From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, hverkuil@xs4all.nl
Subject: Re: [PATCH v3 3/3] smiapp: Implement the test pattern control
Date: Thu, 29 May 2014 16:54:55 +0200 [thread overview]
Message-ID: <2777039.3n5AP3eAS8@avalon> (raw)
In-Reply-To: <1401374448-30411-4-git-send-email-sakari.ailus@linux.intel.com>
Hi Sakari,
Thank you for the patch.
On Thursday 29 May 2014 17:40:48 Sakari Ailus wrote:
> Add support for the V4L2_CID_TEST_PATTERN control. When the solid colour
> mode is selected, additional controls become available for setting the
> solid four solid colour components.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> drivers/media/i2c/smiapp/smiapp-core.c | 84 +++++++++++++++++++++++++++++--
> drivers/media/i2c/smiapp/smiapp.h | 4 ++
> 2 files changed, 84 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/smiapp/smiapp-core.c
> b/drivers/media/i2c/smiapp/smiapp-core.c index 446c82c..dc82adb 100644
> --- a/drivers/media/i2c/smiapp/smiapp-core.c
> +++ b/drivers/media/i2c/smiapp/smiapp-core.c
> @@ -404,6 +404,16 @@ static void smiapp_update_mbus_formats(struct
> smiapp_sensor *sensor) pixel_order_str[pixel_order]);
> }
>
> +static const char * const smiapp_test_patterns[] = {
> + "Disabled",
> + "Solid Colour",
> + "Eight Vertical Colour Bars",
> + "Colour Bars With Fade to Grey",
> + "Pseudorandom Sequence (PN9)",
> +};
> +
> +static const struct v4l2_ctrl_ops smiapp_ctrl_ops;
Is this needed ?
> +
> static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct smiapp_sensor *sensor =
> @@ -477,6 +487,35 @@ static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
>
> return smiapp_pll_update(sensor);
>
> + case V4L2_CID_TEST_PATTERN: {
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++)
> + v4l2_ctrl_activate(
> + sensor->test_data[i],
> + ctrl->val ==
> + V4L2_SMIAPP_TEST_PATTERN_MODE_SOLID_COLOUR);
> +
> + return smiapp_write(
> + sensor, SMIAPP_REG_U16_TEST_PATTERN_MODE, ctrl->val);
> + }
> +
> + case V4L2_CID_TEST_PATTERN_RED:
> + return smiapp_write(
> + sensor, SMIAPP_REG_U16_TEST_DATA_RED, ctrl->val);
> +
> + case V4L2_CID_TEST_PATTERN_GREENR:
> + return smiapp_write(
> + sensor, SMIAPP_REG_U16_TEST_DATA_GREENR, ctrl->val);
> +
> + case V4L2_CID_TEST_PATTERN_BLUE:
> + return smiapp_write(
> + sensor, SMIAPP_REG_U16_TEST_DATA_BLUE, ctrl->val);
> +
> + case V4L2_CID_TEST_PATTERN_GREENB:
> + return smiapp_write(
> + sensor, SMIAPP_REG_U16_TEST_DATA_GREENB, ctrl->val);
> +
> default:
> return -EINVAL;
> }
> @@ -489,10 +528,10 @@ static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
> static int smiapp_init_controls(struct smiapp_sensor *sensor)
> {
> struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
> - unsigned int max;
> + unsigned int max, i;
> int rval;
>
> - rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
> + rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 12);
> if (rval)
> return rval;
> sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
> @@ -535,6 +574,18 @@ static int smiapp_init_controls(struct smiapp_sensor
> *sensor) &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
> V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
>
> + v4l2_ctrl_new_std_menu_items(&sensor->pixel_array->ctrl_handler,
> + &smiapp_ctrl_ops, V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(smiapp_test_patterns) - 1,
> + 0, 0, smiapp_test_patterns);
> +
> + for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++)
> + sensor->test_data[i] =
> + v4l2_ctrl_new_std(&sensor->pixel_array->ctrl_handler,
> + &smiapp_ctrl_ops,
> + V4L2_CID_TEST_PATTERN_RED + i,
> + 0, 0, 1, 0);
> +
> if (sensor->pixel_array->ctrl_handler.error) {
> dev_err(&client->dev,
> "pixel array controls initialization failed (%d)\n",
> @@ -543,6 +594,14 @@ static int smiapp_init_controls(struct smiapp_sensor
> *sensor) goto error;
> }
>
> + for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++) {
> + struct v4l2_ctrl *ctrl = sensor->test_data[i];
> +
> + ctrl->maximum =
> + ctrl->default_value =
> + ctrl->cur.val = (1 << sensor->csi_format->width) - 1;
I think multiple assignments on the same line are discouraged.
