[PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel

[PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel

[Rahul Sharma]

Add U-Boot configuration fragment for OLDI display support with
Microtips MF101HIE panel on AM62P5 EVM.

The fragment am62p5_j722s_evm_oldi-microtips-mf101hie-panel.config
enables OpenLDI/LVDS Display Interface support for the panel.

Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
---
 meta-ti-bsp/conf/machine/am62pxx-evm.conf | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/meta-ti-bsp/conf/machine/am62pxx-evm.conf b/meta-ti-bsp/conf/machine/am62pxx-evm.conf
index cbae21c4..c37f06d9 100644
--- a/meta-ti-bsp/conf/machine/am62pxx-evm.conf
+++ b/meta-ti-bsp/conf/machine/am62pxx-evm.conf
@@ -48,3 +48,6 @@ IMAGE_BOOT_FILES += "${ECDSA_BOOT_FILES}"
 # For AM62P tisdk-display-cluster image, splash screen is handled by SBL.
 # Hence, disable the A53 based splash screen using the am62x_evm_prune_splashscreen.config fragment present in ti-u-boot tree
 UBOOT_FRAGMENTS = "${@oe.utils.conditional('DISPLAY_CLUSTER_ENABLE', '1', 'am62x_evm_prune_splashscreen.config', '', d)}"
+
+# OLDI config fragment for Microtips MF101HIE panel display support
+UBOOT_FRAGMENTS += "am62p5_j722s_evm_oldi-microtips-mf101hie-panel.config"
-- 
2.34.1

[PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support

[Rahul Sharma]

Add U-Boot configuration fragments for DSI display support with
Raspberry Pi panel on AM62L EVM.

The fragments enable:
- am62x_a53_splashscreen.config: Splash screen on Cortex-A53
- k3_a53_dsi.config: DSI support for K3 Cortex-A53
- am62lx_evm_dsi_rpi_panel.config: DSI Raspberry Pi panel support

Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
---
 meta-ti-bsp/conf/machine/am62lxx-evm.conf | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
index 7a422617..e3d3bdd9 100644
--- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf
+++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
@@ -26,3 +26,6 @@ UBOOT_DTB_LOADADDRESS = "0x84f00000"
 UBOOT_DTBO_LOADADDRESS = "0x84f80000"
 
 TFA_BOARD = "am62lx-evm"
+
+# DSI config fragments for display support
+UBOOT_FRAGMENTS = "am62x_a53_splashscreen.config k3_a53_dsi.config am62lx_evm_dsi_rpi_panel.config"
-- 
2.34.1

Re: [PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel

[PRC Automation]

meta-ti / na / 20261021145213.853962-1-r-sharma3

PRC Results: FAIL

=========================================================
  check-yocto-patches: PASS
=========================================================
Patches
----------------------------------------
WARN - [PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel
    WARN: Missing branches specifier [master/scarthgap/XXXXX]. (META-2)
        patch:79
            Subject: [PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel
    
    For details on the above errors/warnings visit: https://lists.yoctoproject.org/g/meta-ti/wiki/40887
WARN - [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support
    WARN: Missing branches specifier [master/scarthgap/XXXXX]. (META-2)
        patch:80
            Subject: [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support
    
    For details on the above errors/warnings visit: https://lists.yoctoproject.org/g/meta-ti/wiki/40887



=========================================================
  apply-yocto-patch: PASS
=========================================================
master
=====================
Summary:
- Patch Series: [PATCH 1/2] am62pxx-evm: Add OLDI config fragment for Microtips MF101HIE panel
- Submitter: From: Rahul Sharma <r-sharma3@ti.com>
- Date: Date: Wed, 21 Oct 2026 20:22:12 +0530
- Num Patches: 2
- Mailing List (public inbox) Commit SHA: 8e9e4fc93fb2e86165f97d122e44c3c3da62624f

Applied to:
- Repository: lcpd-prc-meta-ti
- Base Branch: master-wip
- Commit Author: Ryan Eatmon <reatmon@ti.com>
- Commit Subject: Revert "k3r5: Fix mc:k3r5:libgcc build error"
- Commit SHA: 03c17fcac2fac1f2b7f77663ffba8cee77f2de8e

Patches
----------------------------------------
All patches applied



=========================================================
  check-yocto-repo: FAIL
=========================================================
master
=====================
FAIL
    WARN: .bbappend files might need a guard to make them check-layer compliant. (GUARD-1)
        meta-ti-bsp/dynamic-layers/security-layer/recipes-kernel/linux/linux-ti-staging_%.bbappend
    
    WARN: You might need a " " as the first character for the :append. (APPEND-2)
        meta-ti-bsp/dynamic-layers/security-layer/recipes-ti/initramfs/ti-core-initramfs.bbappend:2
            TI_CORE_INITRAMFS_EXTRA_INSTALL:append = "${@' initramfs-module-dmverity cryptsetup util-linux-mount' if d.getVar('DM_VERITY_IMAGE') else ''}"
    
