All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Milesi <lorenzo.milesi@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Problems with HDa
Date: Fri, 27 May 2005 10:39:35 +0200	[thread overview]
Message-ID: <29c147bd05052701397c573a99@mail.gmail.com> (raw)
In-Reply-To: <s5h3bsbr7f9.wl@alsa2.suse.de>

[-- Attachment #1: Type: text/plain, Size: 1245 bytes --]

Hi

Thanks for your reply.
We could do some testing yesterday, but they were unsuccessful.

As you told us, we downloaded 1.0.9rc4 and compiled modules from that.
We tried all the possible models using module=3jack in the modprobe
command, but noone of them worked.
Then we tried making modules with debug enabled, and modprobing with
module=test.
With an aplay going in another session we tried all the possible pin
combinations, but we got no output.

As you requested, in case of failure, I'm attaching the proc file.

I hope we can solve this issue.

Thank you very much.
Maxxer

> If the driver is loaded and doesn't complain like above, the silent
> problem is likely the wrong PIN assignment.
> For ALC880 codec (you can check it in /proc/asound/card0/codec#*
> file), try a different "model" module option.  See
> ALSA-Configuration.txt for details.  Make sure that you use the
> latest 1.0.9rc4!
> 
> If none of models matches your device, try to build drivers with debug
> option and set model=test.  This will enable almost all available
> controls for testing.  Check different PIN configurations via
> alsamixer, and report it to here together with the content of
> /proc/asound/card0/codec#* files.

[-- Attachment #2: alsa.txt --]
[-- Type: text/plain, Size: 6575 bytes --]

Codec: Realtek ALC880
Address: 0
Vendor Id: 0x10ec0880
Subsystem Id: 0x0
Revision Id: 0x90500
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 7
     0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 7
     0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  PCM: rates 0x160, bits 0x1e, types 0x1
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
  Amp-In vals: 0x29 0x29
  Connection: 8
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x3c 0x3c
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x34 0x34
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x35 0x35
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x2f 0x2f
  Connection: 2
     0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x083f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x083f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x083f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 1
     0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x00 0x00
  Pincap 0x083f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x21: IN
  Connection: 1
     0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 1
     0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x21: IN
  Connection: 1
     0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x20: IN
  Connection: 1
     0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x0820: IN
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x0810: OUT
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x0820: IN
  Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono


  reply	other threads:[~2005-05-27  8:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-25  7:44 Problems with HDa Lorenzo Milesi
2005-05-25  9:17 ` Takashi Iwai
2005-05-27  8:39   ` Lorenzo Milesi [this message]
2005-05-27  9:21     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29c147bd05052701397c573a99@mail.gmail.com \
    --to=lorenzo.milesi@gmail.com \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.