* android-bluez with usb adapter
@ 2015-02-17 21:16 Keith Conger
2015-02-17 21:47 ` Szymon Janc
0 siblings, 1 reply; 18+ messages in thread
From: Keith Conger @ 2015-02-17 21:16 UTC (permalink / raw)
To: linux-bluetooth
I'm trying to swap out bluedroid with android-bluez to add bluetooth
usb adapter support into KitKat for my Beaglebone Black(ARM). Should
this be possible?
I followed this guide,
http://forum.xda-developers.com/showthread.php?t=2640723 skipping the
CSR parts.
Here is a logcat with debugging enabled. I've googled the errors and
have had no luck. Does anyone have any ideas?
I/bluetoothd( 1072): Bluetooth daemon 5.28
D/bluetoothd( 1072):
external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff:
0x3400, perm: 0x3400, inh: 0x0
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start()
index -1
I/bluetoothd( 1072): Starting SDP server
D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main()
Entering main loop
I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001
I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00
..??..
I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00
..??........
I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:read_version_complete()
I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized
I/bluetoothd( 1072): Kernel connection control will be used
I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003
I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00
..??..
I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00
..??.........
I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
Number of controllers: 1
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004
I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00
......
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7
18 00 03 .........?66?...
I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00
42 43 4d ..?..........BCM
I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00
00 00 00 2045B3..........
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00
.
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:read_info_complete()
D/bluetoothd( 1072):
external/bluetooth/bluez/src/sdpd-service.c:register_device_id()
Adding device id record for 0002:1d6b:0247:051c
D/bluetoothd( 1072):
external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
Adding record with handle 0x10001
D/bluetoothd( 1072):
external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
Record pattern UUID 00001002-0000-1000-8000-00805f9
D/bluetoothd( 1072):
external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
Record pattern UUID 0000113a-0000-1000-8000-00805f9
D/bluetoothd( 1072):
external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
Record pattern UUID 0000113b-0000-1000-8000-00805f9
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e
I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c
........
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00
............
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011
I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00
00 00 00 ................
I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00
......
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00
............
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034
I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00
4............
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00
00 00 00 ......4.........
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018
I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01
.......
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00
.........
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028
I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c
05 (.......k.G...
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00
......(..
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
80 00 10 ......?4._......
I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00
.......
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
............
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
80 00 10 ......?4._......
I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00
..;....
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
............
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013
I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00
........
I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c
.........
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c
I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c)
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030
I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00
0.......
I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c
......0..
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c
I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c)
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012
I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00
.........
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00
.........
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00
D/bluetoothd( 1072):
external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete()
status 0
I/bluetoothd( 1072): Adapter initialized
D/bluetoothd( 1072): external/bluetooth/bluez/android/ipc.c:cmd_connect_cb()
E/bluetoothd( 1072): IPC: command socket connect failed
I/bluetoothd( 1072): Switching controller off
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005
I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00
.......
I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00
.............
I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00
D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:cleanup_services()
I/bluetoothd( 1072): Stopping SDP server
I/bluetoothd( 1072): Exit
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: android-bluez with usb adapter 2015-02-17 21:16 android-bluez with usb adapter Keith Conger @ 2015-02-17 21:47 ` Szymon Janc [not found] ` <CALUN+EcJ4p4kkFDZDyi01iSAwDMv4M1Q=axAPiCb+YOAQ64CNQ@mail.gmail.com> 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-17 21:47 UTC (permalink / raw) To: Keith Conger; +Cc: linux-bluetooth Hi Keith, On Tuesday 17 February 2015 14:16:37 Keith Conger wrote: > I'm trying to swap out bluedroid with android-bluez to add bluetooth > usb adapter support into KitKat for my Beaglebone Black(ARM). Should > this be possible? Yeap, this is possible. > > I followed this guide, > http://forum.xda-developers.com/showthread.php?t=2640723 skipping the > CSR parts. > > Here is a logcat with debugging enabled. I've googled the errors and > have had no luck. Does anyone have any ideas? > > I/bluetoothd( 1072): Bluetooth daemon 5.28 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff: > 0x3400, perm: 0x3400, inh: 0x0 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start() > index -1 > > I/bluetoothd( 1072): Starting SDP server > > D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main() > Entering main loop > > I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 > > I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00 > ..??.. > > I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00 > ..??........ > > I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:read_version_complete() > > I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized > > I/bluetoothd( 1072): Kernel connection control will be used > > I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 > > I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00 > ..??.. > > I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00 > ..??......... > > I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() > Number of controllers: 1 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 > > I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00 > ...... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7 > 18 00 03 .........?66?... > > I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00 > 42 43 4d ..?..........BCM > > I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00 > 00 00 00 2045B3.......... > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 > . > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:read_info_complete() > > D/bluetoothd( 1072): > external/bluetooth/bluez/src/sdpd-service.c:register_device_id() > Adding device id record for 0002:1d6b:0247:051c > > D/bluetoothd( 1072): > external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > Adding record with handle 0x10001 > > D/bluetoothd( 1072): > external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > Record pattern UUID 00001002-0000-1000-8000-00805f9 > > D/bluetoothd( 1072): > external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > Record pattern UUID 0000113a-0000-1000-8000-00805f9 > > D/bluetoothd( 1072): > external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > Record pattern UUID 0000113b-0000-1000-8000-00805f9 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e > > I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c > ........ > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00 > ............ > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 > > I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00 > 00 00 00 ................ > > I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 > ...... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00 > ............ > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 > > I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00 > 4............ > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00 > 00 00 00 ......4......... > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 > > I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01 > ....... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00 > ......... > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 > > I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c > 05 (.......k.G... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00 > ......(.. > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 > > I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 > 80 00 10 ......?4._...... > > I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00 > ....... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 > ............ > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 > > I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 > 80 00 10 ......?4._...... > > I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00 > ..;.... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 > ............ > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013 > > I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00 > ........ > > I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c > ......... > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c > > I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c) > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030 > > I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00 > 0....... > > I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c > ......0.. > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c > > I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c) > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 > > I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00 > ......... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00 > ......... > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete() > status 0 > > I/bluetoothd( 1072): Adapter initialized > > D/bluetoothd( 1072): external/bluetooth/bluez/android/ipc.c:cmd_connect_cb() > > E/bluetoothd( 1072): IPC: command socket connect failed > > I/bluetoothd( 1072): Switching controller off > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 > > I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00 > ....... > > I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00 > ............. > > I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00 > > D/bluetoothd( 1072): > external/bluetooth/bluez/android/main.c:cleanup_services() > > I/bluetoothd( 1072): Stopping SDP server > > I/bluetoothd( 1072): Exit This log looks OK. Adapter was found and initialized. Only problem is that there was no IPC socket listening for it to connect. On Android bluetoothd is not suppose to be started 'by hand'. It needs to be started as service defined in init.rc (check android/README and android/init.bluetooth.rc). This service is started via bluetooth.default.so provided by BlueZ (this is implementation ofn Android Bluetooth HAL interface). When bluetoothd starts and initializes adapter it tries to connect IPC to this library. If lib is not loaded (and there is no socket to connect to) bluetoothd shuts down. This library is loaded by Android Framework and when you enable BT from UI lib will be initialized and daemon will be started. Other option for testing is our test tool called haltest. This is command line tool that will load bt lib and allow you to play with bt stack (this tool doesn't use Android Framework). So what you should check: - you have init.bluetooth.rc in / - this file is included from your board init.foo.rc file - daemon and bluetooth.default.so are installed on system (this should be handled just fine by Android.mk provided by BlueZ) - you don't need hciattach service - this is not needed with btusb -- Szymon K. Janc szymon.janc@gmail.com ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <CALUN+EcJ4p4kkFDZDyi01iSAwDMv4M1Q=axAPiCb+YOAQ64CNQ@mail.gmail.com>]
* Re: android-bluez with usb adapter [not found] ` <CALUN+EcJ4p4kkFDZDyi01iSAwDMv4M1Q=axAPiCb+YOAQ64CNQ@mail.gmail.com> @ 2015-02-18 7:34 ` Szymon Janc 2015-02-18 16:01 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-18 7:34 UTC (permalink / raw) To: Keith Conger; +Cc: 'BlueZ development' Hi Keith, (lets keep mailing list in CC) On Tuesday 17 February 2015 15:00:02 Keith Conger wrote: > Thanks for getting back to me. I did skip the hciattach part and I > have verified /system/lib/bluetooth.default.so exists. When enabling > via the UI I just see the following in the log: bluetooth.default.so should be in /system/lib/hw/ This lib is loaded via hw_get_module(). (I'm not sure why this wasn't installed there - it should if you used our Android.mk) > > E/BluetoothAdapter( 1109): Bluetooth binder is null > E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this > device > > I have attached a zip of my init scripts I'm using, I'm I missing anything? I'd make it a bit simpler: - load modules directly from init.rc on boot - remove this init.genericam33x.bt.rc file. this magic is not needed with btusb, also bluetoothd will power up device on start and power down on shutdown. - remove init.bt.sh (not needed if you load module on init) - import init.bluetooth.rc directly from you init.fooboard.rc file > Thanks again for your help! > Keith > > On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <szymon.janc@gmail.com> wrote: > > Hi Keith, > > > > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote: > >> I'm trying to swap out bluedroid with android-bluez to add bluetooth > >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should > >> this be possible? > > > > Yeap, this is possible. > > > >> I followed this guide, > >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the > >> CSR parts. > >> > >> Here is a logcat with debugging enabled. I've googled the errors and > >> have had no luck. Does anyone have any ideas? > >> > >> I/bluetoothd( 1072): Bluetooth daemon 5.28 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff: > >> 0x3400, perm: 0x3400, inh: 0x0 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start() > >> index -1 > >> > >> I/bluetoothd( 1072): Starting SDP server > >> > >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main() > >> Entering main loop > >> > >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 > >> > >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00 > >> > >> ..??.. > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00 > >> > >> ..??........ > >> > >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete() > >> > >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized > >> > >> I/bluetoothd( 1072): Kernel connection control will be used > >> > >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 > >> > >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00 > >> > >> ..??.. > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00 > >> > >> ..??......... > >> > >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() > >> Number of controllers: 1 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 > >> > >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00 > >> > >> ...... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7 > >> 18 00 03 .........?66?... > >> > >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00 > >> 42 43 4d ..?..........BCM > >> > >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00 > >> 00 00 00 2045B3.......... > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 > >> > >> . > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete() > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id() > >> Adding device id record for 0002:1d6b:0247:051c > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > >> Adding record with handle 0x10001 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > >> Record pattern UUID 00001002-0000-1000-8000-00805f9 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > >> Record pattern UUID 0000113a-0000-1000-8000-00805f9 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() > >> Record pattern UUID 0000113b-0000-1000-8000-00805f9 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e > >> > >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c > >> > >> ........ > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00 > >> > >> ............ > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 > >> > >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00 > >> 00 00 00 ................ > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 > >> > >> ...... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00 > >> > >> ............ > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 > >> > >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00 > >> > >> 4............ > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00 > >> 00 00 00 ......4......... > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 > >> > >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01 > >> > >> ....... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00 > >> > >> ......... > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 > >> > >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c > >> 05 (.......k.G... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00 > >> > >> ......(.. > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 > >> > >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 > >> 80 00 10 ......?4._...... > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00 > >> > >> ....... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 > >> > >> ............ > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 > >> > >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 > >> 80 00 10 ......?4._...... > >> > >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00 > >> > >> ..;.... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 > >> > >> ............ > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013 > >> > >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00 > >> > >> ........ > >> > >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c > >> > >> ......... > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c > >> > >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c) > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030 > >> > >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00 > >> > >> 0....... > >> > >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c > >> > >> ......0.. > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c > >> > >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c) > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 > >> > >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00 > >> > >> ......... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00 > >> > >> ......... > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete() > >> status 0 > >> > >> I/bluetoothd( 1072): Adapter initialized > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb() > >> > >> E/bluetoothd( 1072): IPC: command socket connect failed > >> > >> I/bluetoothd( 1072): Switching controller off > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 > >> > >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00 > >> > >> ....... > >> > >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00 > >> > >> ............. > >> > >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00 > >> > >> D/bluetoothd( 1072): > >> external/bluetooth/bluez/android/main.c:cleanup_services() > >> > >> I/bluetoothd( 1072): Stopping SDP server > >> > >> I/bluetoothd( 1072): Exit > > > > This log looks OK. Adapter was found and initialized. Only problem is that > > there was no IPC socket listening for it to connect. > > > > On Android bluetoothd is not suppose to be started 'by hand'. It needs to > > be started as service defined in init.rc (check android/README and > > android/init.bluetooth.rc). This service is started via > > bluetooth.default.so provided by BlueZ (this is implementation ofn > > Android Bluetooth HAL interface). When bluetoothd starts and initializes > > adapter it tries to connect IPC to this library. If lib is not loaded > > (and there is no socket to connect to) bluetoothd shuts down. > > > > This library is loaded by Android Framework and when you enable BT from UI > > lib will be initialized and daemon will be started. Other option for > > testing is our test tool called haltest. This is command line tool that > > will load bt lib and allow you to play with bt stack (this tool doesn't > > use Android Framework).