[U-Boot-Users] how to u-boot in LPC2468 board using uClinux

[U-Boot-Users] how to u-boot in LPC2468 board using uClinux

[anand]

do any one have u-boot.bin file for LPC2468
i downloaded u-boot-1.1.6
but i din't get the u-boot prombt in the terminal window its gets struck in the
starting display itself

anyone pls help 
thanks in advance

[U-Boot] how to u-boot in LPC2468 board using uClinux

[Shashidhar.H.G]

Hi,

I'm trying to port uCLinux on to the LPC 2468-16 OEM Board.
.HEX file is been generated by following the steps (Section 10) given in the
document (Getting_started_with_uClinux), and now am trying to flash the same
.HEX file to the board using Flash Magic tool and am facing some issue,
please find the attachment for Error Snapshot.
 
On target side, all the necessary setting has been done including the jumper
setting given in LPC2468_OEM_Board_Users_Guide.
 
but i din't get the u-boot prompt in the terminal window its gets struck in
the
starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG
Error.jpg.JPG 

Please help me out to resolve this.

--
With Regards,
Shashidhar.H.G
Associate Software Engineer.
Dearborn Electronics India Pvt. Ltd.


-- 
View this message in context: http://old.nabble.com/how-to-u-boot-in-LPC2468-board-using-uClinux-tp18555879p29815748.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot] how to u-boot in LPC2468 board using uClinux

[Detlev Zundel]

Hi Shashidhar.H.G,

> I'm trying to port uCLinux on to the LPC 2468-16 OEM Board.

You may have noticed that this is the U-Boot mailing list.  If you have
trouble with uCLinux, the linux-arm mailing list is more to the point.

> .HEX file is been generated by following the steps (Section 10) given in the
> document (Getting_started_with_uClinux), and now am trying to flash the same
> .HEX file to the board using Flash Magic tool and am facing some issue,
> please find the attachment for Error Snapshot.

I have no clue what document you are talking about, sorry.

> On target side, all the necessary setting has been done including the jumper
> setting given in LPC2468_OEM_Board_Users_Guide.
>  
> but i din't get the u-boot prompt in the terminal window its gets struck in
> the
> starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG
> Error.jpg.JPG 

This seems like a general problem outside the scope of U-Boot.  Have you
communicated with the board previously at all?  Are the cables correct?

Cheers
  Detlev

-- 
... the tools we are trying to use and the language or notation we are using to
express or record our thoughts,  are the major factors  determining what we can
think or express at all!
                                        -- Edsger W. Dijkstra
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de