* [U-Boot] Error during NAND access
@ 2010-10-19 13:03 alex889
0 siblings, 0 replies; only message in thread
From: alex889 @ 2010-10-19 13:03 UTC (permalink / raw)
To: u-boot
Hi,
I have strange phenomena.
I have DM365 baaed board.
In some boards (Not all of them), I get this strange case:
Accessing the NAND (Erase/write), like with saveenv command, followed by
Ethernet access (TFTP/PING) stuck the SW.
Accessing the NAND without prior access to ETHERNET works fine.
I tried to debug this with TI code composer studio.
When accessing the NAND, it seems that the CPUs data bus is hung, and I get
the following message from code composer:
Warning:
0x40000020/-1032 @ marker 1022
Warning during: Execution,
The pipeline is stalled owing to 'data bus not ready'
Did you ever encounter such a problem?
Do you know if it is caused by HW problem (Corrupt NAND/DM365), or a fixable
SW bug?
Thanks in advance
Alex
--
View this message in context: http://old.nabble.com/Error-during-NAND-access-tp29999994p29999994.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-10-19 13:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-19 13:03 [U-Boot] Error during NAND access alex889
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.