* [PATCH v2] arm64: dts: rockchip: Add Orange Pi 5 Max board @ 2024-10-31 3:14 ` Jimmy Hon 0 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip Changes in v2: - squashed commits together for initial board file Link to v1: https://lore.kernel.org/linux-rockchip/20241026100310.52679-1-honyuenkwun@gmail.com/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] arm64: dts: rockchip: Add Orange Pi 5 Max board @ 2024-10-31 3:14 ` Jimmy Hon 0 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip Changes in v2: - squashed commits together for initial board file Link to v1: https://lore.kernel.org/linux-rockchip/20241026100310.52679-1-honyuenkwun@gmail.com/ _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max 2024-10-31 3:14 ` Jimmy Hon @ 2024-10-31 3:14 ` Jimmy Hon -1 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Add devicetree binding for the Xunlong Orange Pi 5 Max board. The Orange Pi 5 Max is a single board computer powered by the Rockchip RK3588. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 1ef09fbfdfaf..8998cfe34fda 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1001,6 +1001,11 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 + - description: Xunlong Orange Pi 5 Max + items: + - const: xunlong,orangepi-5-max + - const: rockchip,rk3588 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus -- 2.47.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max @ 2024-10-31 3:14 ` Jimmy Hon 0 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Add devicetree binding for the Xunlong Orange Pi 5 Max board. The Orange Pi 5 Max is a single board computer powered by the Rockchip RK3588. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 1ef09fbfdfaf..8998cfe34fda 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1001,6 +1001,11 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 + - description: Xunlong Orange Pi 5 Max + items: + - const: xunlong,orangepi-5-max + - const: rockchip,rk3588 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus -- 2.47.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max 2024-10-31 3:14 ` Jimmy Hon @ 2024-10-31 8:31 ` Krzysztof Kozlowski -1 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2024-10-31 8:31 UTC (permalink / raw) To: Jimmy Hon Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip On Wed, Oct 30, 2024 at 10:14:50PM -0500, Jimmy Hon wrote: > Add devicetree binding for the Xunlong Orange Pi 5 Max board. > > The Orange Pi 5 Max is a single board computer powered by the Rockchip > RK3588. > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max @ 2024-10-31 8:31 ` Krzysztof Kozlowski 0 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2024-10-31 8:31 UTC (permalink / raw) To: Jimmy Hon Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip On Wed, Oct 30, 2024 at 10:14:50PM -0500, Jimmy Hon wrote: > Add devicetree binding for the Xunlong Orange Pi 5 Max board. > > The Orange Pi 5 Max is a single board computer powered by the Rockchip > RK3588. > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Max board 2024-10-31 3:14 ` Jimmy Hon @ 2024-10-31 3:14 ` Jimmy Hon -1 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI0 the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-orangepi-5-max.dts | 887 ++++++++++++++++++ 2 files changed, 888 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..f910414f0b34 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts new file mode 100644 index 000000000000..d31b13f99fdc --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3588.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + /* BOOT_SARADC_IN0 */ + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <2000>; + }; + }; + + amp_audio: audio-amplifier { + compatible = "simple-audio-amplifier"; + /* PHONE_CTL */ + enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "rockchip,es8388"; + simple-audio-card,aux-devs = <&_audio>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + /*TODO: SARADC_VIN3_HP_HOOK is used as MIC detection / key input */ + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 70 75 80 100>; + fan-supply = <&vcc5v0_sys>; + /* FAN_CTL_H */ + pwms = <&pwm9 0 50000 0>; + #cooling-cells = <2>; + }; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + blue_led: led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + /* PWM_LED1 */ + pwms = <&pwm4 0 25000 0>; + }; + + green_led: led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + /* PWM_LED2 */ + pwms = <&pwm5 0 25000 0>; + }; + }; + + /* PMIC_EXT_EN */ + vcc_1v1_nldo_s3: vcc-1v1-ndlo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* pcie eth. not a real regulator. 33VAUX */ + vcc_3v3_aux: vcc-3v3-aux-regulator { + compatible = "regulator-fixed"; + /* Ethernet_power_en */ + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + regulator-name = "33vaux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* PCIE_PWREN_H */ + gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Regulator is enabled whenever vcc_1v8_s0 is on */ + vcc_3v3_s0: vcc-3v3-s0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* Represents the vcc5v0_usb20 in the schematic */ + /* Also represents the vcc5v0_usb30 in the schematic, + both regulators share the same enable gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* USB_HOST_PWREN */ + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* USB_OTG_PWREN */ + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + regulator-name = "vcc5v0_usb30_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + /* RTC_INT_L */ + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_1v8_s0>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +/* phy2 */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_aux>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +&pwm9 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm9m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + /* SDMMC_DET_L */ + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + hdmi_vdda0v85_s0: nldo-reg3 { + regulator-name = "hdmi_vdda0v85_s0"; + regulator-always-on; + regulator-boot-on; + /* + * The schematic mentions that actual setting + * should be 0.8375V. RK3588 datasheet specifies + * maximum as 0.825V. So we set datasheet max + * here. + */ + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <825000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb30_otg>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usbdp_phy0 { + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; -- 2.47.