All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@siol.net>
To: narmstrong@baylibre.com
Cc: maxime.ripard@free-electrons.com, airlied@linux.ie,
	robh+dt@kernel.org, mark.rutland@arm.com, wens@csie.org,
	architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, mturquette@baylibre.com,
	sboyd@codeaurora.org, Jose.Abreu@synopsys.com,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
Date: Fri, 12 Jan 2018 21:42:12 +0100	[thread overview]
Message-ID: <2850049.ORu4oj41BJ@jernej-laptop> (raw)
In-Reply-To: <20180110192512.19684-5-jernej.skrabec@siol.net>

Hi all,

Dne sreda, 10. januar 2018 ob 20:25:04 CET je Jernej Skrabec napisal(a):
> Parts of PHY code could be useful also for custom PHYs. For example,
> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> with few additional memory mapped registers, so most of the Synopsys PHY
> related code could be reused.
> 
> Functions exported here are actually not specific to Synopsys PHYs but
> to DWC HDMI controller PHY interface. This means that even if the PHY is
> completely custom, i.e. not designed by Synopsys, exported functions can
> be useful.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44
> +++++++++++++++++++++---------- include/drm/bridge/dw_hdmi.h              |
> 11 ++++++++
>  2 files changed, 41 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 7ca14d7325b5..7d80f4b56683 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi
> *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
>  }
> 
> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
> 
> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
> 
>  static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
>  {
> @@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct
> dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
>  }
> 
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
> +{
> +	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> +	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> +	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);

I just noticed that meson dw hdmi driver uses function with the same name, 
which break compilation. Is it ok if I rename meson specific reset to 
meson_dw_hdmi_phy_reset()?

Best regards,
Jernej

> +
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
> +{
> +	hdmi_phy_test_clear(hdmi, 1);
> +	hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
> +	hdmi_phy_test_clear(hdmi, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
> +
>  static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
>  {
>  	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> @@ -1203,16 +1221,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
>  	if (phy->has_svsret)
>  		dw_hdmi_phy_enable_svsret(hdmi, 1);
> 
> -	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> -	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> -	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +	dw_hdmi_phy_reset(hdmi);
> 
>  	hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
> 
> -	hdmi_phy_test_clear(hdmi, 1);
> -	hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> -		    HDMI_PHY_I2CM_SLAVE_ADDR);
> -	hdmi_phy_test_clear(hdmi, 0);
> +	dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
> 
>  	/* Write to the PHY as configured by the platform */
>  	if (pdata->configure_phy)
> @@ -1251,15 +1264,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi
> *hdmi, void *data) dw_hdmi_phy_power_off(hdmi);
>  }
> 
> -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> -						      void *data)
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data)
>  {
>  	return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
>  		connector_status_connected : connector_status_disconnected;
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
> 
> -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> -				   bool force, bool disabled, bool rxsense)
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense)
>  {
>  	u8 old_mask = hdmi->phy_mask;
> 
> @@ -1271,8 +1285,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi
> *hdmi, void *data, if (old_mask != hdmi->phy_mask)
>  		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
> 
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
>  {
>  	/*
>  	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> @@ -1291,6 +1306,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi
> *hdmi, void *data) hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD |
> HDMI_IH_PHY_STAT0_RX_SENSE), HDMI_IH_MUTE_PHY_STAT0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
> 
>  static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
>  	.init = dw_hdmi_phy_init,
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 182f83283e24..4a35e5065f6f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -157,7 +157,18 @@ void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
>  void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> 
>  /* PHY configuration */
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
>  void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
>  			   unsigned char addr);
> 
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data);
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense);
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> +
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
> +
>  #endif /* __IMX_HDMI_H__ */
> --
> 2.15.1

WARNING: multiple messages have this Message-ID (diff)
From: jernej.skrabec@siol.net (Jernej Škrabec)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
Date: Fri, 12 Jan 2018 21:42:12 +0100	[thread overview]
Message-ID: <2850049.ORu4oj41BJ@jernej-laptop> (raw)
In-Reply-To: <20180110192512.19684-5-jernej.skrabec@siol.net>

