From: Hans-Peter Jansen <hpj@urpla.net>
To: NeilBrown <neilb@suse.de>
Cc: Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: Persistent failures with simple md setup
Date: Mon, 18 Mar 2013 12:20:57 +0100 [thread overview]
Message-ID: <2777026.gm19DAWULs@xrated> (raw)
In-Reply-To: <1407824.2kxT8nEo5d@xrated>
Am Freitag, 15. März 2013, 23:43:31 schrieb Hans-Peter Jansen:
> Am Mittwoch, 13. März 2013, 11:52:35 schrieben Sie:
> > hi,
> >
> > wonder if you could try one more test for me.
> > With the other (echo BEFORE / echo AFTER etc) tracing still there, change
> >
> > the /sbin/udevadm settle --timeout=$MDADM_DEVICE_TIMEOUT
> >
> > to
> >
> > /sbin/udevadm --debug settle --timeout=$MDADM_DEVICE_TIMEOUT >
> > /dev/kmsg
> >
> > 2>&1
> >
> > I found there is a case where "udevadm settle" can exit before the queue
> > is
> >
> > empty. It seems like a very unlikely scenario, but it seems clear that
> > something "unlikely" is happening.
> >
> > I'm hoping to see
> >
> > timeout waiting for udev queue
> >
> > appear in the logs when this runs.
> >
> > If you could add that and post the 'dmesg' output if you ever get that
> > message - or maybe even if you don't - that would be very helpful.
>
> Did that right now and disabled the sleep 10 in front, that provisionally
> "solved" this issue BTW. Now waiting for another md issue to occur.
Here we go: (not censored in any way, and I hope to get the "window" right:
md0 was affected this time.
Mar 18 09:02:20 zaphkiel kernel: [ 10.153098] sd 6:0:0:0: [sdc] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
Mar 18 09:02:20 zaphkiel kernel: [ 10.202222] sd 6:0:0:0: [sdc] Write Protect is off
Mar 18 09:02:20 zaphkiel kernel: [ 10.230965] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
Mar 18 09:02:20 zaphkiel kernel: [ 10.234226] sd 6:0:0:0: [sdc] No Caching mode page present
Mar 18 09:02:20 zaphkiel kernel: [ 10.267155] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Mar 18 09:02:20 zaphkiel kernel: [ 10.309225] sd 6:0:0:0: [sdc] No Caching mode page present
Mar 18 09:02:20 zaphkiel kernel: [ 10.342135] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Mar 18 09:02:20 zaphkiel kernel: [ 10.379763] sdc: sdc1
Mar 18 09:02:20 zaphkiel kernel: [ 10.400224] sd 6:0:0:0: [sdc] No Caching mode page present
Mar 18 09:02:20 zaphkiel kernel: [ 10.433138] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Mar 18 09:02:20 zaphkiel kernel: [ 10.469953] sd 6:0:0:0: [sdc] Attached SCSI removable disk
Mar 18 09:02:20 zaphkiel kernel: [ 10.502901] Freeing unused kernel memory: 488k freed
Mar 18 09:02:20 zaphkiel kernel: [ 10.532672] usb 2-4: device descriptor read/64, error -71
Mar 18 09:02:20 zaphkiel kernel: [ 10.565302] Write protecting the kernel text: 5204k
Mar 18 09:02:20 zaphkiel kernel: [ 10.594587] Write protecting the kernel read-only data: 3540k
Mar 18 09:02:20 zaphkiel kernel: [ 10.629070] NX-protecting the kernel data: 5036k
Mar 18 09:02:20 zaphkiel kernel: [ 10.699772] ACPI: acpi_idle registered with cpuidle
Mar 18 09:02:20 zaphkiel kernel: [ 10.735081] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Mar 18 09:02:20 zaphkiel kernel: [ 10.792858] SGI XFS Quota Management subsystem
Mar 18 09:02:20 zaphkiel kernel: [ 10.821500] md: raid1 personality registered for level 1
Mar 18 09:02:20 zaphkiel kernel: [ 10.853390] usb 2-4: new high speed USB device number 5 using ehci_hcd
