Re: [PATCH net-next 2/3] net: ethernet: oa_tc6: deliver the PHY interrupt to phylib

[Parthiban Veerasooran <parthiban.veerasooran@microchip.com>]

On 04/09/26 6:37 pm, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
>> +     /* Populate all irq[] entries before registration so
>> +      * phy_device_create() picks up the virtual IRQ regardless of
>> +      * the PHY's MDIO address.
>> +      */
>> +     for (i = 0; i < PHY_MAX_ADDR; i++)
>> +             tc6->mdiobus->irq[i] = tc6->phy_virq;
> 
> Yes, or just a memcpy().
Thank you for the suggestion and confirmation. I do not think memcpy() 
would fit here since we are assigning the same value to all entries 
rather than copying from another buffer. But I will also check whether 
any helper would be appropriate here. If not will keep this loop as-is.

Best regards,
Parthiban V>
>       Andrew