From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Markus Reichl <m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
Date: Thu, 09 Jan 2020 00:30:05 +0100 [thread overview]
Message-ID: <2818372.Uxc4pq5UrR@phil> (raw)
In-Reply-To: <20200106211633.2882-6-m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
Am Montag, 6. Januar 2020, 22:16:28 CET schrieb Markus Reichl:
> The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply.
> This supplies 5V only in default state after booting.
> Now we can control the output voltage via I2C interface.
> Add a node for the driver to reach 12V.
>
> Signed-off-by: Markus Reichl <m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
applied for 5.6 now that the driver-side got merged
Thanks
Heiko
WARNING: multiple messages have this Message-ID (diff)
From: Heiko Stuebner <heiko@sntech.de>
To: Markus Reichl <m.reichl@fivetechno.de>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
Mark Brown <broonie@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
Date: Thu, 09 Jan 2020 00:30:05 +0100 [thread overview]
Message-ID: <2818372.Uxc4pq5UrR@phil> (raw)
In-Reply-To: <20200106211633.2882-6-m.reichl@fivetechno.de>
Am Montag, 6. Januar 2020, 22:16:28 CET schrieb Markus Reichl:
> The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply.
> This supplies 5V only in default state after booting.
> Now we can control the output voltage via I2C interface.
> Add a node for the driver to reach 12V.
>
> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
applied for 5.6 now that the driver-side got merged
Thanks
Heiko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Heiko Stuebner <heiko@sntech.de>
To: Markus Reichl <m.reichl@fivetechno.de>
Cc: linux-rockchip@lists.infradead.org,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
Date: Thu, 09 Jan 2020 00:30:05 +0100 [thread overview]
Message-ID: <2818372.Uxc4pq5UrR@phil> (raw)
In-Reply-To: <20200106211633.2882-6-m.reichl@fivetechno.de>
Am Montag, 6. Januar 2020, 22:16:28 CET schrieb Markus Reichl:
> The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply.
> This supplies 5V only in default state after booting.
> Now we can control the output voltage via I2C interface.
> Add a node for the driver to reach 12V.
>
> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
applied for 5.6 now that the driver-side got merged
Thanks
Heiko
next prev parent reply other threads:[~2020-01-08 23:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 21:16 [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Markus Reichl
2020-01-06 21:16 ` Markus Reichl
2020-01-06 21:16 ` [PATCH 1/5] regulator: mp8859: add driver Markus Reichl
2020-01-06 21:16 ` Markus Reichl
2020-01-08 15:59 ` Applied "regulator: mp8859: add driver" to the regulator tree Mark Brown
2020-01-08 15:59 ` Mark Brown
2020-01-08 15:59 ` Mark Brown
2020-01-06 21:16 ` [PATCH 2/5] regulator: mp8859: add config option and build entry Markus Reichl
2020-01-06 21:16 ` Markus Reichl
[not found] ` <20200106211633.2882-3-m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
2020-01-06 21:22 ` Heiko Stübner
2020-01-06 21:22 ` Heiko Stübner
2020-01-06 21:22 ` Heiko Stübner
2020-01-07 7:29 ` Markus Reichl
2020-01-07 7:29 ` Markus Reichl
2020-01-08 15:58 ` Applied "regulator: mp8859: add config option and build entry" to the regulator tree Mark Brown
2020-01-08 15:58 ` Mark Brown
2020-01-08 15:58 ` Mark Brown
2020-01-06 21:16 ` [PATCH 3/5] dt-bindings: add vendor Monolithic Power Systems Markus Reichl
2020-01-06 21:16 ` Markus Reichl
2020-01-08 20:32 ` Rob Herring
2020-01-08 20:32 ` Rob Herring
2020-01-08 20:32 ` Rob Herring
2020-01-06 21:16 ` [PATCH 4/5] dt-bindings: regulator: add MPS mp8859 voltage regulator Markus Reichl
2020-01-06 21:16 ` Markus Reichl
[not found] ` <20200106211633.2882-5-m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
2020-01-08 15:58 ` Applied "regulator: bindings: add MPS mp8859 voltage regulator" to the regulator tree Mark Brown
2020-01-08 15:58 ` Mark Brown
2020-01-08 15:58 ` Mark Brown
2020-01-06 21:16 ` [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Markus Reichl
2020-01-06 21:16 ` Markus Reichl
[not found] ` <20200106211633.2882-6-m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org>
2020-01-08 23:30 ` Heiko Stuebner [this message]
2020-01-08 23:30 ` Heiko Stuebner
2020-01-08 23:30 ` Heiko Stuebner
-- strict thread matches above, loose matches on Subject: below --
2020-01-04 15:32 [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Markus Reichl
2020-01-04 15:32 ` [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Markus Reichl
2020-01-04 15:32 ` Markus Reichl
2020-01-04 21:23 ` Heiko Stuebner
2020-01-04 21:23 ` Heiko Stuebner
2020-01-05 9:16 ` Markus Reichl
2020-01-05 9:16 ` Markus Reichl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2818372.Uxc4pq5UrR@phil \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=m.reichl-SRyzfwRm/0rPTwkrwQOX7A@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.