* Re[2]: [LARTC] Hardware solution? (or v.easy software fix instead) @ 2005-01-21 9:02 Robert Kurjata 2005-01-21 19:26 ` ajpearce 0 siblings, 1 reply; 2+ messages in thread From: Robert Kurjata @ 2005-01-21 9:02 UTC (permalink / raw) To: lartc Witaj ajpearce, W Twoim liœcie datowanym 21 stycznia 2005 (00:17:38) mo¿na przeczytaæ: Slightly OT but, For a Linksys wireless router (WRT54G) there are perfect solutions using wondershaper + iproute2 in an alternative firmwares. Also you can build your own firmware cause a build environment just works. Look at http://www.portless.net/menu/ewrt/ as a starting point, links at the end will drive you to the all important places. From my experience: kernel 2.4.20 + iproute2 + wonderhaper + ebtables + iptables + vconfig are just ready waiting for use. > The linksys linux router sounds ideal. Has anyone setup bandwidth > management on it before though? Sounds like a tall order? [snip] >> LARTC mailing list / LARTC@mailman.ds9a.nl >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >> > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -- Pozdrowienia, Robert Kurjata _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Re[2]: [LARTC] Hardware solution? (or v.easy software fix instead) 2005-01-21 9:02 Re[2]: [LARTC] Hardware solution? (or v.easy software fix instead) Robert Kurjata @ 2005-01-21 19:26 ` ajpearce 0 siblings, 0 replies; 2+ messages in thread From: ajpearce @ 2005-01-21 19:26 UTC (permalink / raw) To: lartc I am considering this. But we will also be using a cable modem. I wondered if I could even get the cable modem to do CBQ as well with something like sigma! Just a thought though. On Fri, 21 Jan 2005 10:02:21 +0100, Robert Kurjata <rkurjata@ire.pw.edu.pl> wrote: > Witaj ajpearce, > > W Twoim liście datowanym 21 stycznia 2005 (00:17:38) można przeczytać: > > Slightly OT but, > > For a Linksys wireless router (WRT54G) there are perfect solutions > using wondershaper + iproute2 in an alternative firmwares. Also you > can build your own firmware cause a build environment just works. > > Look at http://www.portless.net/menu/ewrt/ as a starting point, links > at the end will drive you to the all important places. > > From my experience: kernel 2.4.20 + iproute2 + wonderhaper + ebtables + > iptables + vconfig are just ready waiting for use. > > > The linksys linux router sounds ideal. Has anyone setup bandwidth > > management on it before though? Sounds like a tall order? > > > [snip] > > >> LARTC mailing list / LARTC@mailman.ds9a.nl > >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > >> > > _______________________________________________ > > LARTC mailing list / LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > -- > Pozdrowienia, > Robert Kurjata > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-01-21 19:26 UTC | newest] Thread overview: 2+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-01-21 9:02 Re[2]: [LARTC] Hardware solution? (or v.easy software fix instead) Robert Kurjata 2005-01-21 19:26 ` ajpearce
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.