Mar 18 09:02:20 zaphkiel kernel: [ 10.894261] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Mar 18 09:02:20 zaphkiel kernel: [ 11.157034] usb 2-4: device descriptor read/64, error -71
Mar 18 09:02:20 zaphkiel kernel: [ 11.385910] md: bind<sda3>
Mar 18 09:02:20 zaphkiel kernel: [ 11.407964] md: bind<sdb3>
Mar 18 09:02:20 zaphkiel kernel: [ 11.427609] bio: create slab <bio-1> at 1
Mar 18 09:02:20 zaphkiel kernel: [ 11.451733] md/raid1:md124: active with 2 out of 2 mirrors
Mar 18 09:02:20 zaphkiel kernel: [ 11.484761] created bitmap (200 pages) for device md124
Mar 18 09:02:20 zaphkiel kernel: [ 11.527745] md124: bitmap initialized from disk: read 13/13 pages, set 0 of 409595 bits
Mar 18 09:02:20 zaphkiel kernel: [ 11.589866] md124: detected capacity change from 0 to 107372728320
Mar 18 09:02:20 zaphkiel kernel: [ 11.628729] md124: unknown partition table
Mar 18 09:02:20 zaphkiel kernel: [ 11.705023] usb 2-4: device descriptor read/64, error -71
Mar 18 09:02:20 zaphkiel kernel: [ 11.940026] usb 2-4: new high speed USB device number 6 using ehci_hcd
Mar 18 09:02:20 zaphkiel kernel: [ 12.443021] usb 2-4: device not accepting address 6, error -71
Mar 18 09:02:20 zaphkiel kernel: [ 12.579024] usb 2-4: new high speed USB device number 7 using ehci_hcd
Mar 18 09:02:20 zaphkiel kernel: [ 13.082029] usb 2-4: device not accepting address 7, error -71
Mar 18 09:02:20 zaphkiel kernel: [ 13.117018] hub 2-0:1.0: unable to enumerate USB device on port 4
Mar 18 09:02:20 zaphkiel kernel: [ 13.385793] md: raid0 personality registered for level 0
Mar 18 09:02:20 zaphkiel kernel: [ 13.424034] usb 4-2: new low speed USB device number 2 using ohci_hcd
Mar 18 09:02:20 zaphkiel kernel: [ 13.471246] md: raid10 personality registered for level 10
Mar 18 09:02:20 zaphkiel kernel: [ 13.517387] async_tx: api initialized (async)
Mar 18 09:02:20 zaphkiel kernel: [ 13.544243] xor: automatically using best checksumming function: pIII_sse
Mar 18 09:02:20 zaphkiel kernel: [ 13.590008] pIII_sse : 7224.000 MB/sec
Mar 18 09:02:20 zaphkiel kernel: [ 13.615137] xor: using function: pIII_sse (7224.000 MB/sec)
Mar 18 09:02:20 zaphkiel kernel: [ 13.666017] raid6: int32x1 996 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.705044] raid6: int32x2 1101 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.744041] raid6: int32x4 789 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.783015] raid6: int32x8 878 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.822041] raid6: mmxx1 1972 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.861017] raid6: mmxx2 3632 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.883514] usb 4-2: New USB device found, idVendor=093a, idProduct=2510
Mar 18 09:02:20 zaphkiel kernel: [ 13.940023] raid6: sse1x1 2007 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 13.962555] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 18 09:02:20 zaphkiel kernel: [ 14.022017] raid6: sse1x2 3406 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 14.061017] usb 4-2: Product: USB OPTICAL MOUSE
Mar 18 09:02:20 zaphkiel kernel: [ 14.088224] raid6: sse2x1 3433 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 14.110741] usb 4-2: Manufacturer: PIXART
Mar 18 09:02:20 zaphkiel kernel: [ 14.152588] raid6: sse2x2 4511 MB/s
Mar 18 09:02:20 zaphkiel kernel: [ 14.175186] raid6: using algorithm sse2x2 (4511 MB/s)
