[Xenomai] Adding a new RTnet driver

[Xenomai] Adding a new RTnet driver

[Leopold Palomo-Avellaneda]

Hi,

I have a box with this hardware:

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM 
(rev 31)

I would like to make it work with RTNet. It's a quite new hardware, that for 
example, 4.1.8 doesn't support. The driver is the e1000e.

Looking on the sources of Xenomai, I have seen that the rt_drivers seems very 
similar to the original ones but with some wrapped functions, some defines, and 
changed struct net device by struct rtnet device. However, I must admit that 
I'm not a kernel hacker and I'm not comfortable with this kind of code.

I have been surfing on the web but I not not seen any guide to convert a linux 
driver to RTnet. So my questions are:

- there's any recommendation to do that job?
- do you have some plans to update new drivers, especially e1000e?


Best regards,

Leopold







-- 
--
Linux User 152692     GPG: 05F4A7A949A2D9AA
Catalonia
-------------------------------------
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part.
URL: <http://xenomai.org/pipermail/xenomai/attachments/20161013/eab694c7/attachment.sig>