> > > So what you should check: > > - you have init.bluetooth.rc in / > > - this file is included from your board init.foo.rc file > > - daemon and bluetooth.default.so are installed on system (this should be > > > > handled just fine by Android.mk provided by BlueZ) > > > > - you don't need hciattach service - this is not needed with btusb > > > > -- > > Szymon K. Janc > > szymon.janc@gmail.com -- Szymon K. Janc szymon.janc@gmail.com ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-18 7:34 ` Szymon Janc @ 2015-02-18 16:01 ` Keith Conger 2015-02-18 18:41 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-18 16:01 UTC (permalink / raw) To: Szymon Janc; +Cc: BlueZ development Sorry, about forgetting to reply-all. I'll give your suggestions a try and report back. Thanks for the help, Keith On Wed, Feb 18, 2015 at 12:34 AM, Szymon Janc <szymon.janc@gmail.com> wrote: > Hi Keith, > > (lets keep mailing list in CC) > > On Tuesday 17 February 2015 15:00:02 Keith Conger wrote: >> Thanks for getting back to me. I did skip the hciattach part and I >> have verified /system/lib/bluetooth.default.so exists. When enabling >> via the UI I just see the following in the log: > > bluetooth.default.so should be in /system/lib/hw/ > > This lib is loaded via hw_get_module(). > (I'm not sure why this wasn't installed there - it should if you used our > Android.mk) > >> >> E/BluetoothAdapter( 1109): Bluetooth binder is null >> E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this >> device >> >> I have attached a zip of my init scripts I'm using, I'm I missing anything? > > I'd make it a bit simpler: > - load modules directly from init.rc on boot > - remove this init.genericam33x.bt.rc file. > this magic is not needed with btusb, also bluetoothd will power up device on > start and power down on shutdown. > - remove init.bt.sh (not needed if you load module on init) > - import init.bluetooth.rc directly from you init.fooboard.rc file > >> Thanks again for your help! >> Keith >> >> On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <szymon.janc@gmail.com> wrote: >> > Hi Keith, >> > >> > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote: >> >> I'm trying to swap out bluedroid with android-bluez to add bluetooth >> >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should >> >> this be possible? >> > >> > Yeap, this is possible. >> > >> >> I followed this guide, >> >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the >> >> CSR parts. >> >> >> >> Here is a logcat with debugging enabled. I've googled the errors and >> >> have had no luck. Does anyone have any ideas? >> >> >> >> I/bluetoothd( 1072): Bluetooth daemon 5.28 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff: >> >> 0x3400, perm: 0x3400, inh: 0x0 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start() >> >> index -1 >> >> >> >> I/bluetoothd( 1072): Starting SDP server >> >> >> >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main() >> >> Entering main loop >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00 >> >> >> >> ..??.. >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00 >> >> >> >> ..??........ >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete() >> >> >> >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized >> >> >> >> I/bluetoothd( 1072): Kernel connection control will be used >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00 >> >> >> >> ..??.. >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00 >> >> >> >> ..??......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() >> >> Number of controllers: 1 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00 >> >> >> >> ...... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7 >> >> 18 00 03 .........?66?... >> >> >> >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00 >> >> 42 43 4d ..?..........BCM >> >> >> >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00 >> >> 00 00 00 2045B3.......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 >> >> >> >> . >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete() >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id() >> >> Adding device id record for 0002:1d6b:0247:051c >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >> >> Adding record with handle 0x10001 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >> >> Record pattern UUID 00001002-0000-1000-8000-00805f9 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >> >> Record pattern UUID 0000113a-0000-1000-8000-00805f9 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >> >> Record pattern UUID 0000113b-0000-1000-8000-00805f9 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c >> >> >> >> ........ >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00 >> >> >> >> ............ >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00 >> >> 00 00 00 ................ >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 >> >> >> >> ...... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00 >> >> >> >> ............ >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00 >> >> >> >> 4............ >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00 >> >> 00 00 00 ......4......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01 >> >> >> >> ....... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00 >> >> >> >> ......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c >> >> 05 (.......k.G... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00 >> >> >> >> ......(.. >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 >> >> 80 00 10 ......?4._...... >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00 >> >> >> >> ....... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 >> >> >> >> ............ >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 >> >> 80 00 10 ......?4._...... >> >> >> >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00 >> >> >> >> ..;.... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 >> >> >> >> ............ >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00 >> >> >> >> ........ >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c >> >> >> >> ......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c >> >> >> >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c) >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00 >> >> >> >> 0....... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c >> >> >> >> ......0.. >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c >> >> >> >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c) >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00 >> >> >> >> ......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00 >> >> >> >> ......... >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete() >> >> status 0 >> >> >> >> I/bluetoothd( 1072): Adapter initialized >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb() >> >> >> >> E/bluetoothd( 1072): IPC: command socket connect failed >> >> >> >> I/bluetoothd( 1072): Switching controller off >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 >> >> >> >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00 >> >> >> >> ....... >> >> >> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00 >> >> >> >> ............. >> >> >> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00 >> >> >> >> D/bluetoothd( 1072): >> >> external/bluetooth/bluez/android/main.c:cleanup_services() >> >> >> >> I/bluetoothd( 1072): Stopping SDP server >> >> >> >> I/bluetoothd( 1072): Exit >> > >> > This log looks OK. Adapter was found and initialized. Only problem is that >> > there was no IPC socket listening for it to connect. >> > >> > On Android bluetoothd is not suppose to be started 'by hand'. It needs to >> > be started as service defined in init.rc (check android/README and >> > android/init.bluetooth.rc). This service is started via >> > bluetooth.default.so provided by BlueZ (this is implementation ofn >> > Android Bluetooth HAL interface). When bluetoothd starts and initializes >> > adapter it tries to connect IPC to this library. If lib is not loaded >> > (and there is no socket to connect to) bluetoothd shuts down. >> > >> > This library is loaded by Android Framework and when you enable BT from UI >> > lib will be initialized and daemon will be started. Other option for >> > testing is our test tool called haltest. This is command line tool that >> > will load bt lib and allow you to play with bt stack (this tool doesn't >> > use Android Framework).> >> > So what you should check: >> > - you have init.bluetooth.rc in / >> > - this file is included from your board init.foo.rc file >> > - daemon and bluetooth.default.so are installed on system (this should be >> > >> > handled just fine by Android.mk provided by BlueZ) >> > >> > - you don't need hciattach service - this is not needed with btusb >> > >> > -- >> > Szymon K. Janc >> > szymon.janc@gmail.com > > -- > Szymon K. Janc > szymon.janc@gmail.com -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-18 16:01 ` Keith Conger @ 2015-02-18 18:41 ` Keith Conger 2015-02-18 19:52 ` Szymon Janc 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-18 18:41 UTC (permalink / raw) To: Szymon Janc; +Cc: BlueZ development Ok, things are looking somewhat better. It doesn't seem to work in the UI. But haltest looks good I think. Here is a logcat from boot to me enable Bluetooth and looking for devices: ########## Start Logcat ########## adb logcat|grep -i blue - waiting for device - W/PackageParser( 595): No actions in intent filter at /system/app/Bluetooth.apk Binary XML file line #211 W/PackageManager( 595): Unknown permission com.google.android.gallery3d.permission.GALLERY_PROVIDER in package com.android.bluetooth W/PackageManager( 595): Unknown permission android.permission.MMS_SEND_OUTBOX_MSG in package com.android.bluetooth I/SystemServer( 595): No Bluetooh Service (emulator) W/PackageManager( 595): Unknown permission com.google.android.gallery3d.permission.GALLERY_PROVIDER in package com.android.bluetooth W/PackageManager( 595): Unknown permission android.permission.MMS_SEND_OUTBOX_MSG in package com.android.bluetooth E/BluetoothAdapter( 727): Bluetooth binder is null E/BluetoothAdapter( 727): Bluetooth binder is null E/BluetoothAdapter( 654): Bluetooth binder is null E/BluetoothAdapter( 654): Bluetooth binder is null E/BluetoothAdapter( 727): Bluetooth binder is null E/BluetoothAdapter( 654): Bluetooth binder is null E/BluetoothAdapter( 654): Bluetooth binder is null E/BluetoothAdapter( 654): Bluetooth binder is null E/BluetoothAdapter( 717): Bluetooth binder is null E/BluetoothAdapter( 717): Bluetooth binder is null E/BluetoothAdapter( 595): Bluetooth binder is null E/BluetoothAdapter( 595): Bluetooth