Mar 18 09:02:20 zaphkiel kernel: [ 14.207849] md: raid6 personality registered for level 6
Mar 18 09:02:20 zaphkiel kernel: [ 14.239745] md: raid5 personality registered for level 5
Mar 18 09:02:20 zaphkiel kernel: [ 14.272105] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input1
Mar 18 09:02:20 zaphkiel kernel: [ 14.334075] md: raid4 personality registered for level 4
Mar 18 09:02:20 zaphkiel kernel: [ 14.371117] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:04.0-2/input0
Mar 18 09:02:20 zaphkiel kernel: [ 14.485966] XFS (md124): Mounting Filesystem
Mar 18 09:02:20 zaphkiel kernel: [ 14.701101] XFS (md124): Ending clean mount
Mar 18 09:02:20 zaphkiel kernel: [ 14.731718] usb 4-4: new full speed USB device number 3 using ohci_hcd
Mar 18 09:02:20 zaphkiel kernel: [ 14.959749] usb 4-4: not running at top speed; connect to a high speed hub
Mar 18 09:02:20 zaphkiel kernel: [ 15.020945] usb 4-4: New USB device found, idVendor=05e3, idProduct=0760
Mar 18 09:02:20 zaphkiel kernel: [ 15.066896] usb 4-4: New USB device strings: Mfr=0, Product=3, SerialNumber=4
Mar 18 09:02:20 zaphkiel kernel: [ 15.109742] usb 4-4: Product: Flash Reader
Mar 18 09:02:20 zaphkiel kernel: [ 15.134328] usb 4-4: SerialNumber: 03570
Mar 18 09:02:20 zaphkiel kernel: [ 15.159828] scsi7 : usb-storage 4-4:1.0
Mar 18 09:02:20 zaphkiel kernel: [ 16.191763] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
Mar 18 09:02:20 zaphkiel kernel: [ 16.256768] scsi 7:0:0:1: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
Mar 18 09:02:20 zaphkiel kernel: [ 16.332762] scsi 7:0:0:2: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
Mar 18 09:02:20 zaphkiel kernel: [ 16.401753] sd 7:0:0:0: [sdd] Attached SCSI removable disk
Mar 18 09:02:20 zaphkiel kernel: [ 16.450765] scsi 7:0:0:3: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
Mar 18 09:02:20 zaphkiel kernel: [ 16.508754] sd 7:0:0:1: [sde] Attached SCSI removable disk
Mar 18 09:02:20 zaphkiel kernel: [ 16.572754] sd 7:0:0:2: [sdf] Attached SCSI removable disk
Mar 18 09:02:20 zaphkiel kernel: [ 16.625754] sd 7:0:0:3: [sdg] Attached SCSI removable disk
Mar 18 09:02:20 zaphkiel kernel: [ 20.412626] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Mar 18 09:02:20 zaphkiel kernel: [ 20.460450] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
Mar 18 09:02:20 zaphkiel kernel: [ 20.502526] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
Mar 18 09:02:20 zaphkiel kernel: [ 20.555583] forcedeth 0000:00:0a.0: setting latency timer to 64
Mar 18 09:02:20 zaphkiel kernel: [ 20.608180] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:2b:d2:58
Mar 18 09:02:20 zaphkiel kernel: [ 20.661808] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
Mar 18 09:02:20 zaphkiel kernel: [ 21.514743] 8139too: 8139too Fast Ethernet driver 0.9.28
Mar 18 09:02:20 zaphkiel kernel: [ 21.661650] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
Mar 18 09:02:20 zaphkiel kernel: [ 21.745044] 8139too 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
Mar 18 09:02:20 zaphkiel kernel: [ 21.853853] 8139too 0000:01:06.0: eth1: RealTek RTL8139 at 0xf7a32c00, 00:08:54:0a:9b:53, IRQ 16
Mar 18 09:02:20 zaphkiel kernel: [ 22.792962] BEFORE udevadm settle --timeout=60
Mar 18 09:02:20 zaphkiel kernel: [ 22.879311] main:
Mar 18 09:02:20 zaphkiel kernel: [ 22.935601] runtime dir '/run/udev'
