saturday, August 11, 2018 6:25:19 PM CEST Craig Tatlor wrote: >> Add initial pinctrl driver to support pin configuration with >> pinctrl framework for sdm660. >> Based off CAF implementation. >> >> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> >> --- >> >> diff --git >a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >> new file mode 100644 >> index 000000000000..85e6c6c17c04 >> --- /dev/null >> +++ >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >> @@ -0,0 +1,195 @@ >> +Qualcomm Technologies, Inc. SDM660 TLMM block >> + >> +This binding describes the Top Level Mode Multiplexer block found in >the >> +SDM660 platform. >> + >> +- compatible: >> + Usage: required >> + Value type: <string> >> + Definition: must be "qcom,sdm660-pinctrl" >> + >> +- reg: >> + Usage: required >> + Value type: <prop-encoded-array> >> + Definition: the base address and size of the TLMM register space. >> + >> +- interrupts: >> + Usage: required >> + Value type: <prop-encoded-array> >> + Definition: should specify the TLMM summary IRQ. >> + >> +- interrupt-controller: >> + Usage: required >> + Value type: <none> >> + Definition: identifies this node as an interrupt controller >> + >> +- #interrupt-cells: >> + Usage: required >> + Value type: <u32> >> + Definition: must be 2. Specifying the pin number and flags, as >defined >> + in <dt-bindings/interrupt-controller/irq.h> >> + >> +- gpio-controller: >> + Usage: required >> + Value type: <none> >> + Definition: identifies this node as a gpio controller >> + >> +- #gpio-cells: >> + Usage: required >> + Value type: <u32> >> + Definition: must be 2. Specifying the pin number and flags, as >defined >> + in <dt-bindings/gpio/gpio.h> >> + >> +Please refer to ../gpio/gpio.txt and >../interrupt-controller/interrupts.txt for >> +a general description of GPIO and interrupt bindings. >You want to specify gpio-ranges here as well. The property is explained >in Section "2.1) gpio- and pin-controller interaction" in >../gpio/gpio.txt > >Without it, the gpio-hogs construct (part of ../gpio/gpio.txt) will >cause >the driver to fail during boot. (try it, ;-) ) Would gpio-ranges make sense for this, as the gpio and pinctrl are in same block? Seems no other qcom pinctrl drivers have it and I'm able to boot without it. > >> +Please refer to pinctrl-bindings.txt in this directory for details >of the >> +common pinctrl bindings used by client devices, including the >meaning of the >> +phrase "pin configuration node". >> + >> +The pin configuration nodes act as a container for an arbitrary >number of >> +subnodes. Each of these subnodes represents some desired >configuration for a >> +pin, a group, or a list of pins or groups. This configuration can >include the >> +mux function to select on those pin(s)/group(s), and various pin >configuration >> +parameters, such as pull-up, drive strength, etc. >> + >> + >> +PIN CONFIGURATION NODES: >> + >> +The name of each subnode is not important; all subnodes should be >enumerated >> +and processed purely based on their content. >> + >> +Each subnode only affects those parameters that are explicitly >listed. In >> +other words, a subnode that lists a mux function but no pin >configuration >> +parameters implies no information about any pin configuration >parameters. >> +Similarly, a pin subnode that describes a pullup parameter implies >no >> +information about e.g. the mux function. >> + >> + >> +The following generic properties as defined in pinctrl-bindings.txt >are valid >> +to specify in a pin configuration subnode: >> + >> +- pins: >> + Usage: required >> + Value type: <string-array> >> + Definition: List of gpio pins affected by the properties specified >in >> + this subnode. Valid pins are: >> + gpio0-gpio149, >> + Supports mux, bias and drive-strength >> + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data >sdc1_rclk, >> + Supports bias and drive-strength >> + >> +- function: >> + Usage: required >> + Value type: <string> >> + Definition: Specify the alternative function to be configured for >the >> + specified pins. Functions are only valid for gpio pins. >> + Valid values are: >> + >> + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, >> + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, >> + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, >qdss_cti_trig_in_b, >> + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, >> + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, >atest_usb12, >> + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, >> + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, >atest_char, >> + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, >qdss_tracedata_b, >> + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, >cci_i2c, >> + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, >> + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, >> + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, >> + atest_usb20, atest_char0, dac_calib10, qdss_stm10, >> + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, >blsp_uim6, >> + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, >> + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, >> + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, >> + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, >> + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, >> + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, >> + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, >> + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, >> + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, >dac_calib25, >> + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, >> + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, >blsp_i2c3, >> + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, >> + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, >> + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, >blsp_uart11, >> + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, >cri_trng0, >> + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, >blsp_spi4, >> + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, >> + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, >> + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, >> + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, >> + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, >> + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, >> + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, >> + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, >qdss_stm27, >> + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, >tsif2_clk, >> + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, >qdss_tracectl_b, >> + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, >> + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, >blsp11_uart_rx_b, >> + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, >uim_batt, >> + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, >> + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, >gsm_tx, >> + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, >qspi3, >> + gpio >> + >> +- bias-disable: >> + Usage: optional >> + Value type: <none> >> + Definition: The specified pins should be configued as no pull. >> + >> +- bias-pull-down: >> + Usage: optional >> + Value type: <none> >> + Definition: The specified pins should be configued as pull down. >> + >> +- bias-pull-up: >> + Usage: optional >> + Value type: <none> >> + Definition: The specified pins should be configued as pull up. >> + >> +- output-high: >> + Usage: optional >> + Value type: <none> >> + Definition: The specified pins are configured in output mode, >driven >> + high. >> + Not valid for sdc pins. >> + >> +- output-low: >> + Usage: optional >> + Value type: <none> >> + Definition: The specified pins are configured in output mode, >driven >> + low. >> + Not valid for sdc pins. >> + >> +- drive-strength: >> + Usage: optional >> + Value type: <u32> >> + Definition: Selects the drive strength for the specified pins, in >mA. >> + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 >> + >> +Example: >> + >> + tlmm: pinctrl@01010000 { >> + compatible = "qcom,sdm660-pinctrl"; >> + reg = <0x01010000 0x300000>; >> + interrupts = <0 208 0>; >> + gpio-controller; >> + #gpio-cells = <2>; >+ gpio-ranges = <&tlmm 0 0 114>; > >(please verify, I saw that sdm660_pinctrl sets .ngpios = 114.) Yeah, this shouldn't even be there, I just copied my test node from debugging driver which had it. > >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + uart_console_active: uart_console_active { >> + mux { >> + pins = "gpio4", "gpio5"; >> + function = "blsp_uart8"; >> + }; >> + >> + config { >> + pins = "gpio4", "gpio5"; >> + drive-strength = <2>; >> + bias-disable; >> + }; >> + }; >> + }; >[...] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver 2018-08-12 7:18 ` Craig Tatlor @ 2018-08-12 12:42 ` Christian Lamparter 2018-08-12 13:04 ` Craig Tatlor 0 siblings, 1 reply; 6+ messages in thread From: Christian Lamparter @ 2018-08-12 12:42 UTC (permalink / raw) To: Craig Tatlor Cc: linux-arm-msm, Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel On Sunday, August 12, 2018 9:18:19 AM CEST you wrote: > On 11 August 2018 18:27:43 BST, Christian Lamparter <chunkeey@gmail.com> wrote: > >On Saturday, August 11, 2018 6:25:19 PM CEST Craig Tatlor wrote: > >> Add initial pinctrl driver to support pin configuration with > >> pinctrl framework for sdm660. > >> Based off CAF implementation. > >> > >> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> > >> --- > >> > >> diff --git > >a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt > >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt > >> new file mode 100644 > >> index 000000000000..85e6c6c17c04 > >> --- /dev/null > >> +++ > >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt > >> @@ -0,0 +1,195 @@ > >> +Qualcomm Technologies, Inc. SDM660 TLMM block > >> + > >> +This binding describes the Top Level Mode Multiplexer block found in > >the > >> +SDM660 platform. > >> + > >> +- compatible: > >> + Usage: required > >> + Value type: <string> > >> + Definition: must be "qcom,sdm660-pinctrl" > >> + > >> +- reg: > >> + Usage: required > >> + Value type: <prop-encoded-array> > >> + Definition: the base address and size of the TLMM register space. > >> + > >> +- interrupts: > >> + Usage: required > >> + Value type: <prop-encoded-array> > >> + Definition: should specify the TLMM summary IRQ. > >> + > >> +- interrupt-controller: > >> + Usage: required > >> + Value type: <none> > >> + Definition: identifies this node as an interrupt controller > >> + > >> +- #interrupt-cells: > >> + Usage: required > >> + Value type: <u32> > >> + Definition: must be 2. Specifying the pin number and flags, as > >defined > >> + in <dt-bindings/interrupt-controller/irq.h> > >> + > >> +- gpio-controller: > >> + Usage: required > >> + Value type: <none> > >> + Definition: identifies this node as a gpio controller > >> + > >> +- #gpio-cells: > >> + Usage: required > >> + Value type: <u32> > >> + Definition: must be 2. Specifying the pin number and flags, as > >defined > >> + in <dt-bindings/gpio/gpio.h> > >> + > >> +Please refer to ../gpio/gpio.txt and > >../interrupt-controller/interrupts.txt for > >> +a general description of GPIO and interrupt bindings. > >You want to specify gpio-ranges here as well. The property is explained > >in Section "2.1) gpio- and pin-controller interaction" in > >../gpio/gpio.txt > > > >Without it, the gpio-hogs construct (part of ../gpio/gpio.txt) will > >cause > >the driver to fail during boot. (try it, ;-) ) > Would gpio-ranges make sense for this, as the gpio and pinctrl are in same block? Yes, it's part of the ../gpio/gpio.txt which you link. Here's a copy of the relevant section that explains this gpio- and pin-controller interaction. |2.1) gpio- and pin-controller interaction |----------------------------------------- | |Some or all of the GPIOs provided by a GPIO controller may be routed to pins |on the package via a pin controller. This allows muxing those pins between |GPIO and other functions. |It is useful to represent which GPIOs correspond to which pins on which pin |controllers. The gpio-ranges property described below represents this, and |contains information structures as follows: | | gpio-range-list ::= <single-gpio-range> [gpio-range-list] | single-gpio-range ::= <numeric-gpio-range> | <named-gpio-range> | numeric-gpio-range ::= | <pinctrl-phandle> <gpio-base> <pinctrl-base> <count> | named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>' | pinctrl-phandle : phandle to pin controller node | gpio-base : Base GPIO ID in the GPIO controller | pinctrl-base : Base pinctrl pin ID in the pin controller | count : The number of GPIOs/pins in this range | |The "pin controller node" mentioned above must conform to the bindings |described in ../pinctrl/pinctrl-bindings.txt. |... As for the reason why gpio-ranges is what it is, please look at the ML discussion from the "pinctrl: msm: fix gpio-hog related boot issues" thread on <https://patchwork.kernel.org/patch/10339127/> and the posts by Linus Walleij: <https://patchwork.kernel.org/patch/10339127/#21903101> and Stephen Boyd: <https://patchwork.kernel.org/patch/10339127/#21867185>. (It's quite a bit to take in) > Seems no other qcom pinctrl drivers have it and I'm able to boot without it. Ok, let's run an experiment. Please remove the gpio-ranges property and try adding a test gpio-hog to your device's DTS: something like (I randomly selected GPIO5, but it shouldn't matter which gpio you select here. If you know a unused/NC pin/gpio, then you can use it instead): &tlmm { test-hog { gpio-hog; gpios = <5 0>; output-low; line-name = "test hog"; }; }; compile&install it and then watch the kernel on the next boot: without the gpio-ranges present, it will spew out something along the lines of: | requesting hog GPIO test hog (chip 3000000.pinctrl, offset 5) failed, -517 | gpiochip_add_data: GPIOs 0..114 (3000000.pinctrl) failed to register | sdm660-pinctrl 3000000.pinctrl: Failed register gpiochip The single gpio-hog causes havoc and takes down the sdm660-pinctrl with it. And every driver that depends on the pinctrl to setup the pin muxing/config will fail to load as well. (check out /sys/kernel/debug/pinctrl/, it will be empty.) Regards, Christian ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver 2018-08-12 12:42 ` Christian Lamparter @ 2018-08-12 13:04 ` Craig Tatlor 0 siblings, 0 replies; 6+ messages in thread From: Craig Tatlor @ 2018-08-12 13:04 UTC (permalink / raw) To: Christian Lamparter Cc: linux-arm-msm, Bjorn Andersson, Linus Walleij, Rob Herring, Mark Rutland, linux-gpio, devicetree, linux-kernel On 12 August 2018 13:42:27 BST, Christian Lamparter <chunkeey@gmail.com> wrote: >On Sunday, August 12, 2018 9:18:19 AM CEST you wrote: >> On 11 August 2018 18:27:43 BST, Christian Lamparter ><chunkeey@gmail.com> wrote: >> >On Saturday, August 11, 2018 6:25:19 PM CEST Craig Tatlor wrote: >> >> Add initial pinctrl driver to support pin configuration with >> >> pinctrl framework for sdm660. >> >> Based off CAF implementation. >> >> >> >> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> >> >> --- >> >> >> >> diff --git >> >a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >> >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >> >> new file mode 100644 >> >> index 000000000000..85e6c6c17c04 >> >> --- /dev/null >> >> +++ >> >b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt >> >> @@ -0,0 +1,195 @@ >> >> +Qualcomm Technologies, Inc. SDM660 TLMM block >> >> + >> >> +This binding describes the Top Level Mode Multiplexer block found >in >> >the >> >> +SDM660 platform. >> >> + >> >> +- compatible: >> >> + Usage: required >> >> + Value type: <string> >> >> + Definition: must be "qcom,sdm660-pinctrl" >> >> + >> >> +- reg: >> >> + Usage: required >> >> + Value type: <prop-encoded-array> >> >> + Definition: the base address and size of the TLMM register >space. >> >> + >> >> +- interrupts: >> >> + Usage: required >> >> + Value type: <prop-encoded-array> >> >> + Definition: should specify the TLMM summary IRQ. >> >> + >> >> +- interrupt-controller: >> >> + Usage: required >> >> + Value type: <none> >> >> + Definition: identifies this node as an interrupt controller >> >> + >> >> +- #interrupt-cells: >> >> + Usage: required >> >> + Value type: <u32> >> >> + Definition: must be 2. Specifying the pin number and flags, as >> >defined >> >> + in <dt-bindings/interrupt-controller/irq.h> >> >> + >> >> +- gpio-controller: >> >> + Usage: required >> >> + Value type: <none> >> >> + Definition: identifies this node as a gpio controller >> >> + >> >> +- #gpio-cells: >> >> + Usage: required >> >> + Value type: <u32> >> >> + Definition: must be 2. Specifying the pin number and flags, as >> >defined >> >> + in <dt-bindings/gpio/gpio.h> >> >> + >> >> +Please refer to ../gpio/gpio.txt and >> >../interrupt-controller/interrupts.txt for >> >> +a general description of GPIO and interrupt bindings. >> >You want to specify gpio-ranges here as well. The property is >explained >> >in Section "2.1) gpio- and pin-controller interaction" in >> >../gpio/gpio.txt >> > >> >Without it, the gpio-hogs construct (part of ../gpio/gpio.txt) will >> >cause >> >the driver to fail during boot. (try it, ;-) ) >> Would gpio-ranges make sense for this, as the gpio and pinctrl are in >same block? >Yes, it's part of the ../gpio/gpio.txt which you link. >Here's a copy of the relevant section that explains this >gpio- and pin-controller interaction. > > >|2.1) gpio- and pin-controller interaction >|----------------------------------------- >| >|Some or all of the GPIOs provided by a GPIO controller may be routed >to pins >|on the package via a pin controller. This allows muxing those pins >between >|GPIO and other functions. >|It is useful to represent which GPIOs correspond to which pins on >which pin >|controllers. The gpio-ranges property described below represents this, >and >|contains information structures as follows: >| >| gpio-range-list ::= <single-gpio-range> [gpio-range-list] >| single-gpio-range ::= <numeric-gpio-range> | <named-gpio-range> >| numeric-gpio-range ::= >| <pinctrl-phandle> <gpio-base> <pinctrl-base> ><count> >| named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>' >| pinctrl-phandle : phandle to pin controller node >| gpio-base : Base GPIO ID in the GPIO controller >| pinctrl-base : Base pinctrl pin ID in the pin controller >| count : The number of GPIOs/pins in this range >| >|The "pin controller node" mentioned above must conform to the bindings >|described in ../pinctrl/pinctrl-bindings.txt. >|... > >As for the reason why gpio-ranges is what it is, please look at the ML >discussion from the "pinctrl: msm: fix gpio-hog related boot issues" >thread >on <https://patchwork.kernel.org/patch/10339127/> and the posts by >Linus Walleij: <https://patchwork.kernel.org/patch/10339127/#21903101> >and >Stephen Boyd: <https://patchwork.kernel.org/patch/10339127/#21867185>. >(It's quite a bit to take in) Thanks for the links, makes sense now, I'll add in v2. > >> Seems no other qcom pinctrl drivers have it and I'm able to boot >without it. >Ok, let's run an experiment. Please remove the gpio-ranges property and >try >adding a test gpio-hog to your device's DTS: > >something like (I randomly selected GPIO5, but it shouldn't >matter which gpio you select here. If you know a unused/NC >pin/gpio, then you can use it instead): > >&tlmm { > test-hog { > gpio-hog; > gpios = <5 0>; > output-low; > line-name = "test hog"; > }; >}; > >compile&install it and then watch the kernel on the next boot: > >without the gpio-ranges present, it will spew out something along the >lines of: > >| requesting hog GPIO test hog (chip 3000000.pinctrl, offset 5) failed, >-517 >| gpiochip_add_data: GPIOs 0..114 (3000000.pinctrl) failed to register >| sdm660-pinctrl 3000000.pinctrl: Failed register gpiochip > >The single gpio-hog causes havoc and takes down the sdm660-pinctrl with >it. >And every driver that depends on the pinctrl to setup the pin >muxing/config >will fail to load as well. (check out /sys/kernel/debug/pinctrl/, it >will be >empty.) Yup > >Regards, >Christian -- ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-08-12 13:04 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-08-11 16:25 [PATCH] pinctrl: qcom: Add sdm660 pinctrl driver Craig Tatlor 2018-08-11 16:25 ` Craig Tatlor 2018-08-11 17:27 ` Christian Lamparter 2018-08-12 7:18 ` Craig Tatlor 2018-08-12 12:42 ` Christian Lamparter 2018-08-12 13:04 ` Craig Tatlor
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.