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Max board @ 2024-10-31 3:14 ` Jimmy Hon 0 siblings, 0 replies; 10+ messages in thread From: Jimmy Hon @ 2024-10-31 3:14 UTC (permalink / raw) To: Heiko Stuebner Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI0 the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-orangepi-5-max.dts | 887 ++++++++++++++++++ 2 files changed, 888 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..f910414f0b34 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts new file mode 100644 index 000000000000..d31b13f99fdc --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3588.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + /* BOOT_SARADC_IN0 */ + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <2000>; + }; + }; + + amp_audio: audio-amplifier { + compatible = "simple-audio-amplifier"; + /* PHONE_CTL */ + enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "rockchip,es8388"; + simple-audio-card,aux-devs = <&_audio>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + /*TODO: SARADC_VIN3_HP_HOOK is used as MIC detection / key input */ + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 70 75 80 100>; + fan-supply = <&vcc5v0_sys>; + /* FAN_CTL_H */ + pwms = <&pwm9 0 50000 0>; + #cooling-cells = <2>; + }; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + blue_led: led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + /* PWM_LED1 */ + pwms = <&pwm4 0 25000 0>; + }; + + green_led: led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + /* PWM_LED2 */ + pwms = <&pwm5 0 25000 0>; + }; + }; + + /* PMIC_EXT_EN */ + vcc_1v1_nldo_s3: vcc-1v1-ndlo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* pcie eth. not a real regulator. 33VAUX */ + vcc_3v3_aux: vcc-3v3-aux-regulator { + compatible = "regulator-fixed"; + /* Ethernet_power_en */ + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + regulator-name = "33vaux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* PCIE_PWREN_H */ + gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Regulator is enabled whenever vcc_1v8_s0 is on */ + vcc_3v3_s0: vcc-3v3-s0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* Represents the vcc5v0_usb20 in the schematic */ + /* Also represents the vcc5v0_usb30 in the schematic, + both regulators share the same enable gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* USB_HOST_PWREN */ + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* USB_OTG_PWREN */ + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + regulator-name = "vcc5v0_usb30_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + /* RTC_INT_L */ + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_1v8_s0>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +/* phy2 */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_aux>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +&pwm9 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm9m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + /* SDMMC_DET_L */ + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + hdmi_vdda0v85_s0: nldo-reg3 { + regulator-name = "hdmi_vdda0v85_s0"; + regulator-always-on; + regulator-boot-on; + /* + * The schematic mentions that actual setting + * should be 0.8375V. RK3588 datasheet specifies + * maximum as 0.825V. So we set datasheet max + * here. + */ + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <825000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb30_otg>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usbdp_phy0 { + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; -- 2.47.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Max board 2024-10-31 3:14 ` Jimmy Hon @ 2024-11-09 18:23 ` Heiko Stübner -1 siblings, 0 replies; 10+ messages in thread From: Heiko Stübner @ 2024-11-09 18:23 UTC (permalink / raw) To: Jimmy Hon Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, Am Donnerstag, 31. Oktober 2024, 04:14:51 CET schrieb Jimmy Hon: > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts > new file mode 100644 > index 000000000000..d31b13f99fdc > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts > @@ -0,0 +1,887 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include "rk3588.dtsi" can you check how similar the rk3588-orangepi--5-max is to the already existing orangepi-5-plus please? For rk3588s-orangepi-5 and orangepi-5b we already have this nicely shared dtsi for commit things, and somehow I assume this might be similar for 5-plus vs 5-max. > + > +/ { > + model = "Xunlong Orange Pi 5 Max"; > + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; > + [...] > + /* PMIC_EXT_EN */ > + vcc_1v1_nldo_s3: vcc-1v1-ndlo-s3-regulator { vcc_1v1_nldo_s3: regulator-vcc-1v1-ndlo-s3 { preferred pattern for fixed-regulator nodenames is regulator-...... Same for the othe fixed regulators below. > + compatible = "regulator-fixed"; > + regulator-name = "vcc_1v1_nldo_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* pcie eth. not a real regulator. 