binder is null E/BluetoothAdapter( 717): Bluetooth binder is null D/SubSettings( 717): Launching fragment com.android.settings.bluetooth.BluetoothSettings E/BluetoothAdapter( 717): Bluetooth binder is null E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this device ########## END Logcat ########## With haltest, it appears to work fine: ########## Start haltest session ########## root@beagleboneblack:/ # haltest hw_get_module_by_class returned -2 hw_get_module_by_class returned -2 thread_evt_cb: evt=ASSOCIATE_JVM if_bluetooth->init: BT_STATUS_SUCCESS get_profile_interface(handsfree) : 0xb6e2a134 get_profile_interface(a2dp) : 0xb6e2a0ec get_profile_interface(avrcp) : 0xb6e2a100 get_profile_interface(health) : 0xb6e2a3d0 get_profile_interface(hidhost) : 0xb6e2a0a0 get_profile_interface(pan) : 0xb6e2a0d0 get_profile_interface(gatt) : 0xb6e2a1ac get_profile_interface(socket) : 0xb6e2a094 if_av->init: BT_STATUS_SUCCESS if_rc->init: BT_STATUS_SUCCESS adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, 0000113b, 00001200} if_gatt->init: BT_STATUS_FAIL adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, 0000113b, 00001200} adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, 0000113b, 00001200} if_hf->init: BT_STATUS_SUCCESS adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} if_hh->init: BT_STATUS_SUCCESS if_pan->init: BT_STATUS_SUCCESS adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} if_hl->init: BT_STATUS_SUCCESS > bluetooth init if_bluetooth->init: BT_STATUS_DONE > bluetooth enable adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9 prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9 prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000 prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120 prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={} prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} prop: type=(unknown) len=8 val=0xb6e1da5d if_bluetooth->enable: BT_STATUS_SUCCESS adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c adapter_state_changed_cb: state=BT_STATE_ON > bluetooth start_discovery if_bluetooth->start_discovery: BT_STATUS_SUCCESS discovery_state_changed_cb: state=BT_DISCOVERY_STARTED device_found_cb: num_properties=5 prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48 prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216 prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48 remote_device_properties_cb: status=BT_STATUS_SUCCESS bd_addr=ec:88:92:c3:1e:48 num_properties=1 prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6 discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED ########## End haltest session ########## On Wed, Feb 18, 2015 at 9:01 AM, Keith Conger <keith.conger@gmail.com> wrote: > Sorry, about forgetting to reply-all. > > I'll give your suggestions a try and report back. > > Thanks for the help, > Keith > > On Wed, Feb 18, 2015 at 12:34 AM, Szymon Janc <szymon.janc@gmail.com> wrote: >> Hi Keith, >> >> (lets keep mailing list in CC) >> >> On Tuesday 17 February 2015 15:00:02 Keith Conger wrote: >>> Thanks for getting back to me. I did skip the hciattach part and I >>> have verified /system/lib/bluetooth.default.so exists. When enabling >>> via the UI I just see the following in the log: >> >> bluetooth.default.so should be in /system/lib/hw/ >> >> This lib is loaded via hw_get_module(). >> (I'm not sure why this wasn't installed there - it should if you used our >> Android.mk) >> >>> >>> E/BluetoothAdapter( 1109): Bluetooth binder is null >>> E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this >>> device >>> >>> I have attached a zip of my init scripts I'm using, I'm I missing anything? >> >> I'd make it a bit simpler: >> - load modules directly from init.rc on boot >> - remove this init.genericam33x.bt.rc file. >> this magic is not needed with btusb, also bluetoothd will power up device on >> start and power down on shutdown. >> - remove init.bt.sh (not needed if you load module on init) >> - import init.bluetooth.rc directly from you init.fooboard.rc file >> >>> Thanks again for your help! >>> Keith >>> >>> On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <szymon.janc@gmail.com> wrote: >>> > Hi Keith, >>> > >>> > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote: >>> >> I'm trying to swap out bluedroid with android-bluez to add bluetooth >>> >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should >>> >> this be possible? >>> > >>> > Yeap, this is possible. >>> > >>> >> I followed this guide, >>> >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the >>> >> CSR parts. >>> >> >>> >> Here is a logcat with debugging enabled. I've googled the errors and >>> >> have had no luck. Does anyone have any ideas? >>> >> >>> >> I/bluetoothd( 1072): Bluetooth daemon 5.28 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff: >>> >> 0x3400, perm: 0x3400, inh: 0x0 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start() >>> >> index -1 >>> >> >>> >> I/bluetoothd( 1072): Starting SDP server >>> >> >>> >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main() >>> >> Entering main loop >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00 >>> >> >>> >> ..??.. >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00 >>> >> >>> >> ..??........ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete() >>> >> >>> >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized >>> >> >>> >> I/bluetoothd( 1072): Kernel connection control will be used >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00 >>> >> >>> >> ..??.. >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00 >>> >> >>> >> ..??......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete() >>> >> Number of controllers: 1 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00 >>> >> >>> >> ...... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7 >>> >> 18 00 03 .........?66?... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00 >>> >> 42 43 4d ..?..........BCM >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00 >>> >> 00 00 00 2045B3.......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 >>> >> >>> >> . >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete() >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id() >>> >> Adding device id record for 0002:1d6b:0247:051c >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >>> >> Adding record with handle 0x10001 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >>> >> Record pattern UUID 00001002-0000-1000-8000-00805f9 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >>> >> Record pattern UUID 0000113a-0000-1000-8000-00805f9 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server() >>> >> Record pattern UUID 0000113b-0000-1000-8000-00805f9 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c >>> >> >>> >> ........ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00 >>> >> >>> >> ............ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00 >>> >> 00 00 00 ................ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 >>> >> >>> >> ...... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00 >>> >> >>> >> ............ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00 >>> >> >>> >> 4............ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00 >>> >> 00 00 00 ......4......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01 >>> >> >>> >> ....... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00 >>> >> >>> >> ......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c >>> >> 05 (.......k.G... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00 >>> >> >>> >> ......(.. >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 >>> >> 80 00 10 ......?4._...... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00 >>> >> >>> >> ....... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 >>> >> >>> >> ............ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00 >>> >> 80 00 10 ......?4._...... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00 >>> >> >>> >> ..;.... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00 >>> >> >>> >> ............ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00 >>> >> >>> >> ........ >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c >>> >> >>> >> ......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c >>> >> >>> >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c) >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00 >>> >> >>> >> 0....... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c >>> >> >>> >> ......0.. >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c >>> >> >>> >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c) >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00 >>> >> >>> >> ......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00 >>> >> >>> >> ......... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete() >>> >> status 0 >>> >> >>> >> I/bluetoothd( 1072): Adapter initialized >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb() >>> >> >>> >> E/bluetoothd( 1072): IPC: command socket connect failed >>> >> >>> >> I/bluetoothd( 1072): Switching controller off >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00 >>> >> >>> >> ....... >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00 >>> >> >>> >> ............. >>> >> >>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00 >>> >> >>> >> D/bluetoothd( 1072): >>> >> external/bluetooth/bluez/android/main.c:cleanup_services() >>> >> >>> >> I/bluetoothd( 1072): Stopping SDP server >>> >> >>> >> I/bluetoothd( 1072): Exit >>> > >>> > This log looks OK. Adapter was found and initialized. Only problem is that >>> > there was no IPC socket listening for it to connect. >>> > >>> > On Android bluetoothd is not suppose to be started 'by hand'. It needs to >>> > be started as service defined in init.rc (check android/README and >>> > android/init.bluetooth.rc). This service is started via >>> > bluetooth.default.so provided by BlueZ (this is implementation ofn >>> > Android Bluetooth HAL interface). When bluetoothd starts and initializes >>> > adapter it tries to connect IPC to this library. If lib is not loaded >>> > (and there is no socket to connect to) bluetoothd shuts down. >>> > >>> > This library is loaded by Android Framework and when you enable BT from UI >>> > lib will be initialized and daemon will be started. Other option for >>> > testing is our test tool called haltest. This is command line tool that >>> > will load bt lib and allow you to play with bt stack (this tool doesn't >>> > use Android Framework).