From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
soc-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [GIT PULL 2/2] Rockchip dt64 for 5.7
Date: Tue, 17 Mar 2020 02:02:19 +0100 [thread overview]
Message-ID: <27799037.pT45f1LVdF@phil> (raw)
In-Reply-To: <7846023.TtVhTo4ACP@phil>
The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:
Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v5.7-rockchip-dts64-1
for you to fetch changes up to 68c33366a95664ab6afafd9b0ed591597890ede7:
arm64: dts: rockchip: Add Hugsun X99 power led (2020-03-17 01:49:03 +0100)
----------------------------------------------------------------
Support for the rk3399-based Pinebook Pro, eDP support and power-tree for
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.
----------------------------------------------------------------
Alexis Ballier (2):
arm64: dts: rockchip: Add ethernet phy to rk3399-orangepi
arm64: dts: rockchip: Explicitly pinmux the regulator configuration GPIOs on rk3399-orangepi
Andy Yan (4):
arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb
arm64: dts: rockchip: Add pmic dt tree for rk3399 evb
arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb
arm64: dts: rockchip: Enable eDP display on rk3399 evb
Carlos de Paula (1):
arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
Emmanuel Vadot (1):
dt-bindings: Add doc for Pine64 Pinebook Pro
Enric Balletbo i Serra (1):
arm64: dts: rk3399: Remove extcon unit address and extcon-cells from Gru
Heiko Stuebner (1):
arm64: dts: rockchip: fix px30 lvds ports
Johan Jonker (13):
arm64: dts: rockchip: fix cpu compatible property for rk3308
arm64: dts: remove g-use-dma from rockchip usb nodes
arm64: dts: rockchip: fix compatible property for Radxa ROCK Pi N10
arm64: dts: rockchip: fix compatible property for rk3399-evb
arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99
arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30
arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB
arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma
arm64: dts: rockchip: replace clock-freq-min-max by max-frequency
arm64: dts: add bus to rockchip amba nodenames
arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator
arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
Robin Murphy (1):
arm64: dts: rockchip: Describe RK3328 GPIO_MUTE users
Tobias Schramm (1):
arm64: dts: rockchip: Add initial support for Pinebook Pro
Vivek Unune (2):
arm64: dts: rockchip: Add Hugsun X99 IR receiver
arm64: dts: rockchip: Add Hugsun X99 power led
.../devicetree/bindings/arm/rockchip.yaml | 5 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/px30.dtsi | 32 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 10 +-
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 7 +-
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 1 -
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 3 +-
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 270 ++++-
.../boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 39 +-
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 43 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 2 +-
.../dts/rockchip/rk3399-sapphire-excavator.dts | 2 -
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +-
.../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 3 +-
20 files changed, 1470 insertions(+), 67 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
WARNING: multiple messages have this Message-ID (diff)
From: Heiko Stuebner <heiko@sntech.de>
To: arm@kernel.org
Cc: linux-rockchip@lists.infradead.org, soc@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/2] Rockchip dt64 for 5.7
Date: Tue, 17 Mar 2020 02:02:19 +0100 [thread overview]
Message-ID: <27799037.pT45f1LVdF@phil> (raw)
In-Reply-To: <7846023.TtVhTo4ACP@phil>
The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:
Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v5.7-rockchip-dts64-1
for you to fetch changes up to 68c33366a95664ab6afafd9b0ed591597890ede7:
arm64: dts: rockchip: Add Hugsun X99 power led (2020-03-17 01:49:03 +0100)
----------------------------------------------------------------
Support for the rk3399-based Pinebook Pro, eDP support and power-tree for
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.
----------------------------------------------------------------
Alexis Ballier (2):
arm64: dts: rockchip: Add ethernet phy to rk3399-orangepi
arm64: dts: rockchip: Explicitly pinmux the regulator configuration GPIOs on rk3399-orangepi
Andy Yan (4):
arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb
arm64: dts: rockchip: Add pmic dt tree for rk3399 evb
arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb
arm64: dts: rockchip: Enable eDP display on rk3399 evb
Carlos de Paula (1):
arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
Emmanuel Vadot (1):
dt-bindings: Add doc for Pine64 Pinebook Pro
Enric Balletbo i Serra (1):
arm64: dts: rk3399: Remove extcon unit address and extcon-cells from Gru
Heiko Stuebner (1):
arm64: dts: rockchip: fix px30 lvds ports
Johan Jonker (13):
arm64: dts: rockchip: fix cpu compatible property for rk3308
arm64: dts: remove g-use-dma from rockchip usb nodes
arm64: dts: rockchip: fix compatible property for Radxa ROCK Pi N10
arm64: dts: rockchip: fix compatible property for rk3399-evb
arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99
arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30
arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB
arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma
arm64: dts: rockchip: replace clock-freq-min-max by max-frequency
arm64: dts: add bus to rockchip amba nodenames
arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator
arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
Robin Murphy (1):
arm64: dts: rockchip: Describe RK3328 GPIO_MUTE users
Tobias Schramm (1):
arm64: dts: rockchip: Add initial support for Pinebook Pro
Vivek Unune (2):
arm64: dts: rockchip: Add Hugsun X99 IR receiver
arm64: dts: rockchip: Add Hugsun X99 power led
.../devicetree/bindings/arm/rockchip.yaml | 5 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/px30.dtsi | 32 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 10 +-
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 7 +-
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 1 -
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 3 +-
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 270 ++++-
.../boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 39 +-
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 43 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 2 +-
.../dts/rockchip/rk3399-sapphire-excavator.dts | 2 -
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +-
.../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 3 +-
20 files changed, 1470 insertions(+), 67 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-17 1:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 1:01 [GIT PULL 1/2] Rockchip dt32 for 5.7 Heiko Stuebner
2020-03-17 1:01 ` Heiko Stuebner
2020-03-17 1:02 ` Heiko Stuebner [this message]
2020-03-17 1:02 ` [GIT PULL 2/2] Rockchip dt64 " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=27799037.pT45f1LVdF@phil \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=soc-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.