* Output of Dmesg 2.4.21 kernel.
@ 2003-07-23 13:12 xxxyyyzzz85
0 siblings, 0 replies; only message in thread
From: xxxyyyzzz85 @ 2003-07-23 13:12 UTC (permalink / raw)
To: linux-smp
Hi,
I'm a newbee of Linux. I use Debian 3.0 rev 1. Few days ago, I
recompiled kernel 2.4.21. I have a problems with networks and seeing the
output of dmesg for detect these problems, I saw a message that requests
that email you. So I'm doing this.
I have a P4 2.53 GHZ mounted in Aopen AX45H-8X Max (see Aopen's web page
for details).
The output for dmesg is the following. Not of all. :-D
Linux version 2.4.21 (root@canostra.xarxa) (gcc version 2.95.4 20011002
(Debian prerelease)) #2 SMP Wed Jul 23 13:21:19 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
767MB LOWMEM available.
found SMP MP-table at 000f5a50
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f7510
RSD PTR v0 [AOPEN ]
__va_range(0x2fff3000, 0x68): idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [AOPEN AWRDACPI 16944.11825]
__va_range(0x2fff3040, 0x24): idx=8 mapped at ffff6000
__va_range(0x2fff3040, 0x74): idx=8 mapped at ffff6000
ACPI table found: FACP v1 [AOPEN AWRDACPI 16944.11825]
__va_range(0x2fff6fc0, 0x24): idx=8 mapped at ffff6000
__va_range(0x2fff6fc0, 0x68): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [AOPEN AWRDACPI 16944.11825]
__va_range(0x2fff6fc0, 0x68): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
LAPIC (acpi_id[0x0001] id[0x1] enabled[0])
CPU 1 (0x0100) disabled
IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0])
LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
2 CPUs total
Local APIC address fee00000
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: BOOT_IMAGE=Linux_2-4-21(b) ro root=341
Initializing CPU#0
Detected 2539.124 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5072.48 BogoMIPS
Memory: 774044k/786368k available (1966k kernel code, 11936k reserved,
815k data, 124k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
per-CPU timeslice cutoff: 1462.56 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 24.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178014
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0014
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 001 01 1 1 0 1 0 1 1 B1
14 001 01 1 1 0 1 0 1 1 B9
15 001 01 1 1 0 1 0 1 1 C1
16 001 01 1 1 0 1 0 1 1 C9
17 001 01 1 1 0 1 0 1 1 D1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2539.1720 MHz.
..... host bus clock speed is 133.6406 MHz.
cpu: 0, clocks: 1336406, slice: 668203
CPU0<T0:1336400,T1:668192,D:5,S:668203,C:1336406>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
PCI->APIC IRQ transform: (B0,I2,P1) -> 17
PCI->APIC IRQ transform: (B0,I2,P0) -> 17
PCI->APIC IRQ transform: (B0,I2,P2) -> 18
PCI->APIC IRQ transform: (B0,I3,P0) -> 20
PCI->APIC IRQ transform: (B0,I3,P1) -> 21
PCI->APIC IRQ transform: (B0,I3,P2) -> 22
PCI->APIC IRQ transform: (B0,I3,P3) -> 23
PCI->APIC IRQ transform: (B0,I8,P0) -> 18
PCI->APIC IRQ transform: (B0,I9,P0) -> 19
PCI->APIC IRQ transform: (B0,I10,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
gameport0: Emu10k1 Gameport at 0xdc00 size 8 speed 1104 kHz
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xf080d000, 00:50:22:8d:6a:d8, IRQ 19
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Unsupported SiS chipset (device id: 0648), you might want to
try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648 ATA 133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hdb: C/H/S=38309/16/255 from BIOS ignored
hda: QUANTUM FIREBALLP LM20.5, ATA DISK drive
hdb: ST380023A, ATA DISK drive
blk: queue c0435b60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0435cac, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40132503 sectors (20548 MB) w/1900KiB Cache, CHS=2654/240/63, UDMA(66)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63,
UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Partition check:
hda: hda1
hdb: hdb1 hdb2 hdb3 hdb4
ohci1394: $Rev: 896 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e7104000-e71047ff] Max
Packet=[2048]
raw1394: /dev/raw1394 device initialized
ieee1394: Loaded CMP driver
Intel 810 + AC97 Audio, version 0.24, 13:22:16 Jul 23 2003
i810: SiS 7012 found at IO 0xd400 and 0xd000, MEM 0x0000 and 0x0000, IRQ 18
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Creative EMU10K1 PCI Audio Driver, version 0.20, 13:22:13 Jul 23 2003
emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xd800-0xd81f, IRQ 18
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
host/usb-ohci.c: USB OHCI at membase 0xf0811000, IRQ 20
host/usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-ohci.c: USB OHCI at membase 0xf0813000, IRQ 21
host/usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-ohci.c: USB OHCI at membase 0xf0815000, IRQ 22
host/usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbscanner
scanner.c: 0.4.12:USB Scanner Driver
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 124k freed
Adding Swap: 1488304k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 03:43) ...
journal-1153: found in header: first_unflushed_offset 2314,
last_flushed_trans_id 706
journal-1206: Starting replay from offset 2314, trans_id 707
journal-1299: Setting newest_mount_id to 136
Using r5 hash to sort names
ReiserFS version 3.6.25
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-07-23 13:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-23 13:12 Output of Dmesg 2.4.21 kernel xxxyyyzzz85
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.