Hi all,

Dne sreda, 10. januar 2018 ob 20:25:04 CET je Jernej Skrabec napisal(a):
> Parts of PHY code could be useful also for custom PHYs. For example,
> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> with few additional memory mapped registers, so most of the Synopsys PHY
> related code could be reused.
> 
> Functions exported here are actually not specific to Synopsys PHYs but
> to DWC HDMI controller PHY interface. This means that even if the PHY is
> completely custom, i.e. not designed by Synopsys, exported functions can
> be useful.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44
> +++++++++++++++++++++---------- include/drm/bridge/dw_hdmi.h              |
> 11 ++++++++
>  2 files changed, 41 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 7ca14d7325b5..7d80f4b56683 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi
> *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
>  }
> 
> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
> 
> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
> 
>  static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
>  {
> @@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct
> dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
>  }
> 
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
> +{
> +	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> +	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> +	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);

I just noticed that meson dw hdmi driver uses function with the same name, 
which break compilation. Is it ok if I rename meson specific reset to 
meson_dw_hdmi_phy_reset()?

Best regards,
Jernej

> +
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
> +{
> +	hdmi_phy_test_clear(hdmi, 1);
> +	hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
> +	hdmi_phy_test_clear(hdmi, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
> +
>  static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
>  {
>  	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> @@ -1203,16 +1221,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
>  	if (phy->has_svsret)
>  		dw_hdmi_phy_enable_svsret(hdmi, 1);
> 
> -	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> -	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> -	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +	dw_hdmi_phy_reset(hdmi);
> 
>  	hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
> 
> -	hdmi_phy_test_clear(hdmi, 1);
> -	hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> -		    HDMI_PHY_I2CM_SLAVE_ADDR);
> -	hdmi_phy_test_clear(hdmi, 0);
> +	dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
> 
>  	/* Write to the PHY as configured by the platform */
>  	if (pdata->configure_phy)
> @@ -1251,15 +1264,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi
> *hdmi, void *data) dw_hdmi_phy_power_off(hdmi);
>  }
> 
> -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> -						      void *data)
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data)
>  {
>  	return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
>  		connector_status_connected : connector_status_disconnected;
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
> 
> -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> -				   bool force, bool disabled, bool rxsense)
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense)
>  {
>  	u8 old_mask = hdmi->phy_mask;
> 
> @@ -1271,8 +1285,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi
> *hdmi, void *data, if (old_mask != hdmi->phy_mask)
>  		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
> 
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
>  {
>  	/*
>  	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> @@ -1291,6 +1306,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi
> *hdmi, void *data) hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD |
> HDMI_IH_PHY_STAT0_RX_SENSE), HDMI_IH_MUTE_PHY_STAT0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
> 
>  static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
>  	.init = dw_hdmi_phy_init,
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 182f83283e24..4a35e5065f6f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -157,7 +157,18 @@ void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
>  void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> 
>  /* PHY configuration */
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
>  void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
>  			   unsigned char addr);
> 
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data);
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense);
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> +
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
> +
>  #endif /* __IMX_HDMI_H__ */
> --
> 2.15.1

WARNING: multiple messages have this Message-ID (diff)
From: "Jernej Škrabec" <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
To: narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
Cc: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	airlied-cv59FeDIM0c@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
	Laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org,
	mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
	sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	Jose.Abreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
Date: Fri, 12 Jan 2018 21:42:12 +0100	[thread overview]
Message-ID: <2850049.ORu4oj41BJ@jernej-laptop> (raw)
In-Reply-To: <20180110192512.19684-5-jernej.skrabec-gGgVlfcn5nU@public.gmane.org>

Hi all,

Dne sreda, 10. januar 2018 ob 20:25:04 CET je Jernej Skrabec napisal(a):
> Parts of PHY code could be useful also for custom PHYs. For example,
> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> with few additional memory mapped registers, so most of the Synopsys PHY
> related code could be reused.
> 
> Functions exported here are actually not specific to Synopsys PHYs but
> to DWC HDMI controller PHY interface. This means that even if the PHY is
> completely custom, i.e. not designed by Synopsys, exported functions can
> be useful.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44
> +++++++++++++++++++++---------- include/drm/bridge/dw_hdmi.h              |
> 11 ++++++++
>  2 files changed, 41 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 7ca14d7325b5..7d80f4b56683 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi
> *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
>  }
> 
> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
> 
> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
>  {
>  	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
>  			 HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
> 
>  static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
>  {
> @@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct
> dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
>  }
> 
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
> +{
> +	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> +	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> +	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);

I just noticed that meson dw hdmi driver uses function with the same name, 
which break compilation. Is it ok if I rename meson specific reset to 
meson_dw_hdmi_phy_reset()?