Mar 18 09:02:20 zaphkiel kernel: [ 22.962183] run_command:
Mar 18 09:02:20 zaphkiel kernel: [ 23.021385] calling: settle
Mar 18 09:02:20 zaphkiel kernel: [ 26.373950] i2c i2c-0: nForce2 SMBus adapter at 0x600
Mar 18 09:02:20 zaphkiel kernel: [ 26.439755] WARNING! power/level is deprecated; use power/control instead
Mar 18 09:02:20 zaphkiel kernel: [ 26.482815] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [io 0x700-0x73f]
Mar 18 09:02:20 zaphkiel kernel: [ 26.579063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 18 09:02:20 zaphkiel kernel: [ 26.649433] firewire_ohci 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
Mar 18 09:02:20 zaphkiel kernel: [ 26.739746] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
Mar 18 09:02:20 zaphkiel kernel: [ 26.796477] firewire_ohci 0000:04:00.0: setting latency timer to 64
Mar 18 09:02:20 zaphkiel kernel: [ 26.801886] Linux video capture interface: v2.00
Mar 18 09:02:20 zaphkiel kernel: [ 26.849080] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x10
Mar 18 09:02:20 zaphkiel kernel: [ 26.966186] pata_amd 0000:00:06.0: version 0.4.1
Mar 18 09:02:20 zaphkiel kernel: [ 26.966229] pata_amd 0000:00:06.0: setting latency timer to 64
Mar 18 09:02:20 zaphkiel kernel: [ 26.968773] scsi8 : pata_amd
Mar 18 09:02:20 zaphkiel kernel: [ 26.992242] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 27.031690] scsi9 : pata_amd
Mar 18 09:02:20 zaphkiel kernel: [ 27.064347] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Mar 18 09:02:20 zaphkiel kernel: [ 27.152035] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Mar 18 09:02:20 zaphkiel kernel: [ 27.207504] IT8712 SuperIO detected.
Mar 18 09:02:20 zaphkiel kernel: [ 27.248861] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Mar 18 09:02:20 zaphkiel kernel: [ 27.358729] parport_pc 00:04: reported by Plug and Play ACPI
Mar 18 09:02:20 zaphkiel kernel: [ 27.396357] sd 1:0:0:0: Attached scsi generic sg1 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 27.435502] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
Mar 18 09:02:20 zaphkiel kernel: [ 27.479017] firewire_core: created device fw0: GUID 001e8c00018b93c2, S400
Mar 18 09:02:20 zaphkiel kernel: [ 27.522961] ACPI: Power Button [PWRB]
Mar 18 09:02:20 zaphkiel kernel: [ 27.547160] parport0: PC-style at 0x378
Mar 18 09:02:20 zaphkiel kernel: [ 27.569182] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
Mar 18 09:02:20 zaphkiel kernel: [ 27.572162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Mar 18 09:02:20 zaphkiel kernel: [ 27.619485] nvidia: module license 'NVIDIA' taints kernel.
Mar 18 09:02:20 zaphkiel kernel: [ 27.652780] ata7.00: configured for UDMA/33
Mar 18 09:02:20 zaphkiel kernel: [ 27.681871] sd 6:0:0:0: Attached scsi generic sg2 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 27.720249] scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
Mar 18 09:02:20 zaphkiel kernel: [ 27.773178] , irq 7
Mar 18 09:02:20 zaphkiel kernel: [ 27.785284] Disabling lock debugging due to kernel taint
Mar 18 09:02:20 zaphkiel kernel: [ 27.818744] [
Mar 18 09:02:20 zaphkiel kernel: [ 27.827966] sd 7:0:0:0: Attached scsi generic sg3 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 27.862615] PCSPP
Mar 18 09:02:20 zaphkiel kernel: [ 27.873974] ACPI: Power Button [PWRF]
Mar 18 09:02:20 zaphkiel kernel: [ 27.903194] input: PC Speaker as /devices/platform/pcspkr/input/input4
