From: Alistair Popple <alistair@popple.id.au>
To: linuxppc-dev@lists.ozlabs.org
Cc: aneesh.kumar@linux.ibm.com, mikey@neuling.org,
"Paul A. Clarke" <pc@us.ibm.com>,
npiggin@gmail.com
Subject: Re: [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature
Date: Wed, 20 May 2020 09:56:23 +1000 [thread overview]
Message-ID: <26076686.W3figiy1un@townsend> (raw)
In-Reply-To: <20200519175153.GE24922@oc3272150783.ibm.com>
Thanks, not sure where I got that name from but it's probably wrong in a few
places. Will wait a bit in case there are any more comments and then respin
the series to update the name.
- Alistair
On Wednesday, 20 May 2020 3:51:53 AM AEST Paul A. Clarke wrote:
> On Tue, May 19, 2020 at 10:31:56AM +1000, Alistair Popple wrote:
> > Matrix multiple accumulate (MMA) is a new feature added to ISAv3.1 and
>
> Conclusion is that this should be "Matrix-Multiply Assist", but then there
> are a couple more below...
>
> > POWER10. Support on powernv can be selected via a firmware CPU device
> > tree feature which enables it via a PCR bit.
> >
> > Signed-off-by: Alistair Popple <alistair@popple.id.au>
> > ---
> >
> > arch/powerpc/include/asm/reg.h | 3 ++-
> > arch/powerpc/kernel/dt_cpu_ftrs.c | 17 ++++++++++++++++-
> > 2 files changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/reg.h
> > b/arch/powerpc/include/asm/reg.h index 1931b1142599..c446863a40cf 100644
> > --- a/arch/powerpc/include/asm/reg.h
> > +++ b/arch/powerpc/include/asm/reg.h
> > @@ -479,7 +479,8 @@
> >
> > #define PCR_VEC_DIS (__MASK(63-0)) /* Vec. disable (bit NA since
> > POWER8) */ #define PCR_VSX_DIS (__MASK(63-1)) /* VSX disable (bit NA
> > since POWER8) */ #define PCR_TM_DIS (__MASK(63-2)) /* Trans. memory
> > disable (POWER8) */>
> > -#define PCR_HIGH_BITS (PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS)
> > +#define PCR_MMA_DIS (__MASK(63-3)) /* Matrix-Multiply Accelerator */
>
> also here.
>
> > +#define PCR_HIGH_BITS (PCR_MMA_DIS | PCR_VEC_DIS | PCR_VSX_DIS |
> > PCR_TM_DIS)>
> > /*
> >
> > * These bits are used in the function kvmppc_set_arch_compat() to
> > specify and * determine both the compatibility level which we want to
> > emulate and the>
> > diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c
> > b/arch/powerpc/kernel/dt_cpu_ftrs.c index 93c340906aad..e7540ee5cad8
> > 100644
> > --- a/arch/powerpc/kernel/dt_cpu_ftrs.c
> > +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
> > @@ -75,6 +75,7 @@ static struct {
> >
> > u64 lpcr_clear;
> > u64 hfscr;
> > u64 fscr;
> >
> > + u64 pcr;
> >
> > } system_registers;
> >
> > static void (*init_pmu_registers)(void);
> >
> > @@ -102,7 +103,7 @@ static void __restore_cpu_cpufeatures(void)
> >
> > if (hv_mode) {
> >
> > mtspr(SPRN_LPID, 0);
> > mtspr(SPRN_HFSCR, system_registers.hfscr);
> >
> > - mtspr(SPRN_PCR, PCR_MASK);
> > + mtspr(SPRN_PCR, system_registers.pcr);
> >
> > }
> > mtspr(SPRN_FSCR, system_registers.fscr);
> >
> > @@ -555,6 +556,18 @@ static int __init feat_enable_large_ci(struct
> > dt_cpu_feature *f)>
> > return 1;
> >
> > }
> >
> > +static int __init feat_enable_mma(struct dt_cpu_feature *f)
> > +{
> > + u64 pcr;
> > +
> > + feat_enable(f);
> > + pcr = mfspr(SPRN_PCR);
> > + pcr &= ~PCR_MMA_DIS;
> > + mtspr(SPRN_PCR, pcr);
> > +
> > + return 1;
> > +}
> > +
> >
> > struct dt_cpu_feature_match {
> >
> > const char *name;
> > int (*enable)(struct dt_cpu_feature *f);
> >
> > @@ -629,6 +642,7 @@ static struct dt_cpu_feature_match __initdata
> >
> > {"vector-binary16", feat_enable, 0},
> > {"wait-v3", feat_enable, 0},
> > {"prefix-instructions", feat_enable, 0},
> >
> > + {"matrix-multiply-accumulate", feat_enable_mma, 0},
>
> and presumably here as well.
>
> > };
>
> PC
next prev parent reply other threads:[~2020-05-19 23:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 0:31 [PATCH v2 0/7] Base support for POWER10 Alistair Popple
2020-05-19 0:31 ` [PATCH v2 1/7] powerpc: Add new HWCAP bits Alistair Popple
2020-05-19 3:20 ` Michael Neuling
2020-05-19 17:48 ` Paul A. Clarke
2020-05-20 2:42 ` Michael Ellerman
2020-05-20 3:29 ` Alistair Popple
2020-05-19 0:31 ` [PATCH v2 2/7] powerpc: Add support for ISA v3.1 Alistair Popple
2020-05-19 4:04 ` Jordan Niethe
2020-05-19 5:45 ` Alistair Popple
2020-05-19 0:31 ` [PATCH v2 3/7] powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected Alistair Popple
2020-05-19 0:31 ` [PATCH v2 4/7] powerpc/dt_cpu_ftrs: Set current thread fscr bits Alistair Popple
2020-05-19 0:31 ` [PATCH v2 5/7] powerpc/dt_cpu_ftrs: Enable Prefixed Instructions Alistair Popple
2020-05-19 0:31 ` [PATCH v2 6/7] powerpc/dt_cpu_ftrs: Add MMA feature Alistair Popple
2020-05-19 14:49 ` Paul A. Clarke
2020-05-19 15:05 ` Segher Boessenkool
2020-05-19 15:22 ` Paul A. Clarke
2020-05-19 15:28 ` Segher Boessenkool
2020-05-19 15:49 ` Paul A. Clarke
2020-05-19 17:51 ` Paul A. Clarke
2020-05-19 23:56 ` Alistair Popple [this message]
2020-05-19 0:31 ` [PATCH v2 7/7] powerpc: Add POWER10 architected mode Alistair Popple
2020-05-19 3:58 ` Jordan Niethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26076686.W3figiy1un@townsend \
--to=alistair@popple.id.au \
--cc=aneesh.kumar@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=npiggin@gmail.com \
--cc=pc@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.