Re: [PATCH v5 19/23] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

["Heiko Stübner" <heiko@sntech.de>]

Am Donnerstag, 10. Februar 2022, 14:37:59 CET schrieb Sascha Hauer:
> On Thu, Feb 10, 2022 at 02:15:17PM +0100, Johan Jonker wrote:
> > 
> > 
> > On 2/10/22 12:47, Sascha Hauer wrote:
> > > On Thu, Feb 10, 2022 at 01:10:32AM +0100, Johan Jonker wrote:
> > >> Hi Sascha,
> > >>
> > >> Something with port and endpoint gives notifications.
> > >> Somehow with the conversion of rockchip,dw-hdmi.txt to YAML not all SoC
> > >> options were checked/covered (see rk3328 and rk3568).
> > >>
> > >> Allow multiple vop:
> > >> port or
> > >> port@0
> > >> 1x vop -> endpoint
> > >>
> > >> 2x vop -> endpoint@0
> > >>        -> endpoint@1
> > >>
> > >> Also allow for connector:
> > >> (not all existing DT have this yet)
> > >> port@1
> > >>       -> endpoint
> > >>
> > >> See also at graph.yaml
> > > 
> > > Ok, let me see if I get this right. The HDMI can either have one or two
> > > ports. It has one when the HDMI connector is not described in the device
> > > tree and two when it is. Also the first (or only) port can have one or
> > > two endpoints. It has one endpoint when the SoC has a single VOP and two
> > > endpoints when the SoC has two VOPs.
> > > 
> > > It's been a painful morning because my YAML knowledge is fairly limited,
> > > but here's what I came up with:
> > > 
> > >   ports:
> > >     $ref: /schemas/graph.yaml#/properties/ports
> > >     unevaluatedProperties: false
> > >     patternProperties:
> > >       "^port(@0)?$":
> > >         $ref: /schemas/graph.yaml#/properties/port
> > >         description: Input of the DWC HDMI TX
> > >         properties:
> > >           endpoint:
> > >             description: Connection to the VOP
> > >           endpoint@0:
> > >             description: Connection to the VOPB
> > >           endpoint@1:
> > >             description: Connection to the VOPL
> > >     properties:
> > >       port@1:
> > >         $ref: /schemas/graph.yaml#/properties/port
> > >         description: Output of the DWC HDMI TX
> > > 
> > > Does this look sane to you? With this a make dtbs_check on this binding
> > > doesn't generate warnings anymore, and even better it does generate
> > > warnings when I add some wrong nodes/properties to the dts files.
> > 
> > Hi,
> > 
> > Send a patch to rob+dt and he will let you know... ;)
> 
> ;)
> 
> > 
> > Also could you test the ARM branch as well just for sure with:
> > ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make  dtbs_check
> > DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> 
> That works fine except for iahb and isfr clocks in the wrong order in
> arch/arm/boot/dts/rk322x.dtsi.
> 
> > 
> > Could you group your serie a bit:
> > dt-bindings
> > drm patches
> > dts changes
> 
> That's the order I originally had. Heiko asked me to put the
> bindings, dts changes and driver patches together dor each topic.

with the background being that I can judge which parts are essentially
ready and possibly apply parts of a larger series without waiting
for everything to be ready.



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip