Re: [PATCH] dt-bindings: interrupt-controller: Convert snps,archs-idu-intc to DT schema

[Vineet Gupta <vineet.gupta@linux.dev>]

On 5/5/25 07:48, Rob Herring (Arm) wrote:
> Convert the ARC-HS Interrupt Distribution Unit interrupt controller
> binding to schema format. It's a straight-forward conversion of the
> typical interrupt controller.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>


Acked-by: Vineet Gupta <vgupta@kernel.org>

Thx,
-Vineet

> ---
>  .../snps,archs-idu-intc.txt                   | 46 ------------------
>  .../snps,archs-idu-intc.yaml                  | 48 +++++++++++++++++++
>  2 files changed, 48 insertions(+), 46 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
> deleted file mode 100644
> index a5c1db95b3ec..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -* ARC-HS Interrupt Distribution Unit
> -
> -  This optional 2nd level interrupt controller can be used in SMP configurations
> -  for dynamic IRQ routing, load balancing of common/external IRQs towards core
> -  intc.
> -
> -Properties:
> -
> -- compatible: "snps,archs-idu-intc"
> -- interrupt-controller: This is an interrupt controller.
> -- #interrupt-cells: Must be <1> or <2>.
> -
> -  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
> -  Number N of the particular interrupt line of IDU corresponds to the line N+24
> -  of the core interrupt controller.
> -
> -  The (optional) second cell specifies any of the following flags:
> -    - bits[3:0] trigger type and level flags
> -        1 = low-to-high edge triggered
> -        2 = NOT SUPPORTED (high-to-low edge triggered)
> -        4 = active high level-sensitive <<< DEFAULT
> -        8 = NOT SUPPORTED (active low level-sensitive)
> -  When no second cell is specified, the interrupt is assumed to be level
> -  sensitive.
> -
> -  The interrupt controller is accessed via the special ARC AUX register
> -  interface, hence "reg" property is not specified.
> -
> -Example:
> -	core_intc: core-interrupt-controller {
> -		compatible = "snps,archs-intc";
> -		interrupt-controller;
> -		#interrupt-cells = <1>;
> -	};
> -
> -	idu_intc: idu-interrupt-controller {
> -		compatible = "snps,archs-idu-intc";
> -		interrupt-controller;
> -		interrupt-parent = <&core_intc>;
> -		#interrupt-cells = <1>;
> -	};
> -
> -	some_device: serial@c0fc1000 {
> -		interrupt-parent = <&idu_intc>;
> -		interrupts = <0>;	/* upstream idu IRQ #24 */
> -	};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
> new file mode 100644
> index 000000000000..286a964f23e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/snps,archs-idu-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARC-HS Interrupt Distribution Unit
> +
> +maintainers:
> +  - Vineet Gupta <vgupta@kernel.org>
> +
> +description: >
> +  ARC-HS Interrupt Distribution Unit is an optional 2nd level interrupt
> +  controller which can be used in SMP configurations for dynamic IRQ routing,
> +  load balancing of common/external IRQs towards core intc.
> +
> +  The interrupt controller is accessed via the special ARC AUX register
> +  interface, hence "reg" property is not specified.
> +
> +properties:
> +  compatible:
> +    const: snps,archs-idu-intc
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description: |
> +      Number of interrupt specifier cells:
> +        - 1: only a common IRQ is specified.
> +        - 2: a second cell encodes trigger type and level flags:
> +            1 = low-to-high edge triggered
> +            4 = active high level-sensitive (default)
> +    enum: [1, 2]
> +
> +required:
> +  - compatible
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    interrupt-controller {
> +        compatible = "snps,archs-idu-intc";
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +    };


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc