* usb-serial generic AMD DBAu1200
@ 2006-02-15 10:57 The Mole
0 siblings, 0 replies; only message in thread
From: The Mole @ 2006-02-15 10:57 UTC (permalink / raw)
To: linux-mips
Hi,
I'm currently experimenting with an AMD DBAu1200 devboard and the kernel AMD provided with it (a 2.6.11 derivative...). I only intend to use the usb ports actually... don't care much about the rest...
The problem I'm having is the following:
I succesfully compiled usb-serial as a module (with generic support) and the module loads fine (with the vendor en product parameters). If I however plugin the USB device with said vendor en product id's, the driver does not 'attach' itself to the device. The system recognises a new usb device, the driver is loaded fine... the interaction between both doesn't seem to be happening at all though...
Has anyone experienced this before? Any ideas are welcome...
Thanks,
Danny
-----------------------------------------------------
Mail.be, WebMail and Virtual Office
http://www.mail.be
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-02-15 10:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-15 10:57 usb-serial generic AMD DBAu1200 The Mole
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.