* Audio starts working several hours after starting Windows Vista guest
@ 2012-09-30 7:34 Dirk Heinrichs
2012-10-01 6:54 ` Veruca Salt
2012-10-01 14:23 ` Paolo Bonzini
0 siblings, 2 replies; 5+ messages in thread
From: Dirk Heinrichs @ 2012-09-30 7:34 UTC (permalink / raw)
To: kvm
[-- Attachment #1: Type: text/plain, Size: 1360 bytes --]
Hello,
since a week or two, I have a very strange problem with audio output on a
Windows Vista guest. Right after booting the guest, audio does not work. If I
leave the guest running for some hours (don't know how many, I usually try
again next day), audio output works fine.
I'm using es1370 emulation, but I get the same results with the other
alternatives, too.
Guest: Windows Vista SP1 32bit
Host: Ubuntu 12.10 64bit
% dpkg --list|grep -e kvm -e qemu
ii kvm-ipxe 1.0.0+git-3.55f6c88-0ubuntu5
all PXE ROM's for KVM
ii qemu-common 1.2.0+noroms-0ubuntu2
all qemu common functionality (bios, documentation, etc)
ii qemu-kvm 1.2.0+noroms-0ubuntu2
amd64 Full virtualization on supported hardware
ii qemu-kvm-spice 1.2.0-2012.09-0ubuntu1
amd64 Full virtualization on amd64 hardware
ii qemu-utils 1.2.0+noroms-0ubuntu2
amd64 qemu utilities
Is this a known problem? What could I do to resolve it?
Thanks...
Dirk
--
Dirk Heinrichs <dirk.heinrichs@altum.de>
Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
GPG Public Key C2E467BB | Jabber: dirk.heinrichs@altum.de
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: Audio starts working several hours after starting Windows Vista guest
2012-09-30 7:34 Audio starts working several hours after starting Windows Vista guest Dirk Heinrichs
@ 2012-10-01 6:54 ` Veruca Salt
2012-10-01 7:06 ` Dirk Heinrichs
2012-10-01 14:23 ` Paolo Bonzini
1 sibling, 1 reply; 5+ messages in thread
From: Veruca Salt @ 2012-10-01 6:54 UTC (permalink / raw)
To: dirk.heinrichs, kvm
Dirk,
sometimes when windows detects new hardware on a write-protected image, it needs to reinstall it on boot.
For USB controllers this is usually on a 10-15 minute cycle. It may use a similar service startup cycle for audio hardware.
Is your Vista image in 'snapshot=off' mode?
Simon
----------------------------------------
> From: dirk.heinrichs@altum.de
> To: kvm@vger.kernel.org
> Subject: Audio starts working several hours after starting Windows Vista guest
> Date: Sun, 30 Sep 2012 09:34:06 +0200
>
> Hello,
>
> since a week or two, I have a very strange problem with audio output on a
> Windows Vista guest. Right after booting the guest, audio does not work. If I
> leave the guest running for some hours (don't know how many, I usually try
> again next day), audio output works fine.
>
> I'm using es1370 emulation, but I get the same results with the other
> alternatives, too.
>
> Guest: Windows Vista SP1 32bit
>
> Host: Ubuntu 12.10 64bit
> % dpkg --list|grep -e kvm -e qemu
> ii kvm-ipxe 1.0.0+git-3.55f6c88-0ubuntu5
> all PXE ROM's for KVM
> ii qemu-common 1.2.0+noroms-0ubuntu2
> all qemu common functionality (bios, documentation, etc)
> ii qemu-kvm 1.2.0+noroms-0ubuntu2
> amd64 Full virtualization on supported hardware
> ii qemu-kvm-spice 1.2.0-2012.09-0ubuntu1
> amd64 Full virtualization on amd64 hardware
> ii qemu-utils 1.2.0+noroms-0ubuntu2
> amd64 qemu utilities
>
> Is this a known problem? What could I do to resolve it?
>
> Thanks...
>
> Dirk
> --
> Dirk Heinrichs <dirk.heinrichs@altum.de>
> Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
> GPG Public Key C2E467BB | Jabber: dirk.heinrichs@altum.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Audio starts working several hours after starting Windows Vista guest
2012-10-01 6:54 ` Veruca Salt
@ 2012-10-01 7:06 ` Dirk Heinrichs
2012-10-01 9:00 ` Veruca Salt
0 siblings, 1 reply; 5+ messages in thread
From: Dirk Heinrichs @ 2012-10-01 7:06 UTC (permalink / raw)
To: kvm
[-- Attachment #1: Type: text/plain, Size: 571 bytes --]
Am Montag 01 Oktober 2012, 06:54:04 schrieb Veruca Salt:
> sometimes when windows detects new hardware on a write-protected image, it
> needs to reinstall it on boot. For USB controllers this is usually on a
> 10-15 minute cycle. It may use a similar service startup cycle for audio
> hardware. Is your Vista image in 'snapshot=off' mode?