    WARN: .bbappend files might need a guard to make them check-layer compliant. (GUARD-1)
        meta-ti-bsp/dynamic-layers/security-layer/recipes-ti/initramfs/ti-core-initramfs.bbappend
    
    For details on the above errors/warnings visit: https://lists.yoctoproject.org/g/meta-ti/wiki/40887

Re: [meta-ti] [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support

[Denys Dmytriyenko]

On Wed, Oct 21, 2026 at 08:22:13PM +0530, Rahul Sharma via lists.yoctoproject.org wrote:
> Add U-Boot configuration fragments for DSI display support with
> Raspberry Pi panel on AM62L EVM.
> 
> The fragments enable:
> - am62x_a53_splashscreen.config: Splash screen on Cortex-A53
> - k3_a53_dsi.config: DSI support for K3 Cortex-A53
> - am62lx_evm_dsi_rpi_panel.config: DSI Raspberry Pi panel support
> 
> Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
> ---
>  meta-ti-bsp/conf/machine/am62lxx-evm.conf | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
> index 7a422617..e3d3bdd9 100644
> --- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf
> +++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
> @@ -26,3 +26,6 @@ UBOOT_DTB_LOADADDRESS = "0x84f00000"
>  UBOOT_DTBO_LOADADDRESS = "0x84f80000"
>  
>  TFA_BOARD = "am62lx-evm"
> +
> +# DSI config fragments for display support
> +UBOOT_FRAGMENTS = "am62x_a53_splashscreen.config k3_a53_dsi.config am62lx_evm_dsi_rpi_panel.config"

Do these config fragments exist in every U-Boot version we support?
https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/u-boot

Same question for the other patch.

-- 
Denys

Re: [meta-ti] [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support

[Ryan Eatmon]

On 10/21/2026 2:50 PM, Denys Dmytriyenko wrote:
> On Wed, Oct 21, 2026 at 08:22:13PM +0530, Rahul Sharma via lists.yoctoproject.org wrote:
>> Add U-Boot configuration fragments for DSI display support with
>> Raspberry Pi panel on AM62L EVM.
>>
>> The fragments enable:
>> - am62x_a53_splashscreen.config: Splash screen on Cortex-A53
>> - k3_a53_dsi.config: DSI support for K3 Cortex-A53
>> - am62lx_evm_dsi_rpi_panel.config: DSI Raspberry Pi panel support
>>
>> Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
>> ---
>>   meta-ti-bsp/conf/machine/am62lxx-evm.conf | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> index 7a422617..e3d3bdd9 100644
>> --- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> +++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> @@ -26,3 +26,6 @@ UBOOT_DTB_LOADADDRESS = "0x84f00000"
>>   UBOOT_DTBO_LOADADDRESS = "0x84f80000"
>>   
>>   TFA_BOARD = "am62lx-evm"
>> +
>> +# DSI config fragments for display support
>> +UBOOT_FRAGMENTS = "am62x_a53_splashscreen.config k3_a53_dsi.config am62lx_evm_dsi_rpi_panel.config"
> 
> Do these config fragments exist in every U-Boot version we support?
> https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/u-boot
> 
> Same question for the other patch.

Good question... I didn't think about that.


-- 
Ryan Eatmon                reatmon@ti.com
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS

Re: [meta-ti] [PATCH 2/2] am62lxx-evm: Add DSI config fragments for display support

[rahul sharma]

On 22/10/26 01:20, Denys Dmytriyenko wrote:
> On Wed, Oct 21, 2026 at 08:22:13PM +0530, Rahul Sharma via lists.yoctoproject.org wrote:
>> Add U-Boot configuration fragments for DSI display support with
>> Raspberry Pi panel on AM62L EVM.
>>
>> The fragments enable:
>> - am62x_a53_splashscreen.config: Splash screen on Cortex-A53
>> - k3_a53_dsi.config: DSI support for K3 Cortex-A53
>> - am62lx_evm_dsi_rpi_panel.config: DSI Raspberry Pi panel support
>>
>> Signed-off-by: Rahul Sharma <r-sharma3@ti.com>
>> ---
>>   meta-ti-bsp/conf/machine/am62lxx-evm.conf | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> index 7a422617..e3d3bdd9 100644
>> --- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> +++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf
>> @@ -26,3 +26,6 @@ UBOOT_DTB_LOADADDRESS = "0x84f00000"
>>   UBOOT_DTBO_LOADADDRESS = "0x84f80000"
>>   
>>   TFA_BOARD = "am62lx-evm"
>> +
>> +# DSI config fragments for display support
>> +UBOOT_FRAGMENTS = "am62x_a53_splashscreen.config k3_a53_dsi.config am62lx_evm_dsi_rpi_panel.config"
> 
> Do these config fragments exist in every U-Boot version we support?
> https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/u-boot
> 
> Same question for the other patch.
> 

Hi Denys,

This config fragment was added in 12.1 SDK release happened in July 
2026. So, this is available only in ti-u-boot-2026.01 branch. I have 
sent v2 with corrected version along with corrected Yocto version.

BR,
Rahul