Mar 18 09:02:20 zaphkiel kernel: [ 27.947382] ,TRISTATE]
Mar 18 09:02:20 zaphkiel kernel: [ 27.967591] wmi: Mapper loaded
Mar 18 09:02:20 zaphkiel kernel: [ 28.019498] sd 7:0:0:1: Attached scsi generic sg4 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 28.086333] ppdev: user-space parallel port driver
Mar 18 09:02:20 zaphkiel kernel: [ 28.145165] sd 7:0:0:2: Attached scsi generic sg5 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 28.219780] sd 7:0:0:3: Attached scsi generic sg6 type 0
Mar 18 09:02:20 zaphkiel kernel: [ 28.294832] scsi 8:0:0:0: Attached scsi generic sg7 type 5
Mar 18 09:02:20 zaphkiel kernel: [ 28.359838] ata8: port disabled--ignoring
Mar 18 09:02:20 zaphkiel kernel: [ 28.377526] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
Mar 18 09:02:20 zaphkiel kernel: [ 28.460047] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
Mar 18 09:02:20 zaphkiel kernel: [ 28.544146] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
Mar 18 09:02:20 zaphkiel kernel: [ 28.616023] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
Mar 18 09:02:20 zaphkiel kernel: [ 28.725762] hda_intel: Disabling MSI
Mar 18 09:02:20 zaphkiel kernel: [ 28.749946] bttv: driver version 0.9.19 loaded
Mar 18 09:02:20 zaphkiel kernel: [ 28.776705] snd_hda_intel 0000:00:07.0: setting latency timer to 64
Mar 18 09:02:20 zaphkiel kernel: [ 28.787103] ALSA hda_intel.c:1454 Enable delay in RIRB handling
Mar 18 09:02:20 zaphkiel kernel: [ 28.804531] bttv: using 8 buffers with 2080k (520 pages) each for capture
Mar 18 09:02:20 zaphkiel kernel: [ 28.864408] IR NEC protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 28.960457] IR RC5(x) protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.004015] bttv: Bt8xx card found (0).
Mar 18 09:02:20 zaphkiel kernel: [ 29.088643] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
Mar 18 09:02:20 zaphkiel kernel: [ 29.123158] bttv 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
Mar 18 09:02:20 zaphkiel kernel: [ 29.180972] IR RC6 protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.250091] bttv0: Bt878 (rev 17) at 0000:01:07.0,
Mar 18 09:02:20 zaphkiel kernel: [ 29.278950] IR JVC protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.339358] irq: 19, latency: 64, mmio: 0xcfffe000
Mar 18 09:02:20 zaphkiel kernel: [ 29.400761] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Mar 18 09:02:20 zaphkiel kernel: [ 29.447978] IR Sony protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.521989] IR MCE Keyboard/mouse protocol handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.562022] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Mar 18 09:02:20 zaphkiel kernel: [ 29.636072] lirc_dev: IR Remote Control driver registered, major 250
Mar 18 09:02:20 zaphkiel kernel: [ 29.679569] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Mar 18 09:02:20 zaphkiel kernel: [ 29.683413] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Mar 18 09:02:20 zaphkiel kernel: [ 29.725031] ALSA patch_realtek.c:1228 SKU: Nid=0x1d sku_cfg=0x4015e601
Mar 18 09:02:20 zaphkiel kernel: [ 29.725035] ALSA patch_realtek.c:1230 SKU: port_connectivity=0x1
Mar 18 09:02:20 zaphkiel kernel: [ 29.725038] ALSA patch_realtek.c:1231 SKU: enable_pcbeep=0x1
Mar 18 09:02:20 zaphkiel kernel: [ 29.725040] ALSA patch_realtek.c:1232 SKU: check_sum=0x00000005
