Re: [meta-ti] [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support

[rahul sharma <r-sharma3@ti.com>]

On 22/10/26 01:20, Denys Dmytriyenko wrote:
> On Wed, Oct 21, 2026 at 08:22:13PM +0530, Rahul Sharma via lists.yoctoproject.org wrote:
>> Add U-Boot configuration fragments for DSI display support with
>> Raspberry Pi panel on AM62L EVM.
>>
>> The fragments enable:
>> - am62x_a53_splashscreen.config: Splash screen on Cortex-A53
>> - k3_a53_dsi.config: DSI support for K3 Cortex-A53
>> - am62lx_evm_dsi_rpi_panel.config: DSI Raspberry Pi panel support
>>
>> Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
>> ---
>>   meta-ti-bsp/conf/machine/am62lxx-evm.conf | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> index 7a422617..e3d3bdd9 100644
>> --- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> +++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> @@ -26,3 +26,6 @@ UBOOT_DTB_LOADADDRESS = "0x84f00000"
>>   UBOOT_DTBO_LOADADDRESS = "0x84f80000"
>>   
>>   TFA_BOARD = "am62lx-evm"
>> +
>> +# DSI config fragments for display support
>> +UBOOT_FRAGMENTS = "am62x_a53_splashscreen.config k3_a53_dsi.config am62lx_evm_dsi_rpi_panel.config"
> 
> Do these config fragments exist in every U-Boot version we support?
> https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/u-boot
> 
> Same question for the other patch.
> 

Hi Denys,

This config fragment was added in 12.1 SDK release happened in July 
2026. So, this is available only in ti-u-boot-2026.01 branch. I have 
sent v2 with corrected version along with corrected Yocto version.

BR,
Rahul