From: Major A <andras.g.major@gmail.com>
To: u-boot@lists.denx.de
Subject: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
Date: Tue, 28 Apr 2020 16:21:25 +0200 [thread overview]
Message-ID: <2fd8cf69-9ca4-6126-2bd2-ba1d7987a54e@gmail.com> (raw)
In-Reply-To: <33d0c9cf-6d9f-a251-2313-0747ff9d6644@xilinx.com>
Hi Michal,
> I am missing here loading pmufw elf file.
See below the entire log.
Cheers,
Andr?s
****** Xilinx System Debugger (XSDB) v2019.2
**** Build date : Nov 6 2019-22:12:26
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
xsdb% source script
attempting to launch hw_server
****** Xilinx hw_server v2019.2
**** Build date : Nov 6 2019 at 22:12:23
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application
****** Xilinx hw_server v2019.2
**** Build date : Nov 6 2019 at 22:12:23
** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application
INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121
Downloading Program -- C:/home/u-boot/pmufw.elf
section, .vectors.reset: 0xffdc0000 - 0xffdc0007
section, .vectors.sw_exception: 0xffdc0008 - 0xffdc000f
section, .vectors.interrupt: 0xffdc0010 - 0xffdc0017
section, .vectors.hw_exception: 0xffdc0020 - 0xffdc0027
section, .text: 0xffdc0050 - 0xffdd108b
section, .rodata: 0xffdd108c - 0xffdd31a3
section, .data: 0xffdd31a4 - 0xffdd749b
section, .sdata2: 0xffdd749c - 0xffdd749f
section, .sdata: 0xffdd74a0 - 0xffdd749f
section, .sbss: 0xffdd74a0 - 0xffdd749f
section, .bss: 0xffdd74a0 - 0xffddb4cb
section, .srdata: 0xffddb4cc - 0xffddbdef
section, .stack: 0xffddbdf0 - 0xffddcdef
section, .xpbr_serv_ext_tbl: 0xffddf6e0 - 0xffddfadf
100% 0MB 0.2MB/s 00:00
Setting PC to Program Start Address 0xffdd02a0
Successfully downloaded C:/home/u-boot/pmufw.elf
Info: MicroBlaze PMU (target 13) Running
Info: Cortex-A53 #0 (target 9) Stopped at 0xffff0000 (External Debug
Request)
100% 0MB 0.2MB/s 00:00
Successfully downloaded C:/home/u-boot/spl/u-boot-spl-dtb.bin
Info: Cortex-A53 #0 (target 9) Running
Info: Breakpoint 0 status:
target 9: {Address: 0xfffcc484 Type: Hardware}
xsdb% Info: Cortex-A53 #0 (target 9) Stopped at 0xfffcc484 (Breakpoint)
udelay() at lib/time.c: 178
178: couldn't open "<u-boot build-dir>/lib/time.c": no such file or
directory
xsdb% bpremove 0
xsdb% dow -data u-boot.itb 0x10000000
100% 1MB 0.2MB/s 00:08
Successfully downloaded C:/home/u-boot/u-boot.itb
xsdb% con
Info: Cortex-A53 #0 (target 9) Running
xsdb% stop
Cannot halt processor core, timeout
xsdb% stop
Cannot halt processor core, timeout
xsdb% ta
1 PS TAP
2 PMU
13 MicroBlaze PMU (Sleeping. No clock)
3 PL
4 PSU
5 RPU (Reset)
6 Cortex-R5 #0 (RPU Reset)
7 Cortex-R5 #1 (RPU Reset)
8 APU
9* Cortex-A53 #0 (Running)
10 Cortex-A53 #1 (Power On Reset)
11 Cortex-A53 #2 (Power On Reset)
12 Cortex-A53 #3 (Power On Reset)
xsdb% con
Already running
xsdb% stop
Cannot halt processor core, timeout
xsdb% ta
1 PS TAP
2 PMU
13 MicroBlaze PMU (Sleeping. No clock)
3 PL
4 PSU
5 RPU (Reset)
6 Cortex-R5 #0 (RPU Reset)
7 Cortex-R5 #1 (RPU Reset)
8 APU
9* Cortex-A53 #0 (Running)
10 Cortex-A53 #1 (Power On Reset)
11 Cortex-A53 #2 (Power On Reset)
12 Cortex-A53 #3 (Power On Reset)
xsdb% rrd
r0: N/A r1: N/A
r2: N/A r3: N/A
r4: N/A r5: N/A
r6: N/A r7: N/A
r8: N/A r9: N/A
r10: N/A r11: N/A
r12: N/A r13: N/A
r14: N/A r15: N/A
r16: N/A r17: N/A
r18: N/A r19: N/A
r20: N/A r21: N/A
r22: N/A r23: N/A
r24: N/A r25: N/A
r26: N/A r27: N/A
r28: N/A r29: N/A
r30: N/A sp: N/A
pc: 00000000fffc78e4 cpsr: N/A
vfp sys
dbg acpu_gic
xsdb% bt
xsdb%
next prev parent reply other threads:[~2020-04-28 14:21 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 11:28 ZynqMP boot: no messages from SPL other than "Debug uart enabled" Major A
2020-03-12 8:15 ` Michal Simek
2020-03-12 9:12 ` Major A
2020-03-12 10:32 ` Michal Simek
2020-03-12 11:38 ` Major A
2020-03-12 11:44 ` Michal Simek
2020-03-12 12:01 ` Major A
2020-03-12 12:06 ` Michal Simek
2020-03-12 13:24 ` Major A
2020-03-12 13:31 ` Michal Simek
2020-03-12 14:19 ` Major A
2020-03-12 15:22 ` Michal Simek
2020-04-23 9:02 ` Major A
2020-04-24 12:14 ` Michal Simek
2020-04-27 22:00 ` Major A
2020-04-28 6:42 ` Michal Simek
2020-04-28 9:29 ` Major A
2020-04-28 9:33 ` Michal Simek
2020-04-28 10:53 ` Major A
2020-04-28 11:16 ` Michal Simek
2020-04-28 11:25 ` Major A
2020-04-28 11:29 ` Michal Simek
2020-04-28 13:34 ` Major A
2020-04-28 13:55 ` Michal Simek
2020-04-28 14:21 ` Major A [this message]
[not found] ` <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
[not found] ` <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
2020-04-30 10:20 ` Fwd: " Major A
[not found] ` <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
2020-04-30 11:01 ` Major A
2020-04-30 11:03 ` Michal Simek
2020-04-30 11:10 ` Major A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2fd8cf69-9ca4-6126-2bd2-ba1d7987a54e@gmail.com \
--to=andras.g.major@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.