Mar 18 09:02:20 zaphkiel kernel: [ 29.725042] ALSA patch_realtek.c:1233 SKU: customization=0x000000e6
Mar 18 09:02:20 zaphkiel kernel: [ 29.725045] ALSA patch_realtek.c:1234 SKU: external_amp=0x0
Mar 18 09:02:20 zaphkiel kernel: [ 29.725047] ALSA patch_realtek.c:1235 SKU: platform_type=0x0
Mar 18 09:02:20 zaphkiel kernel: [ 29.725049] ALSA patch_realtek.c:1236 SKU: swap=0x0
Mar 18 09:02:20 zaphkiel kernel: [ 29.725051] ALSA patch_realtek.c:1237 SKU: override=0x1
Mar 18 09:02:20 zaphkiel kernel: [ 29.742390] md: bind<sdb4>
Mar 18 09:02:20 zaphkiel kernel: [ 29.779377] IR LIRC bridge handler initialized
Mar 18 09:02:20 zaphkiel kernel: [ 29.857738] tveeprom 1-0050: Hauppauge model 44354, rev C142, serial# 2295831
Mar 18 09:02:20 zaphkiel kernel: [ 29.921654] md: bind<sda1>
Mar 18 09:02:20 zaphkiel kernel: [ 29.946033] tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
Mar 18 09:02:20 zaphkiel kernel: [ 30.020132] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Mar 18 09:02:20 zaphkiel kernel: [ 30.065051] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
Mar 18 09:02:20 zaphkiel kernel: [ 30.103013] tveeprom 1-0050: audio processor is MSP3415 (idx 6)
Mar 18 09:02:20 zaphkiel kernel: [ 30.145378] md: bind<sda2>
Mar 18 09:02:20 zaphkiel kernel: [ 30.174031] tveeprom 1-0050: has radio
Mar 18 09:02:20 zaphkiel kernel: [ 30.221049] bttv0: Hauppauge eeprom indicates model#44354
Mar 18 09:02:20 zaphkiel kernel: [ 30.269011] cdrom: Uniform CD-ROM driver Revision: 3.20
Mar 18 09:02:20 zaphkiel kernel: [ 30.300405] bttv0: tuner type=20
Mar 18 09:02:20 zaphkiel kernel: [ 30.337486] sr 8:0:0:0: Attached scsi CD-ROM sr0
Mar 18 09:02:20 zaphkiel kernel: [ 30.340058] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
Mar 18 09:02:20 zaphkiel kernel: [ 30.389781] i2c-core: driver [msp3400] using legacy suspend method
Mar 18 09:02:20 zaphkiel kernel: [ 30.427379] md: bind<sda4>
Mar 18 09:02:20 zaphkiel kernel: [ 30.447871] i2c-core: driver [msp3400] using legacy resume method
Mar 18 09:02:20 zaphkiel kernel: [ 30.486398] nvidia 0000:02:00.0: setting latency timer to 64
Mar 18 09:02:20 zaphkiel kernel: [ 30.486403] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Mar 18 09:02:20 zaphkiel kernel: [ 30.552124] msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
Mar 18 09:02:20 zaphkiel kernel: [ 30.591822] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.64 Tue Oct 30 11:09:29 PDT 2012
Mar 18 09:02:20 zaphkiel kernel: [ 30.641940] msp3400 1-0040: msp3400 supports nicam, mode is autodetect
Mar 18 09:02:20 zaphkiel kernel: [ 30.683731]
Mar 18 09:02:20 zaphkiel kernel: [ 30.728574] i2c-core: driver [tuner] using legacy suspend method
Mar 18 09:02:20 zaphkiel kernel: [ 30.767893] i2c-core: driver [tuner] using legacy resume method
Mar 18 09:02:20 zaphkiel kernel: [ 30.811881] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
Mar 18 09:02:20 zaphkiel kernel: [ 30.847964] md/raid1:md3: active with 2 out of 2 mirrors
Mar 18 09:02:20 zaphkiel kernel: [ 30.881959] created bitmap (415 pages) for device md3
Mar 18 09:02:20 zaphkiel kernel: [ 30.990096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input5
Mar 18 09:02:20 zaphkiel kernel: [ 31.038390] tuner-simple 1-0061: creating new instance
Mar 18 09:02:20 zaphkiel kernel: [ 31.084560] tuner-simple 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
Mar 18 09:02:20 zaphkiel kernel: [ 31.140892] bttv0: registered device video0
Mar 18 09:02:20 zaphkiel kernel: [ 31.167942] bttv0: registered device vbi0
Mar 18 09:02:20 zaphkiel kernel: [ 31.192924] bttv0: registered device radio0
Mar 18 09:02:20 zaphkiel kernel: [ 31.223065] bttv0: PLL: 28636363 => 35468950 .. ok
Mar 18 09:02:20 zaphkiel kernel: [ 31.312236] AFTER udevadm settle --timeout=60
Mar 18 09:02:20 zaphkiel kernel: [ 31.437261] md3: bitmap initialized from disk: read 26/26 pages, set 1464 of 849320 bits
Mar 18 09:02:20 zaphkiel kernel: [ 31.536642] BEFORE mdadm -IRs
Mar 18 09:02:20 zaphkiel kernel: [ 31.562744] md3: detected capacity change from 0 to 890575601664
Mar 18 09:02:20 zaphkiel kernel: [ 31.645517] md/raid1:md0: active with 1 out of 2 mirrors
Mar 18 09:02:20 zaphkiel kernel: [ 31.709880] md3: unknown partition table
Mar 18 09:02:20 zaphkiel kernel: [ 31.734035] md: bind<sdb2>
Mar 18 09:02:20 zaphkiel kernel: [ 31.753744] created bitmap (6 pages) for device md0
Mar 18 09:02:20 zaphkiel kernel: [ 31.793486] md0: bitmap initialized from disk: read 1/1 pages, set 0 of 12047 bits
Mar 18 09:02:20 zaphkiel kernel: [ 31.874934] md/raid1:md1: active with 2 out of 2 mirrors
Mar 18 09:02:20 zaphkiel kernel: [ 31.907025] md0: detected capacity change from 0 to 98689024
Mar 18 09:02:20 zaphkiel kernel: [ 32.004102] created bitmap (8 pages) for device md1
Mar 18 09:02:20 zaphkiel kernel: [ 32.078506] md1: bitmap initialized from disk: read 1/1 pages, set 0 of 16379 bits
Mar 18 09:02:20 zaphkiel kernel: [ 32.146550] md0: unknown partition table
Mar 18 09:02:20 zaphkiel kernel: [ 32.170680] md1: detected capacity change from 0 to 2146783232
Mar 18 09:02:20 zaphkiel kernel: [ 32.209513] AFTER mdadm -IRs
Mar 18 09:02:20 zaphkiel kernel: [ 32.452210] md1: unknown partition table
Mar 18 09:02:20 zaphkiel kernel: [ 32.783780] Adding 2096464k swap on /dev/md1. Priority:-1 extents:1 across:2096464k
Mar 18 09:02:20 zaphkiel kernel: [ 34.746669] AFTER mdadm -Asc
Mar 18 09:02:20 zaphkiel kernel: [ 36.399439] XFS (md3): Mounting Filesystem
Mar 18 09:02:20 zaphkiel kernel: [ 36.943112] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
Mar 18 09:02:20 zaphkiel kernel: [ 37.014070] XFS (md3): Ending clean mount
Mar 18 09:02:20 zaphkiel kernel: [ 37.257681] EXT4-fs (md0): mounted filesystem without journal. Opts: acl,user_xattr
Thanks,
Pete
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-03-18 11:20 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 22:14 Persistent failures with simple md setup Hans-Peter Jansen
2013-01-30 9:07 ` Sebastian Riemer
2013-01-30 17:12 ` Hans-Peter Jansen
2013-02-04 20:43 ` Hans-Peter Jansen
2013-02-05 3:44 ` NeilBrown
2013-02-27 17:01 ` Hans-Peter Jansen
2013-02-28 3:40 ` NeilBrown
2013-02-28 10:49 ` Hans-Peter Jansen
2013-02-28 21:25 ` NeilBrown
2013-02-28 22:16 ` Hans-Peter Jansen
[not found] ` <4291349.FrQcKOnicQ@xrated>
2013-03-03 23:33 ` NeilBrown
2013-03-13 0:52 ` NeilBrown
2013-03-15 22:43 ` Hans-Peter Jansen
2013-03-18 11:20 ` Hans-Peter Jansen [this message]
2013-03-21 3:24 ` NeilBrown
2013-04-10 13:28 ` Hans-Peter Jansen
2013-04-10 13:44 ` Hans-Peter Jansen
2013-04-11 7:33 ` NeilBrown
2013-01-30 9:20 ` Roy Sigurd Karlsbakk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2777026.gm19DAWULs@xrated \
--to=hpj@urpla.net \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.