From: yani.ioannou@gmail.com (Yani Ioannou)
To: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>, LKML <linux-kernel@vger.kernel.org>,
LM Sensors <lm-sensors@lm-sensors.org>
Subject: [lm-sensors] [PATCH 2.6.12-rc4 15/15]
Date: Thu, 19 May 2005 06:25:59 +0000 [thread overview]
Message-ID: <2538186705051704181a70dbbf@mail.gmail.com> (raw)
In-Reply-To: <e9iUj0EZ.1116327879.1515720.khali@localhost>
Hi Jean,
On 5/17/05, Jean Delvare <khali@linux-fr.org> wrote:
> If you could come up with an additional demonstration patch for either
> the lm90 driver or the it87 driver, I would happily give it a try. The
> adm1026 has very few users AFAIK so it might not be the best choice to
> find testers, although I agree that it was a convenient way to
> demonstrate how drivers could benefit from the proposed change.
No problem, I'll give this a shot later today/tomorrow when I get some
time, it shouldn't be very hard.
>
> And, once again, thanks *a lot* for looking into this, this is very much
> appreciated.
>
The concept benefits bmcsensors more than anything else so it isn't
exactly unselfish but thanks :-), its great to know its appreciated.
Yani
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Yani Ioannou <yani.ioannou@gmail.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>, LKML <linux-kernel@vger.kernel.org>,
LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks
Date: Tue, 17 May 2005 07:18:51 -0400 [thread overview]
Message-ID: <2538186705051704181a70dbbf@mail.gmail.com> (raw)
In-Reply-To: <e9iUj0EZ.1116327879.1515720.khali@localhost>
Hi Jean,
On 5/17/05, Jean Delvare <khali@linux-fr.org> wrote:
> If you could come up with an additional demonstration patch for either
> the lm90 driver or the it87 driver, I would happily give it a try. The
> adm1026 has very few users AFAIK so it might not be the best choice to
> find testers, although I agree that it was a convenient way to
> demonstrate how drivers could benefit from the proposed change.
No problem, I'll give this a shot later today/tomorrow when I get some
time, it shouldn't be very hard.
>
> And, once again, thanks *a lot* for looking into this, this is very much
> appreciated.
>
The concept benefits bmcsensors more than anything else so it isn't
exactly unselfish but thanks :-), its great to know its appreciated.
Yani
next prev parent reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-17 10:47 [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: Yani Ioannou
2005-05-17 11:04 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-17 11:18 ` Yani Ioannou [this message]
2005-05-19 6:25 ` Yani Ioannou
2005-05-17 20:23 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-17 20:56 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-17 23:13 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-17 23:21 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-18 1:58 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Grant Coady
2005-05-19 6:25 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Grant Coady
2005-05-19 6:25 ` Yani Ioannou
2005-05-19 20:02 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-19 22:03 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 20:52 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-05-19 22:47 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH
2005-05-19 20:57 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-19 22:57 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 21:35 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-05-19 23:30 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH
2005-05-20 7:46 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-20 9:54 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-20 8:53 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-20 10:53 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22 1:58 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Dmitry Torokhov
2005-05-22 3:59 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Dmitry Torokhov
2005-05-22 6:50 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22 8:51 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-22 7:04 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Dmitry Torokhov
2005-05-22 9:05 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Dmitry Torokhov
2005-05-22 12:15 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-22 14:17 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22 12:32 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22 14:33 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-22 13:05 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-22 15:05 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-22 13:39 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-05-22 15:39 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-05-19 21:14 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Yani Ioannou
2005-05-19 23:15 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Yani Ioannou
2005-05-20 8:01 ` Grant Coady
2005-06-05 8:51 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Jean Delvare
2005-06-05 10:51 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Jean Delvare
2005-06-06 6:14 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks Greg KH
2005-06-06 9:17 ` [lm-sensors] [PATCH 2.6.12-rc4 15/15] Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2538186705051704181a70dbbf@mail.gmail.com \
--to=yani.ioannou@gmail.com \
--cc=greg@kroah.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.