From: subashab@codeaurora.org
To: "Aleksander Morgado" <aleksander@aleksander.es>,
"Bjørn Mork" <bjorn@mork.no>
Cc: Daniele Palmas <dnlplm@gmail.com>,
Network Development <netdev@vger.kernel.org>,
Sean Tranchetti <stranche@codeaurora.org>
Subject: Re: RMNET QMAP data aggregation with size greater than 16384
Date: Fri, 06 Aug 2021 16:30:42 -0600 [thread overview]
Message-ID: <2c2d1204842f457bb0d0b2c4cd58847d@codeaurora.org> (raw)
In-Reply-To: <CAAP7ucLDFPMG08syrcnKKrX-+MS4_-tpPzZSfMOD6_7G-zq4gQ@mail.gmail.com>
> That default fixed size you're suggesting for the rx_urb_size, isn't
> it supposed to have the same logical meaning as RMNET_MAX_PACKET_SIZE
> at the end?
RMNET_MAX_PACKET_SIZE is the maximum size for uplink. I probably should
have
named it more clearly. We would need a different value for downlink.
>> Yes, I think it would be good to make the driver DTRT automatically.
>> Coding driver specific quirks into ModemManager might work, but it
>> feels
>> wrong to work around a Linux driver bug. We don't have to do that. We
>> can fix the driver.
>> Why can't we break the rx_urb_size dependency on MTU automatically
>> when
>> pass_through or qmi_wwan internal muxing is enabled? Preferably with
>> some fixed default size which would Just Work for everyone.
>>
>
Would something like this work-
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6a2e4f8..c49827e 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -75,6 +75,8 @@ struct qmimux_priv {
u8 mux_id;
};
+#define MAP_DL_URB_SIZE (32768)
+
static int qmimux_open(struct net_device *dev)
{
struct qmimux_priv *priv = netdev_priv(dev);
@@ -303,6 +305,33 @@ static void qmimux_unregister_device(struct
net_device *dev,
dev_put(real_dev);
}
+static int qmi_wwan_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct qmi_wwan_state *info = (void *)&dev->data;
+ int old_rx_urb_size = dev->rx_urb_size;
+
+ /* mux and pass through modes use a fixed rx_urb_size and the
value
+ * is independent of mtu
+ */
+ if (info->flags & (QMI_WWAN_FLAG_MUX |
QMI_WWAN_FLAG_PASS_THROUGH)) {
+ if (old_rx_urb_size == MAP_DL_URB_SIZE)
+ return 0;
+
+ if (old_rx_urb_size < MAP_DL_URB_SIZE) {
+ usbnet_pause_rx(dev);
+ usbnet_unlink_rx_urbs(dev);
+ usbnet_resume_rx(dev);
+ usbnet_update_max_qlen(dev);
+ }
+
+ return 0;
+ }
+
+ /* rawip mode uses existing logic of setting rx_urb_size based
on mtu */
+ return usbnet_change_mtu(net, new_mtu);
+}
+
static void qmi_wwan_netdev_setup(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -326,7 +355,7 @@ static void qmi_wwan_netdev_setup(struct net_device
*net)
}
/* recalculate buffers after changing hard_header_len */
- usbnet_change_mtu(net, net->mtu);
+ qmi_wwan_change_mtu(net, net->mtu);
}
static ssize_t raw_ip_show(struct device *d, struct device_attribute
*attr, char *buf)
@@ -433,6 +462,7 @@ static ssize_t add_mux_store(struct device *d,
struct device_attribute *attr, c
if (!ret) {
info->flags |= QMI_WWAN_FLAG_MUX;
ret = len;
+ qmi_wwan_change_mtu(dev->net, dev->net->mtu);
}
err:
rtnl_unlock();
@@ -514,6 +544,8 @@ static ssize_t pass_through_store(struct device *d,
else
info->flags &= ~QMI_WWAN_FLAG_PASS_THROUGH;
+ qmi_wwan_change_mtu(dev->net, dev->net->mtu);
+
return len;
}
@@ -643,7 +675,7 @@ static const struct net_device_ops
qmi_wwan_netdev_ops = {
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
- .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_change_mtu = qmi_wwan_change_mtu,
.ndo_get_stats64 = dev_get_tstats64,
.ndo_set_mac_address = qmi_wwan_mac_addr,
.ndo_validate_addr = eth_validate_addr,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-08-06 22:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-31 22:45 RMNET QMAP data aggregation with size greater than 16384 Aleksander Morgado
2021-08-05 19:10 ` subashab
2021-08-05 20:32 ` Aleksander Morgado
[not found] ` <CAGRyCJHYkH4_FvTzk7BFwjMN=iOTN_Y2=4ueY=s3rJMQO9j7uw@mail.gmail.com>
2021-08-05 21:01 ` Aleksander Morgado
2021-08-05 21:12 ` Daniele Palmas
2021-08-05 22:57 ` subashab
2021-08-06 14:08 ` Aleksander Morgado
2021-08-06 18:42 ` subashab
2021-08-06 19:58 ` Bjørn Mork
2021-08-06 20:22 ` Aleksander Morgado
2021-08-06 22:30 ` subashab [this message]
2021-08-07 10:55 ` Bjørn Mork
2021-08-09 21:40 ` subashab
2021-08-12 12:02 ` Daniele Palmas
2021-08-13 6:21 ` subashab
2021-08-13 6:25 ` Bjørn Mork
2021-09-03 13:55 ` Daniele Palmas
2021-09-08 6:21 ` subashab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c2d1204842f457bb0d0b2c4cd58847d@codeaurora.org \
--to=subashab@codeaurora.org \
--cc=aleksander@aleksander.es \
--cc=bjorn@mork.no \
--cc=dnlplm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=stranche@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.