33VAUX */ > + vcc_3v3_aux: vcc-3v3-aux-regulator { > + compatible = "regulator-fixed"; > + /* Ethernet_power_en */ > + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; > + regulator-name = "33vaux"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <50000>; > + vin-supply = <&vcc_3v3_s3>; > + }; > + > + vcc3v3_pcie30: vcc3v3-pcie30-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* PCIE_PWREN_H */ > + gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v3_pcie30"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* Regulator is enabled whenever vcc_1v8_s0 is on */ > + vcc_3v3_s0: vcc-3v3-s0-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_3v3_s3>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc5v0_sys: vcc5v0-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + /* Represents the vcc5v0_usb20 in the schematic */ > + /* Also represents the vcc5v0_usb30 in the schematic, > + both regulators share the same enable gpio */ please make that one comment block and use appropriate formatting /* * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, * both regulators share the same enable gpio */ > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* USB_HOST_PWREN */ > + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_host_pwren>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* USB_OTG_PWREN */ > + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_otg_pwren>; > + regulator-name = "vcc5v0_usb30_otg"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + /* RTC_INT_L */ what does this comment try to explain? If that is the name of the pin, just name the pinctrl below accordingly (instead of hym8563_int if applicable) . > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + wakeup-source; > + }; > +}; > + > +&pwm9 { > + pinctrl-names = "active"; this needs to be "default" to actually work > + pinctrl-0 = <&pwm9m2_pins>; > + status = "okay"; > +}; Thanks Heiko ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Max board @ 2024-11-09 18:23 ` Heiko Stübner 0 siblings, 0 replies; 10+ messages in thread From: Heiko Stübner @ 2024-11-09 18:23 UTC (permalink / raw) To: Jimmy Hon Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ondrej Jirman, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, Am Donnerstag, 31. Oktober 2024, 04:14:51 CET schrieb Jimmy Hon: > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts > new file mode 100644 > index 000000000000..d31b13f99fdc > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts > @@ -0,0 +1,887 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include "rk3588.dtsi" can you check how similar the rk3588-orangepi--5-max is to the already existing orangepi-5-plus please? For rk3588s-orangepi-5 and orangepi-5b we already have this nicely shared dtsi for commit things, and somehow I assume this might be similar for 5-plus vs 5-max. > + > +/ { > + model = "Xunlong Orange Pi 5 Max"; > + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; > + [...] > + /* PMIC_EXT_EN */ > + vcc_1v1_nldo_s3: vcc-1v1-ndlo-s3-regulator { vcc_1v1_nldo_s3: regulator-vcc-1v1-ndlo-s3 { preferred pattern for fixed-regulator nodenames is regulator-...... Same for the othe fixed regulators below. > + compatible = "regulator-fixed"; > + regulator-name = "vcc_1v1_nldo_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* pcie eth. not a real regulator. 33VAUX */ > + vcc_3v3_aux: vcc-3v3-aux-regulator { > + compatible = "regulator-fixed"; > + /* Ethernet_power_en */ > + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; > + regulator-name = "33vaux"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <50000>; > + vin-supply = <&vcc_3v3_s3>; > + }; > + > + vcc3v3_pcie30: vcc3v3-pcie30-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* PCIE_PWREN_H */ > + gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; > + regulator-name = "vcc3v3_pcie30"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + startup-delay-us = <5000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* Regulator is enabled whenever vcc_1v8_s0 is on */ > + vcc_3v3_s0: vcc-3v3-s0-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_3v3_s3>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc5v0_sys: vcc5v0-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + /* Represents the vcc5v0_usb20 in the schematic */ > + /* Also represents the vcc5v0_usb30 in the schematic, > + both regulators share the same enable gpio */ please make that one comment block and use appropriate formatting /* * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, * both regulators share the same enable gpio */ > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* USB_HOST_PWREN */ > + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_host_pwren>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + /* USB_OTG_PWREN */ > + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_otg_pwren>; > + regulator-name = "vcc5v0_usb30_otg"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + /* RTC_INT_L */ what does this comment try to explain? If that is the name of the pin, just name the pinctrl below accordingly (instead of hym8563_int if applicable) . > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + wakeup-source; > + }; > +}; > + > +&pwm9 { > + pinctrl-names = "active"; this needs to be "default" to actually work > + pinctrl-0 = <&pwm9m2_pins>; > + status = "okay"; > +}; Thanks Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2024-11-09 18:26 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-10-31 3:14 [PATCH v2] arm64: dts: rockchip: Add Orange Pi 5 Max board Jimmy Hon 2024-10-31 3:14 ` Jimmy Hon 2024-10-31 3:14 ` [PATCH 1/2] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max Jimmy Hon 2024-10-31 3:14 ` Jimmy Hon 2024-10-31 8:31 ` Krzysztof Kozlowski 2024-10-31 8:31 ` Krzysztof Kozlowski 2024-10-31 3:14 ` [PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Max board Jimmy Hon 2024-10-31 3:14 ` Jimmy Hon 2024-11-09 18:23 ` Heiko Stübner 2024-11-09 18:23 ` Heiko Stübner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.