Re: [PATCH v3] i2c: tegra: Add the ACPI support

[Dmitry Osipenko <digetx@gmail.com>]

25.11.2021 12:07, Akhil R пишет:
> Add support for the ACPI based device registration so that the driver
> can be also enabled through ACPI table.
> 
> This does not include the ACPI support for Tegra VI and DVC I2C.
> 
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> ---
>  drivers/i2c/busses/i2c-tegra.c | 52 ++++++++++++++++++++++++++++++++----------
>  1 file changed, 40 insertions(+), 12 deletions(-)
> 
> v3 changes
>   * removed acpi_has_method check.
>   * moved dev_err_probe to init_reset function to make it consistent with
> 	init_clocks.
>   * Updates in commit message as suggested.
> 
> v2 - https://lkml.org/lkml/2021/11/23/82
> v1 - https://lkml.org/lkml/2021/11/19/393

Akhil, the patch looks almost good, thank you. Please see one minor
question below.

> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index c883044..b889eb3 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -6,6 +6,7 @@
>   * Author: Colin Cross <ccross@android.com>
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> @@ -608,6 +609,7 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
>  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
>  {
>  	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
> +	acpi_handle handle = ACPI_HANDLE(i2c_dev->dev);

...
> +static int tegra_i2c_init_reset(struct tegra_i2c_dev *i2c_dev)
> +{
> +	if (has_acpi_companion(i2c_dev->dev))
> +		return 0;

Can we use ACPI_HANDLE() everywhere instead of has_acpi_companion()? For
consistency. I guess that's what Andy was asking about in v1?