> >>> > So what you should check: >>> > - you have init.bluetooth.rc in / >>> > - this file is included from your board init.foo.rc file >>> > - daemon and bluetooth.default.so are installed on system (this should be >>> > >>> > handled just fine by Android.mk provided by BlueZ) >>> > >>> > - you don't need hciattach service - this is not needed with btusb >>> > >>> > -- >>> > Szymon K. Janc >>> > szymon.janc@gmail.com >> >> -- >> Szymon K. Janc >> szymon.janc@gmail.com > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-18 18:41 ` Keith Conger @ 2015-02-18 19:52 ` Szymon Janc 2015-02-18 19:57 ` Szymon Janc 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-18 19:52 UTC (permalink / raw) To: Keith Conger; +Cc: Szymon Janc, BlueZ development Hi Keith, On Wednesday 18 of February 2015 11:41:01 Keith Conger wrote: > Ok, things are looking somewhat better. > > It doesn't seem to work in the UI. But haltest looks good I think. > > Here is a logcat from boot to me enable Bluetooth and looking for devices: > > ########## Start Logcat ########## > > adb logcat|grep -i blue > > - waiting for device - > > W/PackageParser( 595): No actions in intent filter at > /system/app/Bluetooth.apk Binary XML file line #211 > > W/PackageManager( 595): Unknown permission > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package > com.android.bluetooth > > W/PackageManager( 595): Unknown permission > android.permission.MMS_SEND_OUTBOX_MSG in package > com.android.bluetooth > > I/SystemServer( 595): No Bluetooh Service (emulator) > > W/PackageManager( 595): Unknown permission > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package > com.android.bluetooth > > W/PackageManager( 595): Unknown permission > android.permission.MMS_SEND_OUTBOX_MSG in package > com.android.bluetooth > > E/BluetoothAdapter( 727): Bluetooth binder is null > > E/BluetoothAdapter( 727): Bluetooth binder is null > > E/BluetoothAdapter( 654): Bluetooth binder is null > > E/BluetoothAdapter( 654): Bluetooth binder is null > > E/BluetoothAdapter( 727): Bluetooth binder is null > > E/BluetoothAdapter( 654): Bluetooth binder is null > > E/BluetoothAdapter( 654): Bluetooth binder is null > > E/BluetoothAdapter( 654): Bluetooth binder is null > > E/BluetoothAdapter( 717): Bluetooth binder is null > > E/BluetoothAdapter( 717): Bluetooth binder is null > > E/BluetoothAdapter( 595): Bluetooth binder is null > > E/BluetoothAdapter( 595): Bluetooth binder is null > > E/BluetoothAdapter( 717): Bluetooth binder is null > > D/SubSettings( 717): Launching fragment > com.android.settings.bluetooth.BluetoothSettings > > E/BluetoothAdapter( 717): Bluetooth binder is null > > E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this > device > > ########## END Logcat ########## > > > > > > With haltest, it appears to work fine: > > > ########## Start haltest session ########## > root@beagleboneblack:/ # haltest > > hw_get_module_by_class returned -2 > > hw_get_module_by_class returned -2 > > thread_evt_cb: evt=ASSOCIATE_JVM > > if_bluetooth->init: BT_STATUS_SUCCESS > > get_profile_interface(handsfree) : 0xb6e2a134 > > get_profile_interface(a2dp) : 0xb6e2a0ec > > get_profile_interface(avrcp) : 0xb6e2a100 > > get_profile_interface(health) : 0xb6e2a3d0 > > get_profile_interface(hidhost) : 0xb6e2a0a0 > > get_profile_interface(pan) : 0xb6e2a0d0 > > get_profile_interface(gatt) : 0xb6e2a1ac > > get_profile_interface(socket) : 0xb6e2a094 > > if_av->init: BT_STATUS_SUCCESS > > if_rc->init: BT_STATUS_SUCCESS > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > 0000113b, 00001200} > > if_gatt->init: BT_STATUS_FAIL > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > 0000113b, 00001200} > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > 0000113b, 00001200} > > if_hf->init: BT_STATUS_SUCCESS > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c, > 0000110a, 0000113b, 00001200} > > if_hh->init: BT_STATUS_SUCCESS > > if_pan->init: BT_STATUS_SUCCESS > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > if_hl->init: BT_STATUS_SUCCESS > > > bluetooth init > > if_bluetooth->init: BT_STATUS_DONE > > > bluetooth enable > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9 > > prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9 > > prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000 > > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR > > prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE > > prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120 > > prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={} > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > prop: type=(unknown) len=8 val=0xb6e1da5d > > if_bluetooth->enable: BT_STATUS_SUCCESS > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c > > adapter_state_changed_cb: state=BT_STATE_ON > > > bluetooth start_discovery > > if_bluetooth->start_discovery: BT_STATUS_SUCCESS > > discovery_state_changed_cb: state=BT_DISCOVERY_STARTED > > device_found_cb: num_properties=5 > > prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48 > > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c > > prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216 > > prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48 > > remote_device_properties_cb: status=BT_STATUS_SUCCESS > bd_addr=ec:88:92:c3:1e:48 num_properties=1 > > prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6 > > discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED > > ########## End haltest session ########## This looks OK. You just need to reboot your board and UI should also be working. This is due to Android doing test BT start while booting and if that failed it won't try to load BT HAL again. Also note that you cannot run BT from UI and haltest at the same. -- BR Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-18 19:52 ` Szymon Janc @ 2015-02-18 19:57 ` Szymon Janc [not found] ` <CALUN+EcsmogUt4PU-sSM4peusX4gdnmAF=ou1ouj5y-QPSpq3Q@mail.gmail.com> 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-18 19:57 UTC (permalink / raw) To: Keith Conger; +Cc: Szymon Janc, BlueZ development On Wednesday 18 of February 2015 20:52:06 Szymon Janc wrote: > Hi Keith, > > On Wednesday 18 of February 2015 11:41:01 Keith Conger wrote: > > Ok, things are looking somewhat better. > > > > It doesn't seem to work in the UI. But haltest looks good I think. > > > > Here is a logcat from boot to me enable Bluetooth and looking for devices: > > > > ########## Start Logcat ########## > > > > adb logcat|grep -i blue > > > > - waiting for device - > > > > W/PackageParser( 595): No actions in intent filter at > > /system/app/Bluetooth.apk Binary XML file line #211 > > > > W/PackageManager( 595): Unknown permission > > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package > > com.android.bluetooth > > > > W/PackageManager( 595): Unknown permission > > android.permission.MMS_SEND_OUTBOX_MSG in package > > com.android.bluetooth > > > > I/SystemServer( 595): No Bluetooh Service (emulator) > > > > W/PackageManager( 595): Unknown permission > > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package > > com.android.bluetooth > > > > W/PackageManager( 595): Unknown permission > > android.permission.MMS_SEND_OUTBOX_MSG in package > > com.android.bluetooth > > > > E/BluetoothAdapter( 727): Bluetooth binder is null > > > > E/BluetoothAdapter( 727): Bluetooth binder is null > > > > E/BluetoothAdapter( 654): Bluetooth binder is null > > > > E/BluetoothAdapter( 654): Bluetooth binder is null > > > > E/BluetoothAdapter( 727): Bluetooth binder is null > > > > E/BluetoothAdapter( 654): Bluetooth binder is null > > > > E/BluetoothAdapter( 654): Bluetooth binder is null > > > > E/BluetoothAdapter( 654): Bluetooth binder is null > > > > E/BluetoothAdapter( 717): Bluetooth binder is null > > > > E/BluetoothAdapter( 717): Bluetooth binder is null > > > > E/BluetoothAdapter( 595): Bluetooth binder is null > > > > E/BluetoothAdapter( 595): Bluetooth binder is null > > > > E/BluetoothAdapter( 717): Bluetooth binder is null > > > > D/SubSettings( 717): Launching fragment > > com.android.settings.bluetooth.BluetoothSettings > > > > E/BluetoothAdapter( 717): Bluetooth binder is null > > > > E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this > > device > > > > ########## END Logcat ########## > > > > > > > > > > > > With haltest, it appears to work fine: > > > > > > ########## Start haltest session ########## > > root@beagleboneblack:/ # haltest > > > > hw_get_module_by_class returned -2 > > > > hw_get_module_by_class returned -2 > > > > thread_evt_cb: evt=ASSOCIATE_JVM > > > > if_bluetooth->init: BT_STATUS_SUCCESS > > > > get_profile_interface(handsfree) : 0xb6e2a134 > > > > get_profile_interface(a2dp) : 0xb6e2a0ec > > > > get_profile_interface(avrcp) : 0xb6e2a100 > > > > get_profile_interface(health) : 0xb6e2a3d0 > > > > get_profile_interface(hidhost) : 0xb6e2a0a0 > > > > get_profile_interface(pan) : 0xb6e2a0d0 > > > > get_profile_interface(gatt) : 0xb6e2a1ac > > > > get_profile_interface(socket) : 0xb6e2a094 > > > > if_av->init: BT_STATUS_SUCCESS > > > > if_rc->init: BT_STATUS_SUCCESS > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > > 0000113b, 00001200} > > > > if_gatt->init: BT_STATUS_FAIL > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > > 0000113b, 00001200} > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a, > > 0000113b, 00001200} > > > > if_hf->init: BT_STATUS_SUCCESS > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c, > > 0000110a, 0000113b, 00001200} > > > > if_hh->init: BT_STATUS_SUCCESS > > > > if_pan->init: BT_STATUS_SUCCESS > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > > > if_hl->init: BT_STATUS_SUCCESS > > > > > bluetooth init > > > > if_bluetooth->init: BT_STATUS_DONE > > > > > bluetooth enable > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9 > > > > prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9 > > > > prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black > > > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000 > > > > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR > > > > prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE > > > > prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120 > > > > prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={} > > > > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116, > > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200} > > > > prop: type=(unknown) len=8 val=0xb6e1da5d > > > > if_bluetooth->enable: BT_STATUS_SUCCESS > > > > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1 > > > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c > > > > adapter_state_changed_cb: state=BT_STATE_ON > > > > > bluetooth start_discovery > > > > if_bluetooth->start_discovery: BT_STATUS_SUCCESS > > > > discovery_state_changed_cb: state=BT_DISCOVERY_STARTED > > > > device_found_cb: num_properties=5 > > > > prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48 > > > > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR > > > > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c > > > > prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216 > > > > prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48 > > > > remote_device_properties_cb: status=BT_STATUS_SUCCESS > > bd_addr=ec:88:92:c3:1e:48 num_properties=1 > > > > prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6 > > > > discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED > > > > ########## End haltest session ########## > > This looks OK. You just need to reboot your board and UI should also be > working. > > This is due to Android doing test BT start while booting and if that failed > it won't try to load BT HAL again. > > Also note that you cannot run BT from UI and haltest at the same. I thing that might be affecting this test BT enable is that kernel modules are loaded too late in boot process. I recommend loading them in "on boot" target. See our reference tree: https://code.google.com/p/aosp-bluez/source/browse/init.mako.rc?repo=device-lge-mako#62 -- BR Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <CALUN+EcsmogUt4PU-sSM4peusX4gdnmAF=ou1ouj5y-QPSpq3Q@mail.gmail.com>]