I don't think so, but I don't really know. How can I tell?
Bye...
Dirk
--
Dirk Heinrichs <dirk.heinrichs@altum.de>
Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
GPG Public Key C2E467BB | Jabber: dirk.heinrichs@altum.de
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: Audio starts working several hours after starting Windows Vista guest
2012-10-01 7:06 ` Dirk Heinrichs
@ 2012-10-01 9:00 ` Veruca Salt
0 siblings, 0 replies; 5+ messages in thread
From: Veruca Salt @ 2012-10-01 9:00 UTC (permalink / raw)
To: dirk.heinrichs@altum.de, QEMU-KVM Mailing List
----------------------------------------
> From: dirk.heinrichs@altum.de
> To: kvm@vger.kernel.org
> Subject: Re: Audio starts working several hours after starting Windows Vista guest
> Date: Mon, 1 Oct 2012 09:06:57 +0200
>
> Am Montag 01 Oktober 2012, 06:54:04 schrieb Veruca Salt:
>
> > sometimes when windows detects new hardware on a write-protected image, it
> > needs to reinstall it on boot. For USB controllers this is usually on a
> > 10-15 minute cycle. It may use a similar service startup cycle for audio
> > hardware. Is your Vista image in 'snapshot=off' mode?
>
> I don't think so, but I don't really know. How can I tell?
>
> Bye...
>
> Dirk
> --
> Dirk Heinrichs <dirk.heinrichs@altum.de>
> Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
> GPG Public Key C2E467BB | Jabber: dirk.heinrichs@altum.de
If you are using VirtManager, I don't know, as I'm a command line user, but I guess you could google 'make qemu guest writeable' and that might give you some information about checking.
Sorry I can't help more.
Simon
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Audio starts working several hours after starting Windows Vista guest
2012-09-30 7:34 Audio starts working several hours after starting Windows Vista guest Dirk Heinrichs
2012-10-01 6:54 ` Veruca Salt
@ 2012-10-01 14:23 ` Paolo Bonzini
1 sibling, 0 replies; 5+ messages in thread
From: Paolo Bonzini @ 2012-10-01 14:23 UTC (permalink / raw)
To: Dirk Heinrichs; +Cc: kvm
Il 30/09/2012 09:34, Dirk Heinrichs ha scritto:
> Hello,
>
> since a week or two, I have a very strange problem with audio output on a
> Windows Vista guest. Right after booting the guest, audio does not work. If I
> leave the guest running for some hours (don't know how many, I usually try
> again next day), audio output works fine.
>
> I'm using es1370 emulation, but I get the same results with the other
> alternatives, too.
>
> Guest: Windows Vista SP1 32bit
>
> Host: Ubuntu 12.10 64bit
> % dpkg --list|grep -e kvm -e qemu
> ii kvm-ipxe 1.0.0+git-3.55f6c88-0ubuntu5
> all PXE ROM's for KVM
> ii qemu-common 1.2.0+noroms-0ubuntu2
> all qemu common functionality (bios, documentation, etc)
> ii qemu-kvm 1.2.0+noroms-0ubuntu2
> amd64 Full virtualization on supported hardware
> ii qemu-kvm-spice 1.2.0-2012.09-0ubuntu1
> amd64 Full virtualization on amd64 hardware
> ii qemu-utils 1.2.0+noroms-0ubuntu2
> amd64 qemu utilities
>
> Is this a known problem? What could I do to resolve it?
>
> Thanks...
>
> Dirk
>
Please open a bug on Launchpad. It will be examined by the Ubuntu
maintainers and possibly forwarded to the QEMU project.
Paolo
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-10-01 14:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-30 7:34 Audio starts working several hours after starting Windows Vista guest Dirk Heinrichs
2012-10-01 6:54 ` Veruca Salt
2012-10-01 7:06 ` Dirk Heinrichs
2012-10-01 9:00 ` Veruca Salt
2012-10-01 14:23 ` Paolo Bonzini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.