Furthermore, couldn't you move this above and use the right values directly
when creating the controls ?
> + }
> +
> sensor->pixel_array->sd.ctrl_handler =
> &sensor->pixel_array->ctrl_handler;
>
> @@ -1670,17 +1729,34 @@ static int smiapp_set_format(struct v4l2_subdev
> *subdev, if (fmt->pad == ssd->source_pad) {
> u32 code = fmt->format.code;
> int rval = __smiapp_get_format(subdev, fh, fmt);
> + bool range_changed = false;
> + unsigned int i;
>
> if (!rval && subdev == &sensor->src->sd) {
> const struct smiapp_csi_data_format *csi_format =
> smiapp_validate_csi_data_format(sensor, code);
> - if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +
> + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> + if (csi_format->width !=
> + sensor->csi_format->width)
> + range_changed = true;
> +
> sensor->csi_format = csi_format;
> + }
> +
> fmt->format.code = csi_format->code;
> }
>
> mutex_unlock(&sensor->mutex);
> - return rval;
> + if (rval || !range_changed)
> + return rval;
> +
> + for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++)
> + v4l2_ctrl_modify_range(
> + sensor->test_data[i],
> + 0, (1 << sensor->csi_format->width) - 1, 1, 0);
> +
> + return 0;
> }
>
> /* Sink pad. Width and height are changeable here. */
> diff --git a/drivers/media/i2c/smiapp/smiapp.h
> b/drivers/media/i2c/smiapp/smiapp.h index 7cc5aae..874b49f 100644
> --- a/drivers/media/i2c/smiapp/smiapp.h
> +++ b/drivers/media/i2c/smiapp/smiapp.h
> @@ -54,6 +54,8 @@
> (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \
> + (clk) / 1000 - 1) / ((clk) / 1000))
>
> +#define SMIAPP_COLOUR_COMPONENTS 4
> +
> #include "smiapp-limits.h"
>
> struct smiapp_quirk;
> @@ -241,6 +243,8 @@ struct smiapp_sensor {
> /* src controls */
> struct v4l2_ctrl *link_freq;
> struct v4l2_ctrl *pixel_rate_csi;
> + /* test pattern colour components */
> + struct v4l2_ctrl *test_data[SMIAPP_COLOUR_COMPONENTS];
> };
>
> #define to_smiapp_subdev(_sd) \
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-05-29 14:54 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-29 14:40 [PATCH v3 0/3] smiapp test pattern support Sakari Ailus
2014-05-29 14:40 ` [PATCH v3 1/3] v4l: Add test pattern colour component controls Sakari Ailus
2014-05-29 14:47 ` Laurent Pinchart
2014-05-29 14:58 ` Sakari Ailus
2014-05-29 15:01 ` Laurent Pinchart
2014-05-30 12:28 ` Hans Verkuil
2014-06-03 12:21 ` Laurent Pinchart
2014-06-03 12:27 ` Sakari Ailus
2014-06-03 12:42 ` Hans Verkuil
2014-06-10 12:15 ` Hans Verkuil
2014-05-29 14:40 ` [PATCH v3 2/3] smiapp: Add driver-specific test pattern menu item definitions Sakari Ailus
2014-05-29 14:48 ` Laurent Pinchart
2014-05-29 15:08 ` Sakari Ailus
2014-06-10 12:16 ` Hans Verkuil
2014-06-10 15:57 ` Prabhakar Lad
2014-06-11 6:34 ` Sakari Ailus
2014-06-11 6:36 ` [PATCH v3.1 2/4] " Sakari Ailus
2014-06-11 7:58 ` Prabhakar Lad
2014-05-29 14:40 ` [PATCH v3 3/3] smiapp: Implement the test pattern control Sakari Ailus
2014-05-29 14:54 ` Laurent Pinchart [this message]
2014-05-29 15:01 ` Sakari Ailus
2014-05-29 15:14 ` Sakari Ailus
2014-05-29 15:16 ` [PATCH v3.1 " Sakari Ailus
2014-07-10 14:16 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2777039.3n5AP3eAS8@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.