From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: t.figa@samsung.com, mturquette@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 7/9] ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
Date: Mon, 12 May 2014 00:10:24 +0200 [thread overview]
Message-ID: <2401749.09O7ybXGvD@phil> (raw)
In-Reply-To: <3427359.fjFAW0MSIR@phil>
Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.
Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/mach-s3c24xx/Kconfig | 8 ++++----
arch/arm/mach-s3c24xx/Makefile | 4 ++--
arch/arm/mach-s3c24xx/common.c | 4 ----
arch/arm/mach-s3c24xx/mach-anubis.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-gta02.c | 8 ++++++--
arch/arm/mach-s3c24xx/mach-mini2440.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-nexcoder.c | 15 ++++++++++++---
arch/arm/mach-s3c24xx/mach-osiris.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-rx1950.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-rx3715.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-smdk2440.c | 10 +++++++---
12 files changed, 73 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5c9cffd..ddd6574 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -73,10 +73,10 @@ config CPU_S3C2416
config CPU_S3C2440
bool "SAMSUNG S3C2440"
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
help
@@ -84,10 +84,10 @@ config CPU_S3C2440
config CPU_S3C2442
bool "SAMSUNG S3C2442"
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select S3C2410_PM if PM
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index f254797..9010eba 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -29,9 +29,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 35cf88e..bda9dd4 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -92,7 +92,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
@@ -101,7 +100,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
@@ -110,7 +108,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
@@ -119,7 +116,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442b
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index f81944f..7a0d83b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -46,7 +46,6 @@
#include <net/ax88796.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -415,7 +414,6 @@ static void __init anubis_map_io(void)
#endif
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -433,6 +431,12 @@ static void __init anubis_map_io(void)
}
}
+static void __init anubis_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -452,6 +456,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = anubis_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index d8f6bb1..9db768f 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -45,7 +45,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
static void __init at2440evb_map_io(void)
{
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init at2440evb_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = at2440evb_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index dc4db84..fc3a08d 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
regulator_has_full_constraints();
}
+static void __init gta02_init_time(void)
+{
+ s3c2442_init_clocks(12000000);
+ samsung_timer_init();
+}
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.map_io = gta02_map_io,
.init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = gta02_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9e57fd9..5cc40ec 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -54,7 +54,6 @@
#include <linux/mtd/partitions.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init mini2440_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/*
* mini2440_features string
*
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = mini2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 3066851..05627c2 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -42,7 +42,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -135,13 +134,23 @@ static void __init nexcoder_sensorboard_init(void)
static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
+static void __init nexcoder_init_time(void)
+{
+ /*
+ * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
+ * meaning a xti value of 0Hz, so this machine will most likely
+ * not work out of the box and needs a fixup.
+ */
+ s3c2440_init_clocks(0);
+ samsung_timer_init();
+}
+
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -154,6 +163,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = nexcoder_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 487be02..3bc2c9b 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -40,7 +40,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
@@ -389,7 +388,6 @@ static void __init osiris_map_io(void)
#endif
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -413,6 +411,12 @@ static void __init osiris_map_io(void)
local_irq_restore(flags);
}
+static void __init osiris_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init osiris_init(void)
{
register_syscore_ops(&osiris_pm_syscore_ops);
@@ -434,6 +438,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.map_io = osiris_map_io,
.init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
- .init_time = samsung_timer_init,
+ .init_time = osiris_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 219454c..5f37f52 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -54,7 +54,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
@@ -746,7 +745,6 @@ static void __init rx1950_map_io(void)
#endif
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -759,6 +757,12 @@ static void __init rx1950_map_io(void)
s3c_pm_init();
}
+static void __init rx1950_init_time(void)
+{
+ s3c2442_init_clocks(16934000);
+ samsung_timer_init();
+}
+
static void __init rx1950_init_machine(void)
{
int i;
@@ -821,6 +825,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.reserve = rx1950_reserve,
.init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx1950_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index e6535ce..6e749ec 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -46,7 +46,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init rx3715_init_time(void)
+{
+ s3c2440_init_clocks(16934000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init rx3715_reserve(void)
{
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.reserve = rx3715_reserve,
.init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx3715_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index d071dcf..5fb89c0 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,7 +38,6 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2440_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
.init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
--
1.9.0
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/9] ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
Date: Mon, 12 May 2014 00:10:24 +0200 [thread overview]
Message-ID: <2401749.09O7ybXGvD@phil> (raw)
In-Reply-To: <3427359.fjFAW0MSIR@phil>
Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.
Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/mach-s3c24xx/Kconfig | 8 ++++----
arch/arm/mach-s3c24xx/Makefile | 4 ++--
arch/arm/mach-s3c24xx/common.c | 4 ----
arch/arm/mach-s3c24xx/mach-anubis.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-gta02.c | 8 ++++++--
arch/arm/mach-s3c24xx/mach-mini2440.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-nexcoder.c | 15 ++++++++++++---
arch/arm/mach-s3c24xx/mach-osiris.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-rx1950.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-rx3715.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-smdk2440.c | 10 +++++++---
12 files changed, 73 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5c9cffd..ddd6574 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -73,10 +73,10 @@ config CPU_S3C2416
config CPU_S3C2440
bool "SAMSUNG S3C2440"
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
help
@@ -84,10 +84,10 @@ config CPU_S3C2440
config CPU_S3C2442
bool "SAMSUNG S3C2442"
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select S3C2410_PM if PM
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index f254797..9010eba 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -29,9 +29,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 35cf88e..bda9dd4 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -92,7 +92,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
@@ -101,7 +100,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
@@ -110,7 +108,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
@@ -119,7 +116,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442b
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index f81944f..7a0d83b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -46,7 +46,6 @@
#include <net/ax88796.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -415,7 +414,6 @@ static void __init anubis_map_io(void)
#endif
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -433,6 +431,12 @@ static void __init anubis_map_io(void)
}
}
+static void __init anubis_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -452,6 +456,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = anubis_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index d8f6bb1..9db768f 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -45,7 +45,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
static void __init at2440evb_map_io(void)
{
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init at2440evb_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = at2440evb_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index dc4db84..fc3a08d 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
regulator_has_full_constraints();
}
+static void __init gta02_init_time(void)
+{
+ s3c2442_init_clocks(12000000);
+ samsung_timer_init();
+}
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.map_io = gta02_map_io,
.init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = gta02_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9e57fd9..5cc40ec 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -54,7 +54,6 @@
#include <linux/mtd/partitions.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init mini2440_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/*
* mini2440_features string
*
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = mini2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 3066851..05627c2 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -42,7 +42,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -135,13 +134,23 @@ static void __init nexcoder_sensorboard_init(void)
static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
+static void __init nexcoder_init_time(void)
+{
+ /*
+ * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
+ * meaning a xti value of 0Hz, so this machine will most likely
+ * not work out of the box and needs a fixup.
+ */
+ s3c2440_init_clocks(0);
+ samsung_timer_init();
+}
+
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -154,6 +163,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = nexcoder_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 487be02..3bc2c9b 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -40,7 +40,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
@@ -389,7 +388,6 @@ static void __init osiris_map_io(void)
#endif
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -413,6 +411,12 @@ static void __init osiris_map_io(void)
local_irq_restore(flags);
}
+static void __init osiris_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init osiris_init(void)
{
register_syscore_ops(&osiris_pm_syscore_ops);
@@ -434,6 +438,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.map_io = osiris_map_io,
.init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
- .init_time = samsung_timer_init,
+ .init_time = osiris_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 219454c..5f37f52 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -54,7 +54,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
@@ -746,7 +745,6 @@ static void __init rx1950_map_io(void)
#endif
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -759,6 +757,12 @@ static void __init rx1950_map_io(void)
s3c_pm_init();
}
+static void __init rx1950_init_time(void)
+{
+ s3c2442_init_clocks(16934000);
+ samsung_timer_init();
+}
+
static void __init rx1950_init_machine(void)
{
int i;
@@ -821,6 +825,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.reserve = rx1950_reserve,
.init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx1950_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index e6535ce..6e749ec 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -46,7 +46,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init rx3715_init_time(void)
+{
+ s3c2440_init_clocks(16934000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init rx3715_reserve(void)
{
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.reserve = rx3715_reserve,
.init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx3715_init_time,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index d071dcf..5fb89c0 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,7 +38,6 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2440_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
.init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
--
1.9.0
next prev parent reply other threads:[~2014-05-11 22:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-11 22:04 [PATCH v3 0/9] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework Heiko Stübner
2014-05-11 22:04 ` Heiko Stübner
2014-05-11 22:05 ` [PATCH v3 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf Heiko Stübner
2014-05-11 22:05 ` Heiko Stübner
2014-05-11 22:06 ` [PATCH v3 2/9] clk: samsung: add clock driver for external clock outputs Heiko Stübner
2014-05-11 22:06 ` Heiko Stübner
2014-05-11 22:06 ` [PATCH v3 3/9] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled Heiko Stübner
2014-05-11 22:06 ` Heiko Stübner
2014-05-11 22:08 ` [PATCH v3 4/9] dt-bindings: add documentation for s3c2410 clock controller Heiko Stübner
2014-05-11 22:08 ` Heiko Stübner
2014-05-11 22:09 ` [PATCH v3 5/9] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442 Heiko Stübner
2014-05-11 22:09 ` Heiko Stübner
2014-05-11 22:09 ` [PATCH v3 6/9] ARM: S3C24XX: add platform code for conversion to the common clock framework Heiko Stübner
2014-05-11 22:09 ` Heiko Stübner
2014-05-11 22:10 ` Heiko Stübner [this message]
2014-05-11 22:10 ` [PATCH v3 7/9] ARM: S3C24XX: convert s3c2440 and s3c2442 to " Heiko Stübner
2014-05-11 22:10 ` [PATCH v3 8/9] ARM: S3C24XX: convert s3c2410 " Heiko Stübner
2014-05-11 22:10 ` Heiko Stübner
2014-05-11 22:11 ` [PATCH v3 9/9] ARM: S3C24XX: remove legacy clock code Heiko Stübner
2014-05-11 22:11 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2401749.09O7ybXGvD@phil \
--to=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.