Best regards,
Jernej

> +
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
> +{
> +	hdmi_phy_test_clear(hdmi, 1);
> +	hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
> +	hdmi_phy_test_clear(hdmi, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
> +
>  static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
>  {
>  	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> @@ -1203,16 +1221,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
>  	if (phy->has_svsret)
>  		dw_hdmi_phy_enable_svsret(hdmi, 1);
> 
> -	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
> -	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> -	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +	dw_hdmi_phy_reset(hdmi);
> 
>  	hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
> 
> -	hdmi_phy_test_clear(hdmi, 1);
> -	hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> -		    HDMI_PHY_I2CM_SLAVE_ADDR);
> -	hdmi_phy_test_clear(hdmi, 0);
> +	dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
> 
>  	/* Write to the PHY as configured by the platform */
>  	if (pdata->configure_phy)
> @@ -1251,15 +1264,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi
> *hdmi, void *data) dw_hdmi_phy_power_off(hdmi);
>  }
> 
> -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> -						      void *data)
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data)
>  {
>  	return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
>  		connector_status_connected : connector_status_disconnected;
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
> 
> -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> -				   bool force, bool disabled, bool rxsense)
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense)
>  {
>  	u8 old_mask = hdmi->phy_mask;
> 
> @@ -1271,8 +1285,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi
> *hdmi, void *data, if (old_mask != hdmi->phy_mask)
>  		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
> 
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
>  {
>  	/*
>  	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> @@ -1291,6 +1306,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi
> *hdmi, void *data) hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD |
> HDMI_IH_PHY_STAT0_RX_SENSE), HDMI_IH_MUTE_PHY_STAT0);
>  }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
> 
>  static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
>  	.init = dw_hdmi_phy_init,
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 182f83283e24..4a35e5065f6f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -157,7 +157,18 @@ void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
>  void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> 
>  /* PHY configuration */
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
>  void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
>  			   unsigned char addr);
> 
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> +					       void *data);
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +			    bool force, bool disabled, bool rxsense);
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> +
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
> +
>  #endif /* __IMX_HDMI_H__ */
> --
> 2.15.1




--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2018-01-12 20:42 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-10 19:25 [PATCH v2 00/12] drm/sun4i: Add A83T HDMI support Jernej Skrabec
2018-01-10 19:25 ` Jernej Skrabec
2018-01-10 19:25 ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 01/12] clk: sunxi-ng: Mask nkmp factors when setting register Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 02/12] clk: sunxi-ng: Change formula for NKMP PLLs Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 03/12] drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32a Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-12 20:42   ` Jernej Škrabec [this message]
2018-01-12 20:42     ` Jernej Škrabec
2018-01-12 20:42     ` Jernej Škrabec
2018-01-15 15:13     ` Neil Armstrong
2018-01-15 15:13       ` Neil Armstrong
2018-01-12 23:04   ` Laurent Pinchart
2018-01-12 23:04     ` Laurent Pinchart
2018-01-12 23:04     ` Laurent Pinchart
2018-01-10 19:25 ` [PATCH v2 05/12] drm/bridge/synopsys: dw-hdmi: Add deinit callback Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-12  6:12   ` Chen-Yu Tsai
2018-01-12  6:12     ` Chen-Yu Tsai
2018-01-10 19:25 ` [PATCH v2 06/12] dt-bindings: display: sun4i-drm: Add A83T HDMI pipeline Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 07/12] drm/sun4i: Add has_channel_0 TCON quirk Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-11 12:18   ` Maxime Ripard
2018-01-11 12:18     ` Maxime Ripard
2018-01-10 19:25 ` [PATCH v2 08/12] drm/sun4i: Add support for A83T second TCON Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-11 12:18   ` Maxime Ripard
2018-01-11 12:18     ` Maxime Ripard
2018-01-11 12:18     ` Maxime Ripard
2018-01-10 19:25 ` [PATCH v2 09/12] drm/sun4i: Add support for A83T second DE2 mixer Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 10/12] drm/sun4i: Implement A83T HDMI driver Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 11/12] ARM: dts: sun8i: a83t: Add HDMI display pipeline Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25 ` [PATCH v2 12/12] ARM: dts: sun8i: a83t: Enable HDMI on BananaPi M3 Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec
2018-01-10 19:25   ` Jernej Skrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2850049.ORu4oj41BJ@jernej-laptop \
    --to=jernej.skrabec@siol.net \
    --cc=Jose.Abreu@synopsys.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.