* Re: android-bluez with usb adapter [not found] ` <CALUN+EcsmogUt4PU-sSM4peusX4gdnmAF=ou1ouj5y-QPSpq3Q@mail.gmail.com> @ 2015-02-18 20:37 ` Szymon Janc [not found] ` <CALUN+EfrG1o8VsTWjMxW7Y4NGe=-E3M_hz_618ToAG4QHwPZKA@mail.gmail.com> 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-18 20:37 UTC (permalink / raw) To: Keith Conger; +Cc: Szymon Janc, BlueZ development Hi Keith, On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: > Actually I had tried through the UI first and got the above logcat > messages. I then tried HAL test. > > Just for some additional background I'm running kernel 3.8.13 and > bluetooth modules from backports-3.18.1-1 If haltest is working that means kernel is configured properly. > I have them at the bottom of "on boot" in the init.rc. I have > attached my kernel config and init.rc. Could you attach full logcat starting from boot? It looks like you are also missing audio.a2dp.default.so (it shouldn't affect BT enable but is needed for music streaming over BT). > > I noticed in the mako example the following additional modules are > loaded, I'm guessing I should add them also? > insmod /system/lib/modules/rfcomm.ko > insmod /system/lib/modules/bnep.ko Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN (BT tethering). > > Thanks again for the help. > Keith > -- BR Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <CALUN+EfrG1o8VsTWjMxW7Y4NGe=-E3M_hz_618ToAG4QHwPZKA@mail.gmail.com>]
* Re: android-bluez with usb adapter [not found] ` <CALUN+EfrG1o8VsTWjMxW7Y4NGe=-E3M_hz_618ToAG4QHwPZKA@mail.gmail.com> @ 2015-02-19 15:39 ` Keith Conger 2015-02-19 16:02 ` Andrei Emeltchenko 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-19 15:39 UTC (permalink / raw) To: Szymon Janc; +Cc: Szymon Janc, BlueZ development Can't seem to figure out why audio.a2dp.default.so isn't being built. It seems almost like its not even trying to start bluetoothd. I wrapped it with strace, and it didn't create a trace log. On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: > Ok I added the additional kernel modules. > > Here is a logcat from boot to turning on bluetooth in the UI. > > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. > > Thanks, > Keith > > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: >> Hi Keith, >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: >>> Actually I had tried through the UI first and got the above logcat >>> messages. I then tried HAL test. >>> >>> Just for some additional background I'm running kernel 3.8.13 and >>> bluetooth modules from backports-3.18.1-1 >> >> If haltest is working that means kernel is configured properly. >> >>> I have them at the bottom of "on boot" in the init.rc. I have >>> attached my kernel config and init.rc. >> >> Could you attach full logcat starting from boot? >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect >> BT enable but is needed for music streaming over BT). >> >>> >>> I noticed in the mako example the following additional modules are >>> loaded, I'm guessing I should add them also? >>> insmod /system/lib/modules/rfcomm.ko >>> insmod /system/lib/modules/bnep.ko >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN >> (BT tethering). >> >>> >>> Thanks again for the help. >>> Keith >>> >> >> -- >> BR >> Szymon Janc > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 15:39 ` Keith Conger @ 2015-02-19 16:02 ` Andrei Emeltchenko 2015-02-19 16:06 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Andrei Emeltchenko @ 2015-02-19 16:02 UTC (permalink / raw) To: Keith Conger; +Cc: Szymon Janc, Szymon Janc, BlueZ development Hi Keith, On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: > Can't seem to figure out why audio.a2dp.default.so isn't being built. > This depends on your Android board configuration. afaik you can still build it locally with "mm" and copy to target adb sync should be enough Best regards Andrei Emeltchenko > It seems almost like its not even trying to start bluetoothd. I > wrapped it with strace, and it didn't create a trace log. > > On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: > > Ok I added the additional kernel modules. > > > > Here is a logcat from boot to turning on bluetooth in the UI. > > > > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. > > > > Thanks, > > Keith > > > > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: > >> Hi Keith, > >> > >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: > >>> Actually I had tried through the UI first and got the above logcat > >>> messages. I then tried HAL test. > >>> > >>> Just for some additional background I'm running kernel 3.8.13 and > >>> bluetooth modules from backports-3.18.1-1 > >> > >> If haltest is working that means kernel is configured properly. > >> > >>> I have them at the bottom of "on boot" in the init.rc. I have > >>> attached my kernel config and init.rc. > >> > >> Could you attach full logcat starting from boot? > >> > >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect > >> BT enable but is needed for music streaming over BT). > >> > >>> > >>> I noticed in the mako example the following additional modules are > >>> loaded, I'm guessing I should add them also? > >>> insmod /system/lib/modules/rfcomm.ko > >>> insmod /system/lib/modules/bnep.ko > >> > >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN > >> (BT tethering). > >> > >>> > >>> Thanks again for the help. > >>> Keith > >>> > >> > >> -- > >> BR > >> Szymon Janc > > > > > > > > -- > > Keith Conger > > keith DOT conger AT gmail DOT com > > http://thecongers.org > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 16:02 ` Andrei Emeltchenko @ 2015-02-19 16:06 ` Keith Conger 2015-02-19 16:08 ` Szymon Janc 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-19 16:06 UTC (permalink / raw) To: Andrei Emeltchenko, Keith Conger, Szymon Janc, Szymon Janc, BlueZ development Thanks I'll try that, do you know which BoardConfig option triggers its build? Eventually I'd like to send my work in getting Bluez in the bbbandroid repo to its maintainer. Thanks, Keith On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko <andrei.emeltchenko.news@gmail.com> wrote: > Hi Keith, > > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: >> Can't seem to figure out why audio.a2dp.default.so isn't being built. >> > > This depends on your Android board configuration. > > afaik you can still build it locally with "mm" and copy to target > > adb sync should be enough > > Best regards > Andrei Emeltchenko > > >> It seems almost like its not even trying to start bluetoothd. I >> wrapped it with strace, and it didn't create a trace log. >> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: >> > Ok I added the additional kernel modules. >> > >> > Here is a logcat from boot to turning on bluetooth in the UI. >> > >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. >> > >> > Thanks, >> > Keith >> > >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: >> >> Hi Keith, >> >> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: >> >>> Actually I had tried through the UI first and got the above logcat >> >>> messages. I then tried HAL test. >> >>> >> >>> Just for some additional background I'm running kernel 3.8.13 and >> >>> bluetooth modules from backports-3.18.1-1 >> >> >> >> If haltest is working that means kernel is configured properly. >> >> >> >>> I have them at the bottom of "on boot" in the init.rc. I have >> >>> attached my kernel config and init.rc. >> >> >> >> Could you attach full logcat starting from boot? >> >> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect >> >> BT enable but is needed for music streaming over BT). >> >> >> >>> >> >>> I noticed in the mako example the following additional modules are >> >>> loaded, I'm guessing I should add them also? >> >>> insmod /system/lib/modules/rfcomm.ko >> >>> insmod /system/lib/modules/bnep.ko >> >> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN >> >> (BT tethering). >> >> >> >>> >> >>> Thanks again for the help. >> >>> Keith >> >>> >> >> >> >> -- >> >> BR >> >> Szymon Janc >> > >> > >> > >> > -- >> > Keith Conger >> > keith DOT conger AT gmail DOT com >> > http://thecongers.org >> >> >> >> -- >> Keith Conger >> keith DOT conger AT gmail DOT com >> http://thecongers.org >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 16:06 ` Keith Conger @ 2015-02-19 16:08 ` Szymon Janc 2015-02-19 16:31 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-19 16:08 UTC (permalink / raw) To: Keith Conger; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development Hi Keith, On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: > Thanks I'll try that, do you know which BoardConfig option triggers > its build? Eventually I'd like to send my work in getting Bluez in the > bbbandroid repo to its maintainer. I think the problem with bt working from haltest but not from java is that this board of your is using kernel for emulator. This is from your logcat: I/SystemServer( 595): No Bluetooh Service (emulator) and check this for reference: http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 > > Thanks, > Keith > > On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko > <andrei.emeltchenko.news@gmail.com> wrote: > > Hi Keith, > > > > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: > >> Can't seem to figure out why audio.a2dp.default.so isn't being built. > >> > > > > This depends on your Android board configuration. > > > > afaik you can still build it locally with "mm" and copy to target > > > > adb sync should be enough > > > > Best regards > > Andrei Emeltchenko > > > > > >> It seems almost like its not even trying to start bluetoothd. I > >> wrapped it with strace, and it didn't create a trace log. > >> > >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: > >> > Ok I added the additional kernel modules. > >> > > >> > Here is a logcat from boot to turning on bluetooth in the UI. > >> > > >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. > >> > > >> > Thanks, > >> > Keith > >> > > >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: > >> >> Hi Keith, > >> >> > >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: > >> >>> Actually I had tried through the UI first and got the above logcat > >> >>> messages. I then tried HAL test. > >> >>> > >> >>> Just for some additional background I'm running kernel 3.8.13 and > >> >>> bluetooth modules from backports-3.18.1-1 > >> >> > >> >> If haltest is working that means kernel is configured properly. > >> >> > >> >>> I have them at the bottom of "on boot" in the init.rc. I have > >> >>> attached my kernel config and init.rc. > >> >> > >> >> Could you attach full logcat starting from boot? > >> >> > >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect > >> >> BT enable but is needed for music streaming over BT). > >> >> > >> >>> > >> >>> I noticed in the mako example the following additional modules are > >> >>> loaded, I'm guessing I should add them also? > >> >>> insmod /system/lib/modules/rfcomm.ko > >> >>> insmod /system/lib/modules/bnep.ko > >> >> > >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN > >> >> (BT tethering). > >> >> > >> >>> > >> >>> Thanks again for the help. > >> >>> Keith > >> >>> > >> >> > >> >> -- > >> >> BR > >> >> Szymon Janc > >> > > >> > > >> > > >> > -- > >> > Keith Conger > >> > keith DOT conger AT gmail DOT com > >> > http://thecongers.org > >> > >> > >> > >> -- > >> Keith Conger > >> keith DOT conger AT gmail DOT com > >> http://thecongers.org > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- Best regards, Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 16:08 ` Szymon Janc @ 2015-02-19 16:31 ` Keith Conger 2015-02-19 17:25 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-19 16:31 UTC (permalink / raw) To: Szymon Janc; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development Interesting, do you happen to know what I need to change in the kernel? Thanks again! Keith On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: > Hi Keith, > > On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: >> Thanks I'll try that, do you know which BoardConfig option triggers >> its build? Eventually I'd like to send my work in getting Bluez in the >> bbbandroid repo to its maintainer. > > I think the problem with bt working from haltest but not from java is that this > board of your is using kernel for emulator. > > > This is from your logcat: > I/SystemServer( 595): No Bluetooh Service (emulator) > > and check this for reference: > http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 > >> >> Thanks, >> Keith >> >> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko >> <andrei.emeltchenko.news@gmail.com> wrote: >> > Hi Keith, >> > >> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: >> >> Can't seem to figure out why audio.a2dp.default.so isn't being built. >> >> >> > >> > This depends on your Android board configuration. >> > >> > afaik you can still build it locally with "mm" and copy to target >> > >> > adb sync should be enough >> > >> > Best regards >> > Andrei Emeltchenko >> > >> > >> >> It seems almost like its not even trying to start bluetoothd. I >> >> wrapped it with strace, and it didn't create a trace log. >> >> >> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: >> >> > Ok I added the additional kernel modules. >> >> > >> >> > Here is a logcat from boot to turning on bluetooth in the UI. >> >> > >> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. >> >> > >> >> > Thanks, >> >> > Keith >> >> > >> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: >> >> >> Hi Keith, >> >> >> >> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: >> >> >>> Actually I had tried through the UI first and got the above logcat >> >> >>> messages. I then tried HAL test. >> >> >>> >> >> >>> Just for some additional background I'm running kernel 3.8.13 and >> >> >>> bluetooth modules from backports-3.18.1-1 >> >> >> >> >> >> If haltest is working that means kernel is configured properly. >> >> >> >> >> >>> I have them at the bottom of "on boot" in the init.rc. I have >> >> >>> attached my kernel config and init.rc. >> >> >> >> >> >> Could you attach full logcat starting from boot? >> >> >> >> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect >> >> >> BT enable but is needed for music streaming over BT). >> >> >> >> >> >>> >> >> >>> I noticed in the mako example the following additional modules are >> >> >>> loaded, I'm guessing I should add them also? >> >> >>> insmod /system/lib/modules/rfcomm.ko >> >> >>> insmod /system/lib/modules/bnep.ko >> >> >> >> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN >> >> >> (BT tethering). >> >> >> >> >> >>> >> >> >>> Thanks again for the help. >> >> >>> Keith >> >> >>> >> >> >> >> >> >> -- >> >> >> BR >> >> >> Szymon Janc >> >> > >> >> > >> >> > >> >> > -- >> >> > Keith Conger >> >> > keith DOT conger AT gmail DOT com >> >> > http://thecongers.org >> >> >> >> >> >> >> >> -- >> >> Keith Conger >> >> keith DOT conger AT gmail DOT com >> >> http://thecongers.org >> >> -- >> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in >> >> the body of a message to majordomo@vger.kernel.org >> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> > > -- > Best regards, > Szymon Janc -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 16:31 ` Keith Conger @ 2015-02-19 17:25 ` Keith Conger 2015-02-19 18:49 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-19 17:25 UTC (permalink / raw) To: Szymon Janc; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development Sorry, I see the problem. ro.kernel.qemu is set to 1. I'm commenting out the check. And rebuilding. On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <keith.conger@gmail.com> wrote: > Interesting, do you happen to know what I need to change in the kernel? > > Thanks again! > Keith > > On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: >> Hi Keith, >> >> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: >>> Thanks I'll try that, do you know which BoardConfig option triggers >>> its build? Eventually I'd like to send my work in getting Bluez in the >>> bbbandroid repo to its maintainer. >> >> I think the problem with bt working from haltest but not from java is that this >> board of your is using kernel for emulator. >> >> >> This is from your logcat: >> I/SystemServer( 595): No Bluetooh Service (emulator) >> >> and check this for reference: >> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 >> >>> >>> Thanks, >>> Keith >>> >>> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko >>> <andrei.emeltchenko.news@gmail.com> wrote: >>> > Hi Keith, >>> > >>> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: >>> >> Can't seem to figure out why audio.a2dp.default.so isn't being built. >>> >> >>> > >>> > This depends on your Android board configuration. >>> > >>> > afaik you can still build it locally with "mm" and copy to target >>> > >>> > adb sync should be enough >>> > >>> > Best regards >>> > Andrei Emeltchenko >>> > >>> > >>> >> It seems almost like its not even trying to start bluetoothd. I >>> >> wrapped it with strace, and it didn't create a trace log. >>> >> >>> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: >>> >> > Ok I added the additional kernel modules. >>> >> > >>> >> > Here is a logcat from boot to turning on bluetooth in the UI. >>> >> > >>> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. >>> >> > >>> >> > Thanks, >>> >> > Keith >>> >> > >>> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: >>> >> >> Hi Keith, >>> >> >> >>> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: >>> >> >>> Actually I had tried through the UI first and got the above logcat >>> >> >>> messages. I then tried HAL test. >>> >> >>> >>> >> >>> Just for some additional background I'm running kernel 3.8.13 and >>> >> >>> bluetooth modules from backports-3.18.1-1 >>> >> >> >>> >> >> If haltest is working that means kernel is configured properly. >>> >> >> >>> >> >>> I have them at the bottom of "on boot" in the init.rc. I have >>> >> >>> attached my kernel config and init.rc. >>> >> >> >>> >> >> Could you attach full logcat starting from boot? >>> >> >> >>> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect >>> >> >> BT enable but is needed for music streaming over BT). >>> >> >> >>> >> >>> >>> >> >>> I noticed in the mako example the following additional modules are >>> >> >>> loaded, I'm guessing I should add them also? >>> >> >>> insmod /system/lib/modules/rfcomm.ko >>> >> >>> insmod /system/lib/modules/bnep.ko >>> >> >> >>> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN >>> >> >> (BT tethering). >>> >> >> >>> >> >>> >>> >> >>> Thanks again for the help. >>> >> >>> Keith >>> >> >>> >>> >> >> >>> >> >> -- >>> >> >> BR >>> >> >> Szymon Janc >>> >> > >>> >> > >>> >> > >>> >> > -- >>> >> > Keith Conger >>> >> > keith DOT conger AT gmail DOT com >>> >> > http://thecongers.org >>> >> >>> >> >>> >> >>> >> -- >>> >> Keith Conger >>> >> keith DOT conger AT gmail DOT com >>> >> http://thecongers.org >>> >> -- >>> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in >>> >> the body of a message to majordomo@vger.kernel.org >>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> >>> >>> >> >> -- >> Best regards, >> Szymon Janc > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 17:25 ` Keith Conger @ 2015-02-19 18:49 ` Keith Conger 2015-02-20 10:05 ` Szymon Janc 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-19 18:49 UTC (permalink / raw) To: Szymon Janc; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development That did the trick! It appears bluetooth is now working! Thanks again for all your help and patience! Keith On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <keith.conger@gmail.com> wrote: > Sorry, I see the problem. ro.kernel.qemu is set to 1. > > I'm commenting out the check. And rebuilding. > > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <keith.conger@gmail.com> wrote: >> Interesting, do you happen to know what I need to change in the kernel? >> >> Thanks again! >> Keith >> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: >>> Hi Keith, >>> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: >>>> Thanks I'll try that, do you know which BoardConfig option triggers >>>> its build? Eventually I'd like to send my work in getting Bluez in the >>>> bbbandroid repo to its maintainer. >>> >>> I think the problem with bt working from haltest but not from java is that this >>> board of your is using kernel for emulator. >>> >>> >>> This is from your logcat: >>> I/SystemServer( 595): No Bluetooh Service (emulator) >>> >>> and check this for reference: >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 >>> >>>> >>>> Thanks, >>>> Keith >>>> >>>> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko >>>> <andrei.emeltchenko.news@gmail.com> wrote: >>>> > Hi Keith, >>>> > >>>> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote: >>>> >> Can't seem to figure out why audio.a2dp.default.so isn't being built. >>>> >> >>>> > >>>> > This depends on your Android board configuration. >>>> > >>>> > afaik you can still build it locally with "mm" and copy to target >>>> > >>>> > adb sync should be enough >>>> > >>>> > Best regards >>>> > Andrei Emeltchenko >>>> > >>>> > >>>> >> It seems almost like its not even trying to start bluetoothd. I >>>> >> wrapped it with strace, and it didn't create a trace log. >>>> >> >>>> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote: >>>> >> > Ok I added the additional kernel modules. >>>> >> > >>>> >> > Here is a logcat from boot to turning on bluetooth in the UI. >>>> >> > >>>> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that. >>>> >> > >>>> >> > Thanks, >>>> >> > Keith >>>> >> > >>>> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote: >>>> >> >> Hi Keith, >>>> >> >> >>>> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote: >>>> >> >>> Actually I had tried through the UI first and got the above logcat >>>> >> >>> messages. I then tried HAL test. >>>> >> >>> >>>> >> >>> Just for some additional background I'm running kernel 3.8.13 and >>>> >> >>> bluetooth modules from backports-3.18.1-1 >>>> >> >> >>>> >> >> If haltest is working that means kernel is configured properly. >>>> >> >> >>>> >> >>> I have them at the bottom of "on boot" in the init.rc. I have >>>> >> >>> attached my kernel config and init.rc. >>>> >> >> >>>> >> >> Could you attach full logcat starting from boot? >>>> >> >> >>>> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect >>>> >> >> BT enable but is needed for music streaming over BT). >>>> >> >> >>>> >> >>> >>>> >> >>> I noticed in the mako example the following additional modules are >>>> >> >>> loaded, I'm guessing I should add them also? >>>> >> >>> insmod /system/lib/modules/rfcomm.ko >>>> >> >>> insmod /system/lib/modules/bnep.ko >>>> >> >> >>>> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN >>>> >> >> (BT tethering). >>>> >> >> >>>> >> >>> >>>> >> >>> Thanks again for the help. >>>> >> >>> Keith >>>> >> >>> >>>> >> >> >>>> >> >> -- >>>> >> >> BR >>>> >> >> Szymon Janc >>>> >> > >>>> >> > >>>> >> > >>>> >> > -- >>>> >> > Keith Conger >>>> >> > keith DOT conger AT gmail DOT com >>>> >> > http://thecongers.org >>>> >> >>>> >> >>>> >> >>>> >> -- >>>> >> Keith Conger >>>> >> keith DOT conger AT gmail DOT com >>>> >> http://thecongers.org >>>> >> -- >>>> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in >>>> >> the body of a message to majordomo@vger.kernel.org >>>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> >>>> >>>> >>>> >>> >>> -- >>> Best regards, >>> Szymon Janc >> >> >> >> -- >> Keith Conger >> keith DOT conger AT gmail DOT com >> http://thecongers.org > > > > -- > Keith Conger > keith DOT conger AT gmail DOT com > http://thecongers.org -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-19 18:49 ` Keith Conger @ 2015-02-20 10:05 ` Szymon Janc 2015-02-20 14:59 ` Keith Conger 0 siblings, 1 reply; 18+ messages in thread From: Szymon Janc @ 2015-02-20 10:05 UTC (permalink / raw) To: Keith Conger; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development Hi Keith, On Thursday 19 of February 2015 11:49:43 Keith Conger wrote: > That did the trick! It appears bluetooth is now working! Thanks again > for all your help and patience! I'm glad that it works for you, feel free to get back if you would have any problems. As for those libs being installed in /system/lib instead of /system/lib/hw it looks like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly installed in hw). I haven't tracked it why this happen yet. > > Keith > > On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <keith.conger@gmail.com> wrote: > > Sorry, I see the problem. ro.kernel.qemu is set to 1. > > > > I'm commenting out the check. And rebuilding. > > > > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <keith.conger@gmail.com> wrote: > >> Interesting, do you happen to know what I need to change in the kernel? > >> > >> Thanks again! > >> Keith > >> > >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: > >>> Hi Keith, > >>> > >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: > >>>> Thanks I'll try that, do you know which BoardConfig option triggers > >>>> its build? Eventually I'd like to send my work in getting Bluez in the > >>>> bbbandroid repo to its maintainer. > >>> > >>> I think the problem with bt working from haltest but not from java is that this > >>> board of your is using kernel for emulator. > >>> > >>> > >>> This is from your logcat: > >>> I/SystemServer( 595): No Bluetooh Service (emulator) > >>> > >>> and check this for reference: > >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 > >>> > >>>> > >>>> Thanks, > >>>> Keith > -- Best regards, Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-20 10:05 ` Szymon Janc @ 2015-02-20 14:59 ` Keith Conger 2015-02-20 16:30 ` Szymon Janc 0 siblings, 1 reply; 18+ messages in thread From: Keith Conger @ 2015-02-20 14:59 UTC (permalink / raw) To: Szymon Janc; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development If I figure it out I'll let you know. I'm also trying to figure out why audio.a2dp.default and audio.sco.default aren't being build automatically. Thanks again, Keith On Fri, Feb 20, 2015 at 3:05 AM, Szymon Janc <szymon.janc@tieto.com> wrote: > Hi Keith, > > On Thursday 19 of February 2015 11:49:43 Keith Conger wrote: >> That did the trick! It appears bluetooth is now working! Thanks again >> for all your help and patience! > > I'm glad that it works for you, feel free to get back if you would have any problems. > > As for those libs being installed in /system/lib instead of /system/lib/hw it looks > like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly > installed in hw). I haven't tracked it why this happen yet. > >> >> Keith >> >> On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <keith.conger@gmail.com> wrote: >> > Sorry, I see the problem. ro.kernel.qemu is set to 1. >> > >> > I'm commenting out the check. And rebuilding. >> > >> > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <keith.conger@gmail.com> wrote: >> >> Interesting, do you happen to know what I need to change in the kernel? >> >> >> >> Thanks again! >> >> Keith >> >> >> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: >> >>> Hi Keith, >> >>> >> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: >> >>>> Thanks I'll try that, do you know which BoardConfig option triggers >> >>>> its build? Eventually I'd like to send my work in getting Bluez in the >> >>>> bbbandroid repo to its maintainer. >> >>> >> >>> I think the problem with bt working from haltest but not from java is that this >> >>> board of your is using kernel for emulator. >> >>> >> >>> >> >>> This is from your logcat: >> >>> I/SystemServer( 595): No Bluetooh Service (emulator) >> >>> >> >>> and check this for reference: >> >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 >> >>> >> >>>> >> >>>> Thanks, >> >>>> Keith > >> > > -- > Best regards, > Szymon Janc -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: android-bluez with usb adapter 2015-02-20 14:59 ` Keith Conger @ 2015-02-20 16:30 ` Szymon Janc 0 siblings, 0 replies; 18+ messages in thread From: Szymon Janc @ 2015-02-20 16:30 UTC (permalink / raw) To: Keith Conger; +Cc: Andrei Emeltchenko, Szymon Janc, BlueZ development Hi Keith, On Friday 20 of February 2015 07:59:10 Keith Conger wrote: > If I figure it out I'll let you know. I've already pushed a patch that should fix installation path on KK. > I'm also trying to figure out > why audio.a2dp.default and audio.sco.default aren't being build > automatically. Those libs are optional so you need to add them to PRODUCT_PACKAGES for your device. Check for reference (this is for mako (Nexus 4)): https://code.google.com/p/aosp-bluez/source/browse/device.mk?repo=device-lge-mako#183 > Thanks again, > Keith > > On Fri, Feb 20, 2015 at 3:05 AM, Szymon Janc <szymon.janc@tieto.com> wrote: > > Hi Keith, > > > > On Thursday 19 of February 2015 11:49:43 Keith Conger wrote: > >> That did the trick! It appears bluetooth is now working! Thanks again > >> for all your help and patience! > > > > I'm glad that it works for you, feel free to get back if you would have any problems. > > > > As for those libs being installed in /system/lib instead of /system/lib/hw it looks > > like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly > > installed in hw). I haven't tracked it why this happen yet. > > > >> > >> Keith > >> > >> On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <keith.conger@gmail.com> wrote: > >> > Sorry, I see the problem. ro.kernel.qemu is set to 1. > >> > > >> > I'm commenting out the check. And rebuilding. > >> > > >> > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <keith.conger@gmail.com> wrote: > >> >> Interesting, do you happen to know what I need to change in the kernel? > >> >> > >> >> Thanks again! > >> >> Keith > >> >> > >> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <szymon.janc@tieto.com> wrote: > >> >>> Hi Keith, > >> >>> > >> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote: > >> >>>> Thanks I'll try that, do you know which BoardConfig option triggers > >> >>>> its build? Eventually I'd like to send my work in getting Bluez in the > >> >>>> bbbandroid repo to its maintainer. > >> >>> > >> >>> I think the problem with bt working from haltest but not from java is that this > >> >>> board of your is using kernel for emulator. > >> >>> > >> >>> > >> >>> This is from your logcat: > >> >>> I/SystemServer( 595): No Bluetooh Service (emulator) > >> >>> > >> >>> and check this for reference: > >> >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487 > >> >>> > >> >>>> > >> >>>> Thanks, > >> >>>> Keith > > > >> > > > > -- > > Best regards, > > Szymon Janc > > > > -- Best regards, Szymon Janc ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2015-02-20 16:30 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-17 21:16 android-bluez with usb adapter Keith Conger
2015-02-17 21:47 ` Szymon Janc
[not found] ` <CALUN+EcJ4p4kkFDZDyi01iSAwDMv4M1Q=axAPiCb+YOAQ64CNQ@mail.gmail.com>
2015-02-18 7:34 ` Szymon Janc
2015-02-18 16:01 ` Keith Conger
2015-02-18 18:41 ` Keith Conger
2015-02-18 19:52 ` Szymon Janc
2015-02-18 19:57 ` Szymon Janc
[not found] ` <CALUN+EcsmogUt4PU-sSM4peusX4gdnmAF=ou1ouj5y-QPSpq3Q@mail.gmail.com>
2015-02-18 20:37 ` Szymon Janc
[not found] ` <CALUN+EfrG1o8VsTWjMxW7Y4NGe=-E3M_hz_618ToAG4QHwPZKA@mail.gmail.com>
2015-02-19 15:39 ` Keith Conger
2015-02-19 16:02 ` Andrei Emeltchenko
2015-02-19 16:06 ` Keith Conger
2015-02-19 16:08 ` Szymon Janc
2015-02-19 16:31 ` Keith Conger
2015-02-19 17:25 ` Keith Conger
2015-02-19 18:49 ` Keith Conger
2015-02-20 10:05 ` Szymon Janc
2015-02-20 14:59 ` Keith Conger
2015-02-20 16:30 ` Szymon Janc
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.